C. Tools and Supplies Needed
Before beginning the installation be sure the following
tools and building supplies are available:
Reciprocating saw
Pliers
Hammer
Phillips screwdriver
Flat blade screwdriver
Plumb line
Level
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails
D. Inspect Fireplace and Components
WARNING! Risk of Fire and/or Explosion!
parts could impair safe operation. DO NOT install dam-
aged, incomplete or substitute components. Keep fi re-
place dry.
•
Remove fi replace and components from packaging and
inspect for damage.
•
Vent system components and doors are shipped in
separate packages.
•
Report to your dealer any parts damaged in shipment.
•
Read all the instructions before starting the
installation. Follow these instructions carefully
during the installation to ensure maximum safety
and benefi t.
Heatilator • C40 Constitution • 480-2340 Installation Manual • Rev B 01-29-13
Framing material
Non-combustible sealant
Gloves
Framing square
Electric drill and bits
Safety glasses
Tape measure
Damaged
E. Fireplace System Requirements
The Heatilator fi replace system requirements consist of
the following:
•
Fireplace
-
Firebrick (included with fi replace)
-
Door (included with fi replace)
-
Non-combustible facing material (included with
fi replace)
-
Hearth Extension
•
Outside Air System (hood and collars included with
fi replace)
•
Fascia
•
Chimney System
-
Chimney air kit (included with fi replace, required with
SL300 series chimney)
-
Attic Insulation Shield (included with fi replace)
-
Chimney termination cap
•
Non-combustible fi nish material
Optional components include:
•
Firescreen
•
Lintel Bar
•
Heat Zone Kit
9