Mitsubishi Heavy Industries SRK25GZ-L1 Handbook page 1034

FDC-HKXR
20.4 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER
(1) Remote controller (Optional parts)
FDR,FDUM,FDFL and FDFU series are not provided with AUTO SWING switch.
Panel shown below will appear if you open the cover. All contents of display on the LCD are indicated simultaneously for
the purpose of explanation.
Pull the knob on the cover to this side to open it downward.
Filter sign
When this sign is indicated, clean the filter.
Remote display
This is displayed when the unit is controlled
with an individual controller during normal operation.
(Also displayed when the air conditioner is stopped.)
Central display
This is displayed when the unit is
controlled with the optional central console.
Timer operation display
Contents of timer operation are displayed.
(Also displayed when the air conditioner
is stopped.)
Setting
temperature display
Displays the temperature
that has been set.
Fan speed display
Displays the fan speed that has been set.
Filter reset switch
Use this switch to reset (erase) the filter
sign display.
(Press the switch after cleaning the air filter.)
Cover
Inspection switch
Use this switch when servicing the unit.
Timer switch
Use this switch when selecting contents of timer operation.
Set switch
Use this switch to set a time for the timer.
1032
AUTO DRYCOOLFANHOT KEEP
CENTER REMOTE F I L T E R
PROGRAM TIMER
SET TEMP FAN
FILTER AUTO LIFT
Hi
ON OFF Outdoor No.
A M Mi
P M
Lo
F A N
FILTER
TIMER
RESET
SPEED
T E M P
T I M E
A U T O
SET
CHECK
SWING
Operation mode display
Displays the operation mode that
has been selected.
Heating
preparation display
Operation/
Inspection indicator lamp
During operation: Green lamp flashes.
In case of error: Red lamp flashes.
On/Off switch
Use this switch to start or stop the
air conditioner. First push on the
switch starts the unit and second
push stops it. (The switch can be
operated without opening the cover.)
Return air
temperature display
Displays the return air temperature.
MODE
Note
Indicated value may be different
from actual reading on a thermometer
or other instrument but this is
notnecessarily an error.
Auto swing display
Indicates the swing louver condition.
Mode switch
Use this switch to select operation
modes.
Fan speed switch
Use this switch to set a fan speed.
Auto swing switch
Use this switch to operate or stop
the swing louver.
Temperature/
Time setting switch
Use this switch to set the room
temperature or time on the timer.