Frymaster Pro H50-Series Service And Parts Manual page 65

ITEM PART #
1 826-1981
826-1980
813-0568
816-0012
810-2198
809-0059
2 200-2124
3 810-2091
4 823-5146
5 823-4662
6
823-4678
823-4708
7
823-4638
823-4640
823-4624
823-4642
823-4639
823-4641
823-4625
823-4643
200-6473
200-6474
8 809-0247
9 816-0625
10 809-0969
11 813-0302
12 826-1720
13 823-3879
14 810-1055
15 810-1668
16 813-0530
17 813-0838
18 106-3470
19 810-2773
20 810-1067
21 813-0165
22 813-0003
23 813-0265
24 813-0342
25 813-0298
26 826-1264
27
826-1785
826-1712
826-1756
826-1757
826-1755
* 106-0675
NOTE: Kit 826-1979 contains four each of roller 810-2198 and 1/4-20 Flange Nut 809-0059.
Pan Assembly, FootPrint Pro Filter (includes 826-1980 and Items 2 and 3)
Pan Assembly, Filter (includes Plug, O-rings, Rollers, and Nuts)
Plug, 1/8-inch NPT Socket Head
O-Ring (two required)
Roller, Filter Pan (See NOTE at bottom of page.)
Nut, 1/4-20 Hex Flange (See NOTE at bottom of page.)
Screen, Sana Grid
Ring, Filter Paper Hold-Down Ring (13.47-inch X 21.41-inch)
Tray, Filter Pan Crumb
Lid, Filter Pan
Tube, 3-inch Center Drain
Open Both Ends
Closed One End
Tube, 3-inch Round Drain (823-4625 illustrated)
Dual Vat, Long (one end closed)
Dual Vat, Long (open both ends)
Dual Vat, Short (one end closed)
Dual Vat, Short (open both ends)
Full Vat, Long (one end closed)
Full Vat, Long (open both ends)
Full Vat, Short (one end closed)
Full Vat, Short (open both ends)
Spreader, Long (open both ends, no drain valve connection)
Spreader, Short (open both ends, no drain valve connection)
Nut, 8-32 Hex Keps
Sleeve, Round Drain Connector
Clamp, Round Drain Sleeve
Elbow, 1/4-inch NPT X 3/8-inch Tube Compression
Tube, 3/8-inch OD Teflon Manifold Vent
Suction Tube, FootPrint Pro Female
Flexline, 5/8-inch OD X 11.50-inch
Adapter, 5/8-inch OD X 1/2-inch Male
Tee, 1/2-inch X 1/2-inch X 1/4-inch Reducing
Nipple, 1/4-inch NPT Close
Solenoid Valve w/Female Pins
Adapter, 1/4-inch NPT to 1/2-inch NPT
Flexline, 5/8-inch OD X 8.50-inch
Elbow, 1/2-inch NPT X 90° Street
Tee, 1/2-inch NPT
Nipple, 1/2-inch NPT X 2.50-inch
Elbow, 1/2-inch NPT X 45° Street
Nipple, 1/2-inch NPT X 2.00-inch
Pump and Gasket Kit (for gasket only, order P/N 816-0093)
Motor and Gasket Kit, 50/60 Hz (for gasket only, order P/N 816-0093)
100V
115V
208V
220-240V
250V
Plumbing Assembly (used with rear flush, page 2-19)
2-12
COMPONENT