Cisco FastHub 100 series Installation Manual page 59

rps4 Page 23 Monday, September 14, 1998 8:19 AM
Step 6
Figure 4-26
Power ON the Cisco RPS. There is one power switch for each of the AC input
power modules. Make sure the power switch for each connected AC cable is
ON (|). (See Figure 4-26.)
Powering ON the Cisco RPS
The Cisco RPS is on and provides power in 10 to 15 seconds. The Cisco RPS is
working properly when all its front-panel LEDs are solid green. If the external
device does not power up, refer to Appendix B, "Troubleshooting the
Cisco RPS."
Connecting Routers and the Cisco MC3810
Connecting Cables 4-23