Cisco FastHub 100 series Installation Manual page 10

rps1 Page 2 Monday, September 14, 1998 8:17 AM
Table 1-1 Cisco RPS-Supported External Devices and Power Configurations
External Device
FastHub 100 series 100BaseT hubs
FastHub 200 series 100BaseT hubs
FastHub 300 series 100BaseT hubs
HP 10BaseT Hub-16M hub
Catalyst 1900 series switches
Catalyst 2820 series switches
Catalyst 2900 series XL switches
Cisco 2500 series routers/access servers
Cisco 2600 series routers
Cisco 3600 series routers
Cisco MC3810 multiservice concentrator
Cisco 4000 series routers
For simplicity, Cisco 2500 series access servers, such as Cisco 2509 or 2511, are
Note
referred to as Cisco 2500 series routers throughout this guide.
Note You may need to order a power adapter plate for your router or concentrator to make
it compatible for use with the Cisco RPS. See Table 3-2, which lists adapter plates and
corresponding product order numbers. Contact Cisco Customer Service at 800 553-6387 or
408 526-7209 for ordering information. (See also the section "Cisco Connection Online"
in the "About This Guide" preface.)
1-2 Cisco Redundant Power System Hardware Installation Guide
Quasi- Fully
Redundant Redundant
Yes Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Redundant With
Reboot
Yes
Yes
Yes
No
Yes
Yes
Yes
No
No
No
No
No