Configuring The Mx7 Tecton With Lxeconnect; Install Lxeconnect - Honeywell MX7 Tecton Reference Manual

Configuring the MX7 Tecton with LXEConnect

LXEConnect allows a user to view the MX7 Tecton screen remotely from a PC using an ActiveSync connection:
Requirements: ActiveSync version 4.5 (or higher) must be resident on a Windows XP (desktop/laptop) host computer.
Windows Mobile Device Center (version 6.1 or higher) is required for a Windows Vista/Windows 7 desktop/laptop computer.
ActiveSync is already installed on the MX7 Tecton. The MX7 Tecton is preconfigured to establish a USB ActiveSync
connection to a host PC when the USB cable is attached to the MX7 Tecton and the host PC.

Install LXEConnect

1. Contact Technical Assistance
2. Download the files to a location on your host PC hard drive.
3. Execute the setup.exe file that was copied to the host PC. This setup program installs the LXEConnect utility.
4. Follow the on screen installation prompts. The default installation directory is C:\Program Files\LXE\LXEConnect.
5. When the installation is complete, create a desktop shortcut to the following file: C:\Program
Files\LXE\LXEConnect\LXEConnect.exe. If a different directory was selected during installation, please substitute the
appropriate directory.
6. LXEConnect is now installed on the host PC and ready to use.
for the LXEConnect files.
6-5