Chevrolet 2007 Corvette Owner's Manual page 251

SCAN: Scan the stations within a category by
performing the following:
1. Press the CAT button. The last selected
category displays.
O
2. Turn the /
e
3. Once the desired category is displayed, press
and hold either the left
arrow until a beep sounds and SCAN
CATEGORY displays. The radio begins
scanning the stations in the category.
4. Press either the left
to stop scanning.
If both category and TRAF (traffic) are on, the
radio scans for stations with the selected category
and traffic announcements.
BAND (AF Alternate Frequency): Alternate
frequency allows the radio to switch to a
stronger station in the same category. To turn
alternate frequency on, press and hold BAND for
four seconds. AF ON displays. The radio goes
to stations with a stronger frequency.
To turn alternate frequency off, press and hold
BAND again for four seconds. AF OFF displays.
The radio does not switch to other stations.
This function does not apply for XM™ Satellite
Radio Service.
knob to select the category.
t u
or right SCAN
t u
or right SCAN arrow
RDS Messages
ALERT!: Alert warns of local or national
emergencies. When an alert announcement
comes on the current radio station, ALERT!
displays. You will hear the announcement, even
if the volume is low or a CD is playing. If a CD is
playing, play stops during the announcement.
Alert announcements cannot be turned off.
ALERT! is not affected by tests of the emergency
broadcast system. This feature is not supported by
all RDS stations.
4
(Information): If the current station has a
message, INFO (information) displays. Press
4
the button to see the message. The message
can display the artist, song title, call in phone
numbers, etc.
If the entire message is not displayed, parts of
the message appears every three seconds.
To scroll through the message, press and
4
release the button.
251