Headlamp High/Low-Beam Changer
To change the headlamps from low beam to
high, push the turn signal lever all the way forward.
To change from high to low beam, pull the lever
rearward.
Flash-to-Pass
To use the flash-to-pass feature, briefly pull the
turn signal lever toward you. The high-beam
indicator flashes to indicate to the other driver that
you intend to pass. If the low-beam headlamps
are off and the fog lamps are on, the fog
lamps flash.
162
While the high beams
are on, this light on
the instrument panel
cluster will also be lit.
Windshield Wipers
Use the lever located on the right side of the
steering column to operate the windshield wipers.
(High Speed): Move the lever to this
1
position for steady wiping at high speed.
(Low Speed): Move the lever to this
6
position for steady wiping at low speed.
(Delay): Move the lever to this position to
&
set a delay between wipes.