Taillamps, Turn Signal, And Stoplamps; Replacement Bulbs - Chevrolet 2007 Corvette Owner's Manual

Taillamps, Turn Signal, and
Stoplamps
To replace a stoplamp, taillamp/turn signal bulb,
do the following:
1. Remove the screw from the top of the lamp
assembly.
2. Tilt out the lamp assembly.
3. Turn the bulb socket one-quarter turn
counterclockwise and pull it out.
374
4. Pull the bulb straight out to remove it from
the socket.
5. Push the new bulb in the bulb socket until
it snaps into place.
6. Reinstall the lamp assembly by first lining
up the tabs on the bottom of the lamp
assembly with the tabs in the vehicle,
then slide it in.
7. Replace the screw at the top of the
lamp assembly.

Replacement Bulbs

Exterior Lamp
Front Parking/
Turn Signal/Daytime
Running Lamp (DRL)
Headlamp, High-Beam Lamp
Sidemarker Lamp
Stoplamp/Taillamp/
Turn Signal Lamp
For replacement bulbs not listed here,
contact your dealer.
Bulb Number
5702KA
H9
W3W
3057KX