Honeywell MX7 Tecton Reference Manual page 77

Option Explanation
Default is blank. Move the cursor to the Filename text box and either type the application path or tap the Browse
Filename button (the ... button). The standard Windows CE Browse dialog is displayed. After selecting the application
from the Browse dialog, tap OK.
Default is blank. Enter the Title to be associated with the application. The assumption is that multiple copies of
Title
the same application may need unique titles in order to differentiate them in the Switchpad.
Arguments Default is blank. Enter the command line parameters for the application in the Arguments text box.
Default is 1. Enter the Order in which the application is to be loaded or presented to the end-user. Applications
Order
are launched in lowest to highest number order and do not need to be sequential.
Default is Disabled. Enable the Internet checkbox to use the End-user Internet Explorer (EUIE.EXE) When the
Internet checkbox is enabled, the Internet Menu and Internet Status are available. See the section titled End-user Internet
Explorer (EUIE) for more details.
See following section titled
Launch
Note: AppLock Administrator Control panel file Launch option does not inter-relate with similarly-named
Button
options contained in other Control Panels.
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when switching between
Global Key applications. The Global Key default key sequence must be defined by the AppLock Administrator. The Global
key is presented to the end-user as the Activation key.
Default is 10 seconds. Enter the number of seconds that Applications must wait before starting to run after
reboot.
Global
Note: Delay (Global) may not be available in all versions of AppLock. You can simulate a Global Delay
Delay
function by setting a delay for the first application (lowest Order) launched and setting the delay to 0 for
all other applications. See Boot Options.
Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu. When enabled the
Input
input panel cannot be enabled or disabled for each individual application, and is available to the user for all
Panel
configured applications.
Clear Tap the Clear button to clear all currently displayed Filename or Application information. The Global settings are
Button not cleared.
Use the left and right scroll buttons to move from application setup screen to application setup screen. The left
Scroll
and right buttons update the information on the screen with the previous or next configured application
Buttons
respectively.
Launch Button.
4-39