Page 1 2007 Chevrolet TrailBlazer Owner Manual Seats and Restraint Systems ....... 7 Instrument Panel ........167 Front Seats ..........9 Instrument Panel Overview ....170 Rear Seats Climate Controls ..........18 ........187 Safety Belts Warning Lights, Gages, ..........20 and Indicators ........
Page 2 Four-Wheel Drive ........440 Maintenance Schedule ......515 Front Axle ..........440 Maintenance Schedule ......516 Bulb Replacement ........ 442 Customer Assistance Information ..... 537 Windshield Wiper Blade Replacement ..444 Customer Assistance and Information ..538 Tires ............. 448 Reporting Safety Defects ......
Page 3: Canadian Owners
For vehicles ﬁrst sold in Canada, substitute P.O. Box 07130 the name “General Motors of Canada Limited” Detroit, MI 48207 for Chevrolet Motor Division whenever it appears in this manual. Litho in U.S.A. © Part No. 15863673 B Second Printing...
Page 4: How To Use This Manual
How to Use This Manual CAUTION: Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle. If this is done, it can help you learn These mean there is something that could about the features and controls for the vehicle. hurt you or other people.
Page 5: Vehicle Symbols
Vehicle Damage Warnings Vehicle Symbols Also, in this manual you will ﬁnd these notices: The vehicle has components and labels that use symbols instead of text. Symbols are shown along Notice: These mean there is something with the text describing the operation or that could damage your vehicle.
Page 6 These are some examples of symbols that may be found on the vehicle:...
Page 7: Table Of Contents
Section 1 Seats and Restraint Systems Front Seats ............. 9 Right Front Passenger Position ....34 Manual Seats ..........9 Rear Seat Passengers ........ 34 Power Seats ..........10 Rear Safety Belt Comfort Guides ....37 Manual Lumbar ........... 10 Safety Belt Pretensioners ......
Page 8 Section 1 Seats and Restraint Systems Airbag System ..........69 Servicing Your Airbag-Equipped Vehicle ..86 Where Are the Airbags? ......72 Adding Equipment to Your When Should an Airbag Inﬂate? ....75 Airbag-Equipped Vehicle ......87 What Makes an Airbag Inﬂate? ....77 Restraint System Check .......
Page 9: Front Seats
Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
Page 10: Power Seats
Power Seats If the seats have power reclining seatbacks, the control used to operate them is located behind the If the vehicle has power power seat control on the outboard side of the seats, the controls used seats. See “Power Reclining Seatbacks” to operate them are under Reclining Seatbacks on page 14.
Page 11: Power Lumbar
Power Lumbar Heated Seats Your vehicle may have power lumbar on the Your vehicle may have driver’s and front passenger’s seats. heated front seats. The buttons used to The seatback lumbar control this feature are support can be adjusted located on the front by moving the control door armrests.
Page 12: Memory Seat, Mirrors, And Pedals
To heat only the seatback, press the vertical These buttons are used to program and recall button with the heated seatback symbol. An memory settings for the driver’s seating position, indicator light on the button will come on to both outside mirror positions, and the adjustable designate that only the seatback is being heated.
Page 13 Easy Exit Seat To recall the memory settings, do one of the following: The control for the easy exit seat function is • Press and release button 1 or 2 while the located on the driver’s door below the memory vehicle is in PARK (P).
Page 14: Reclining Seatbacks
Reclining Seatbacks To repeat the procedure for a second driver, follow the preceding steps, but press the other Manual Reclining Seatbacks numbered memory control button. To recall the easy exit seat position, do one of the following: CAUTION: • Press the easy exit seat button on the memory control while the vehicle is in You can lose control of the vehicle if you PARK (P).
Page 15 If the seats have manual reclining seatbacks, the To return the seatback to an upright position, do lever used to operate them is located on the the following: outboard side of the seat(s). 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position.
Page 16 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries.
Page 17: Head Restraints
Head Restraints Pull the head restraint up to raise it. To lower the head restraint, press the button, located on the top of the seatback, and push the head restraint down. Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head.
Page 18: Rear Seats
Rear Seats Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle Rear Seat Operation the safety belts and return them to their normal stowed position before folding a rear seat. Your vehicle has ﬂip and fold second row seats which provide additional cargo space.
Page 19 To return the seat(s) to the original position, do the following: CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.
Page 20: Safety Belts
Safety Belts CAUTION: Safety Belts: They Are for Everyone It is extremely dangerous to ride in a This part of the manual tells you how to use cargo area, inside or outside of a vehicle. safety belts properly. It also tells you some things In a collision, people riding in these areas you should not do with safety belts.
Page 21 Why Safety Belts Work In most states and in all Canadian provinces, the law says to wear safety belts. Here is why: When you ride in or on anything, you go as fast They work. as it goes. You never know if you will be in a crash. If you do have a crash, you do not know if it will be a bad one.
Page 22 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.
Page 23 The person keeps going until stopped by or the instrument panel... something. In a real vehicle, it could be the windshield...
Page 24: Questions And Answers About
Questions and Answers About Safety Belts Will I be trapped in the vehicle after an accident if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But you can unbuckle a safety belt, even if you are upside down.
Page 25: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly If I am a good driver, and I never drive far from home, why should I wear safety belts? This part is only for people of adult size. You may be an excellent driver, but if you are Be aware that there are special things to know in an accident —...
Page 26 If the belt is not long enough, see Safety Belt Extender on page 40. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 3.
Page 27 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 28 What is wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body. The shoulder belt is too loose. It will not give nearly as much protection this way.
Page 29 What is wrong with this? CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
Page 30 What is wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries.
Page 31 What is wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 32 What is wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to ﬁx it.
Page 33: Safety Belt Use During Pregnancy
To unlatch the belt, push the button on the buckle. A pregnant woman should wear a lap-shoulder The belt should go back out of the way. belt, and the lap portion should be worn as low as possible, below the rounding, throughout the Before you close the door, be sure the belt is out pregnancy.
Page 34: Right Front Passenger Position
Right Front Passenger Position Lap-Shoulder Belt All rear seat positions have lap-shoulder belts. To learn how to wear the right front passenger’s Here is how to wear one properly. safety belt properly, see Driver Position on page 25. The right front passenger’s safety belt works the same way as the driver’s safety belt —...
Page 35 2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. When the shoulder belt is pulled out all the way, it will lock. If it does, let it go back all the way and start again.
Page 36 This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there is a sudden stop or a crash.
Page 37: Rear Safety Belt Comfort Guides
Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
Page 38 2. Slide the guide under and past the belt. 3. Be sure that the belt is not twisted and it lies The elastic cord must be under the belt. ﬂat. The elastic cord must be under the belt Then, place the guide over the belt and insert and the guide on top.
Page 39 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Page 40: Safety Belt Pretensioners
Safety Belt Pretensioners Safety Belt Extender Your vehicle has safety belt pretensioners for the If the vehicle’s safety belt will fasten around you, driver and right front passenger. Although you you should use it. cannot see them, they are part of the safety belt But if a safety belt is not long enough, your assembly.
Page 41: Child Restraints
Child Restraints What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt Older Children and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should ﬁt snugly below the hips, just touching the top of the thighs.
Page 42 What if a child is wearing a lap-shoulder belt, but the child is so small that the CAUTION: shoulder belt is very close to the child’s face or neck? Never do this. If the child is sitting in a seat next to a Here two children are wearing the same window, move the child toward the center of belt.
Page 43 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
Page 44: Infants And Young Children
Infants and Young Children CAUTION: Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the Children can be seriously injured or traveler changes the need, for everyone, to use strangled if a shoulder belt is wrapped safety restraints.
Page 45 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force...
Page 46 CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 47 For most basic types of child restraints, there CAUTION: (Continued) are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, strongest part of an infant’s body, the back the restraint will have a label saying that it and shoulders.
Page 48: Child Restraint Systems
Child Restraint Systems A rear-facing infant seat (B) provides restraint with the seating surface against the back of the An infant car bed (A), a special bed made for use infant. The harness system holds the infant in in a motor vehicle, is an infant restraint system place and, in a crash, acts to keep the infant designed to restrain or position a child on a positioned in the restraint.
Page 49 A forward-facing child seat (C-E) provides restraint A booster seat (F-G) is a child restraint designed for the child’s body with the harness and also to improve the ﬁt of the vehicle’s safety belt sometimes with surfaces such as T-shaped system.
Page 50 Securing an Add-on Child Restraint in How Should I Use a Child Restraint? the Vehicle A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint CAUTION: system is a permanent part of the motor vehicle.
Page 51 When securing an add-on child restraint, refer to straps. A T-shaped shield has shoulder straps that the instructions that come with the restraint are attached to a ﬂat pad which rests low against which may be on the restraint itself or in a booklet, the child’s body.
Page 52: Where To Put The Restraint
Where to Put the Restraint CAUTION: Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. A child in a rear-facing child restraint can be seriously injured or killed if the right We recommend that children be secured in a rear front passenger’s airbag inﬂates.
Page 53: Lower Anchors And Tethers For Children (Latch)
Lower Anchors and Tethers for CAUTION: (Continued) Children (LATCH) The LATCH system holds a child restraint during If you need to secure a forward-facing driving or in a crash. This system is designed child restraint in the right front seat, to make installation of a child restraint easier.
Page 54 Lower Anchors When installing a child restraint with a top tether, you must also use either the lower anchors or the safety belts to properly secure the child restraint. A child restraint must never be installed using only the top tether and anchor. In order to use the LATCH system in your vehicle, you need a child restraint that has LATCH attachments.
Page 55 Top Tether Anchor Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints that have a top tether are designed for use with or without the top tether being attached.
Page 56 Lower Anchor and Top Tether Anchor To assist you in locating the lower anchors, each Locations seating position with lower anchors has (Top Tether Anchor): two labels, near Seating positions with the crease between the top tether anchors. seatback and the seat cushion.
Page 57 Do not use the rear tie-down brackets near the liftgate for attaching top tethers. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed. Do not secure a child restraint in the right front passenger’s position, if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint...
Page 58 Securing a Child Restraint Designed for the LATCH System CAUTION: Each top tether anchor and lower anchor CAUTION: in the vehicle is designed to hold only one child restraint. Attaching more than If a LATCH-type child restraint is not one child restraint to a single anchor attached to anchors, the restraint will not could cause the anchor or attachment to be able to protect the child correctly.
Page 59 Folding an empty rear seat with the safety belts secured may cause damage to the safety CAUTION: belt or the seat. When removing the child restraint, always remember to return the safety Children can be seriously injured or belts to their normal, stowed position before strangled if a shoulder belt is wrapped folding the rear seat.
Page 60 1.3. Put the child restraint on the seat. If the position you are using does not have a 1.4. Attach and tighten the lower head restraint and attachments on the child restraint to the you are using a single lower anchors. tether, route the 2.
Page 61: Securing A Child Restraint In A Rear Outside Seat Position
Securing a Child Restraint in a Rear For vehicles that have a head restraint, fold Outside Seat Position down the head restraint and route the single If your child restraint has the LATCH system, see tether under the Lower Anchors and Tethers for Children head restraint and in (LATCH) on page 53.
Page 62 3. Buckle the belt. Make sure the release button 4. Pull the rest of the shoulder belt all the way is positioned so you would be able to unbuckle out of the retractor to set the lock. the safety belt quickly if you ever had to.
Page 63 6. If your child restraint manufacturer recommends using a top tether, attach and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors and Tethers for Children (LATCH) on page 53. 7.
Page 64: Securing A Child Restraint In The Center Rear Seat Position
Securing a Child Restraint in the Securing a Child Restraint in the Center Rear Seat Position Right Front Seat Position Many child restraints are too wide to be correctly Your vehicle has a right front passenger’s airbag. secured in the center rear seat, although some A rear seat is a safer place to secure a of them will ﬁt there.
Page 65 CAUTION: (Continued) CAUTION: If you need to secure a forward-facing A child in a rear-facing child restraint can child restraint in the right front seat, be seriously injured or killed if the right always move the front passenger seat as front passenger’s airbag inﬂates.
Page 66 There is no top tether anchor at the right front If your child restraint is forward-facing, move seating position. Do not secure a child seat in this the seat as far back as it will go before position if a national or local law requires that securing the child restraint in this seat.
Page 67 4. Buckle the belt. Make sure the release button 5. Pull the rest of the shoulder belt all the way is positioned so you would be able to unbuckle out of the retractor to set the lock. the safety belt quickly if you ever had to.
Page 68 7. Push and pull the child restraint in different directions to be sure it is secure. 8. If the airbag is off, the off indicator will come on and stay on when the key is turned to RUN or START. If a child restraint has been installed and the on indicator is lit, turn the vehicle off.
Page 69: Airbag System
Airbag System CAUTION: Your vehicle has a frontal airbag for the driver and a frontal airbag for the right front passenger. Be sure that cargo is not near an airbag. Your vehicle may also have roof-mounted side impact airbags designed for either side impact or In a crash, an inﬂating airbag might force rollover deployment.
Page 70 Here are the most important things to know about the airbag system: CAUTION: (Continued) rollover, rear crashes, or in many side CAUTION: crashes. And, for some unrestrained occupants, frontal airbags may provide You can be severely injured or killed in a less protection in frontal crashes than crash if you are not wearing your safety more forceful airbags have provided in...
Page 71 CAUTION: CAUTION: Both frontal and roof-mounted side impact Anyone who is up against, or very close airbags inﬂate with great force, faster than to, any airbag when it inﬂates can be the blink of an eye. If you are too close to seriously injured or killed.
Page 72: Where Are The Airbags
Where Are the Airbags? There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 202 for more information.
Page 73 The right front passenger’s frontal airbag is in the If your vehicle has a roof-mounted airbag for the instrument panel on the passenger’s side. driver and the person seated directly behind the driver, it is located in the ceiling above the side windows.
Page 74 CAUTION: If something is between an occupant and an airbag, the bag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any...
Page 75: When Should An Airbag Inﬂate
When Should an Airbag Inﬂate? If the front of your vehicle goes straight into a wall that does not move or deform, the threshold The driver’s and right front passenger’s frontal level for the reduced deployment is about 9 to airbags are designed to inﬂate in moderate to 16 mph (14 to 26 km/h), and the threshold level for severe frontal or near-frontal crashes.
Page 76 Frontal airbags (driver and right front passenger) In any particular crash, no one can say whether an are not intended to inﬂate during vehicle airbag should have inﬂated simply because of the rollovers, rear impacts, or in many side impacts. damage to a vehicle or because of what the repair costs were.
Page 77: What Makes An Airbag Inﬂate
What Makes an Airbag Inﬂate? How Does an Airbag Restrain? In an impact of sufficient severity, the airbag In moderate to severe frontal or near frontal sensing system detects that the vehicle is collisions, even belted occupants can contact the in a crash.
Page 78: What Will You See After An Airbag Inﬂates
What Will You See After an CAUTION: Airbag Inﬂates? After a frontal airbag inﬂates, it quickly deﬂates, so When an airbag inﬂates, there may be quickly that some people may not even realize dust in the air. This dust could cause an airbag inﬂated.
Page 79 • Your vehicle has a feature that may automatically Your vehicle has a crash sensing and unlock the doors, turn the interior lamps on, and diagnostic module which records information ﬂash the hazard warning ﬂashers when the airbags after a crash. See Vehicle Data Recording and inﬂate.
Page 80: Passenger Sensing System
Passenger Sensing System The words ON and OFF, or the symbol for on and off, will be visible during the system check. Your vehicle has a passenger sensing system for When the system check is complete, either the the right front passenger’s position. A passenger word ON or the word OFF, or the symbol for on or airbag status indicator in the rearview mirror will be the symbol for off, will be visible.
Page 81 If your vehicle has a rear seat that will accommodate a rear-facing child restraint, a label CAUTION: (Continued) on your sun visor says, “Never put a rear-facing child seat in the front.” This is because the risk to Even though the passenger sensing the rear-facing child is so great, if the airbag system is designed to turn off the deploys.
Page 82 If your vehicle does not have a rear seat that will accommodate a rear-facing child restraint, CAUTION: (Continued) never put a child in a rear-facing child restraint in the right front passenger seat unless the Even though the passenger sensing passenger airbag status indicator shows off and system is designed to turn off the the airbag is off.
Page 83 The passenger sensing system is designed to turn If a child restraint has been installed and the on off the right front passenger’s frontal airbag if: indicator is lit, turn the vehicle off. Remove the child restraint from the vehicle and reinstall the •...
Page 84 The passenger sensing system is designed to Restart the vehicle and have the person remain in enable (may inﬂate) the right front passenger’s this position for about two minutes. This will frontal airbag anytime the system senses allow the system to detect that person and then that a person of adult size is sitting properly in the enable the passenger’s airbag.
Page 85 Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system CAUTION: operates. You may want to consider not using seat covers or other aftermarket equipment if your If the airbag readiness light in the vehicle has the passenger sensing system. See instrument panel cluster ever comes on Adding Equipment to Your Airbag-Equipped Vehicle on page 87 for more information about...
Page 86: Servicing Your Airbag-Equipped Vehicle
Servicing Your Airbag-Equipped CAUTION: Vehicle Airbags affect how your vehicle should be For up to 10 seconds, after the ignition is serviced. There are parts of the airbag system in turned off and the battery is disconnected, several places around your vehicle. You do an airbag can still inﬂate during improper not want the system to inﬂate while someone is service.
Page 87: Adding Equipment To Your
Adding Equipment to Your Because I have a disability, I have to get my vehicle modiﬁed. How can I ﬁnd out Airbag-Equipped Vehicle whether this will affect my airbag system? Is there anything I might add to the front Changing or moving any parts of the or sides of the vehicle that could keep the front seats, safety belts, the airbag sensing airbags from working properly?
Page 88: Restraint System Check
Restraint System Check Also look for any opened or broken airbag covers, and have them repaired or replaced. The airbag system does not need regular maintenance. Checking the Restraint Systems Notice: If you damage the covering for the Now and then, make sure the safety belt reminder driver’s or the right front passenger’s airbag, light and all your belts, buckles, latch plates, or the side impact airbag covering on the...
Page 89: Replacing Restraint System Parts
Replacing Restraint System Parts If belts are cut or damaged, replace them. Collision damage also may mean you will need to After a Crash have LATCH system, safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt or LATCH system CAUTION: was not being used at the time of the collision.
Page 90 ✍ NOTES...
Page 91: Features And Controls
Section 2 Features and Controls Keys .............. 93 Starting and Operating Your Vehicle ..111 Remote Keyless Entry (RKE) System ..95 New Vehicle Break-In ........ 111 Remote Keyless Entry (RKE) System Ignition Positions ........112 Operation ..........96 Retained Accessory Power (RAP) ..... 113 Starting the Engine ........
Page 92 Section 2 Features and Controls Mirrors ............132 Universal Home Remote System ....149 Manual Rearview Mirror ......132 System Identiﬁcation ........149 ® Manual Rearview Mirror with OnStar ..132 Universal Home Remote System ....150 Automatic Dimming Rearview Mirror with Universal Home Remote System Operation ®...
Page 93: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a closing...
Page 94 This vehicle has keys The key code number tells your dealer or a that can be used for the qualiﬁed locksmith how to make extra keys. Keep ignition and door lock this number in a safe place. If you lose your that will ﬁt with keys, you will be able to have new ones made either side up.
Page 95: Remote Keyless Entry (Rke) System
Remote Keyless Entry (RKE) Changes or modiﬁcations to this system by other than an authorized service facility could void System authorization to use this equipment. If the vehicle has the Remote Keyless Entry (RKE) At times you may notice a decrease in range. This system, it operates on a radio frequency subject is normal for any RKE system.
Page 96 Remote Keyless Entry (RKE) (Lock): Press lock to lock all the doors. Press lock again within three seconds and the System Operation horn will chirp. If your vehicle has this feature, you can lock and (Panic): Press the horn symbol to make the unlock your doors from about 3 feet (1 m) up horn sound.
Page 97 Battery Replacement To replace the battery in the RKE transmitter do the following: Under normal use, the battery in your RKE transmitter should last about two years. the battery is weak if the transmitter does not work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it is probably time to change the battery.
Page 98: Doors And Locks
Doors and Locks CAUTION: (Continued) Door Locks • Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme CAUTION: heat and can suffer permanent injuries or even death from heat stroke. Always lock your vehicle whenever Unlocked doors can be dangerous.
Page 99: Power Door Locks
Power Door Locks You can lock or unlock the door from the inside by sliding the manual The power door lock lever forward or switches are located on rearward. the driver’s and front passenger’s door armrests. When the door is unlocked, you can see a red area on the lever.
Page 100: Delayed Locking
Delayed Locking Programming Delayed Locking To turn the delayed locking feature on or off, do This feature delays the locking of the doors and the following: the liftgate when using the power lock or the remote keyless entry system. 1. Press and hold the power door lock switch on the driver’s door in the lock position.
Page 101 Programmable Locking Feature 3. You are now ready to program the automatic door locks. Select one of the two programming Following are the two locking modes that can be options listed previously, and press the lock programmed: side of the power door lock switch to cycle through the lock options.
Page 102 Programmable Unlocking Feature 2. Turn the key to RUN and LOCK twice. Then, with the key in LOCK, release the The following is the list of available programming turn signal/multifunction lever. Once you do options: this, you will hear the lock switch lock and unlock, the horn will chirp twice, and a Mode 1: Driver’s door unlocks when the 30-second program timer will begin.
Page 103: Rear Door Security Locks
Rear Door Security Locks The rear doors of your vehicle cannot be opened from the inside while this feature is in use. Your vehicle may have this feature. You can lock If you want to open the rear door while the security the rear doors so they cannot be opened from lock is on, unlock the door and open the door the inside by passengers.
Page 104: Liftgate/Liftglass
Liftgate/Liftglass Liftgate Release To unlock the liftgate, use the power door lock switch or the remote keyless entry transmitter. See CAUTION: Remote Keyless Entry (RKE) System Operation on page 96. The liftglass will also unlock when the It can be dangerous to drive with the liftgate is unlocked.
Page 105: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 106: Power Windows
Power Windows CAUTION: (Continued) CAUTION: even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or Leaving children, helpless adults, or pets in a vehicle with the windows closed is killed if caught in the path of a closing window.
Page 107 Press down the top of the switch to lower the window and pull up on the switch to raise the window. If you hold the switch down for three to seven seconds after the window has been completely lowered or raised, the window will not operate for about 15 seconds.
Page 108: Sun Visors
Sun Visors Lighted Visor Vanity Mirror Your vehicle may have this feature. Pull the sun Sun Visors with Slide Rod visor down and lift the mirror cover to turn on Your vehicle may have this feature. Pull the sun the lamps. The lamps will turn off when the cover visor down to block glare.
Page 109 To operate the system, do the following: To avoid setting off the alarm by accident, do the following: 1. Open the door. • Always lock the vehicle using the door key 2. Lock the door with the power door lock switch after the doors are closed.
Page 110: Passlock
When the alarm is set the power door unlock If the engine stalls and the security light ﬂashes, switch will not work. wait about 10 minutes until the light stops ﬂashing before trying to restart the engine. If the alarm does not sound when it should but the Remember to release the key from START as headlamps ﬂash, check to see if the horn works.
Page 111: Starting And Operating Your Vehicle
Starting and Operating Your • Avoid making hard stops for the ﬁrst 200 miles (322 km) or so. During this time Vehicle the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier New Vehicle Break-In replacement.
Page 112: Ignition Positions
Ignition Positions Notice: If your key seems stuck in LOCK and you cannot turn it, be sure you are using the correct key; if so, is it all the way in? Turn the key only with your hand. Using a tool to force it could break the key or the ignition switch.
Page 113: Retained Accessory Power (Rap)
Key In the Ignition These features will work when the key is in RUN or ACCESSORY. Once the key is turned from Never leave your vehicle with the keys inside, as it RUN to LOCK, these features continue to work for is an easy target for joy riders or thieves.
Page 114 Starting Procedure Notice: Cranking the engine for long periods of time, by returning the key to the START position 1. With your foot off the accelerator pedal, turn immediately after cranking has ended, can the ignition key to START. When the engine overheat and damage the cranking motor, and starts, let go of the key.
Page 115: Adjustable Throttle And Brake Pedal
Notice: Your engine is designed to work with The vehicle must be in PARK (P) for this feature the electronics in your vehicle. If you add to operate. electrical parts or accessories, you could The switch used to change the way the engine operates. Before adjust the pedals is adding electrical equipment, check with your located on the steering...
Page 116: Engine Coolant Heater
Engine Coolant Heater To Use the Engine Coolant Heater 1. Turn off the engine. Your vehicle may have an engine coolant heater. 2. Open the hood and unwrap the electrical In very cold weather, 0°F (−18°C) or colder, cord. The cord is located on the driver’s the engine coolant heater can help.
Page 117: Active Fuel Management
4. Before starting the engine, be sure to unplug When less power is required, such as cruising at a and store the cord as it was before to keep it constant vehicle speed, the system will operate away from moving engine parts. If you do not, in the half cylinder mode, allowing your vehicle to it could be damaged.
Page 118 PARK (P): This position locks the rear wheels. It is the best position to use when you start CAUTION: the engine because your vehicle cannot move easily. If you have four-wheel drive, your vehicle will be free to roll — even if your shift CAUTION: lever is in PARK (P) —...
Page 119 REVERSE (R): Use this gear to back up. CAUTION: Notice: Shifting to REVERSE (R) while your vehicle is moving forward could damage the transmission. The repairs would not be Shifting into a drive gear while your covered by your warranty. Shift to engine is running at high speed is REVERSE (R) only after your vehicle is dangerous.
Page 120 DRIVE (D): This position is for normal driving. To shift to the THIRD (3) position, you must ﬁrst It provides the best fuel economy for your vehicle. press the large button on the shift handle. If you need more power for passing, and you are: While the button is pressed, move the shifter in the THIRD (3) position.
Page 121: Four-Wheel Drive
To shift to the FIRST (1) position, you must ﬁrst Notice: Driving on clean, dry pavement in press the large button on the shift handle. Four-Wheel-Drive High or Four-Wheel-Drive While the button is pressed, move the shifter in Low for an extended period of time may cause the FIRST (1) position.
Page 122 Automatic Transfer Case AUTO (Automatic Four-Wheel Drive): This setting is ideal for use when road conditions are If your vehicle has four-wheel drive, the transfer variable. When driving your vehicle in automatic case knob is located to the right of the steering four-wheel drive, the front axle is engaged, but the wheel on the instrument panel.
Page 123 the transfer case. It will stay on when the shift is complete. If for some reason the transfer case CAUTION: cannot make a requested shift, it will return to the last chosen setting. Shifting the transfer case to NEUTRAL can If the service Four-Wheel Drive Warning Light on cause your vehicle to roll even if the the instrument panel cluster stays on, you...
Page 124 Shifting Into Four-Wheel Low Shifting Out of Four-Wheel Low To shift to Four-Wheel Low, the vehicle’s engine To shift from Four-Wheel Low to Four-Wheel High, must be running and the vehicle must be stopped Auto Four-Wheel Drive, or Two-Wheel High, or moving less than 2 mph (3.2 km/h) with the your vehicle must be stopped or moving less than transmission in NEUTRAL (N).
Page 125 Shifting into NEUTRAL Shifting Out of NEUTRAL Before shifting the transfer case to NEUTRAL, To shift the transfer case out of NEUTRAL, do the ﬁrst make sure the vehicle is parked so that it will following: not roll. 1. Set the parking brake and apply the regular brake pedal.
Page 126: Parking Brake
Parking Brake To release the parking brake, hold the regular brake pedal down. Pull the parking brake lever up To set the parking brake, hold the regular brake until you can press in the button at the end of pedal down with your foot and pull up on the the lever.
Page 127: Shifting Into Park (P)
Shifting Into Park (P) To shift into PARK (P): 1. Hold the brake pedal down with your foot and set the parking brake. CAUTION: 2. Move the shift lever into PARK (P) by pressing the button on the side of the shift lever and It can be dangerous to get out of your pushing the lever all the way toward the front vehicle if the shift lever is not fully in...
Page 128 Leaving Your Vehicle With the Engine If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) Running and your parking brake is ﬁrmly set before you leave it. After you have moved the shift lever into PARK (P), hold the regular brake pedal down.
Page 129: Shifting Out Of Park (P)
Parking Over Things That Burn When you are ready to drive, move the shift lever out of PARK (P) before you release the parking brake. If torque lock does occur, you may need to have another vehicle push yours a little uphill to take some of the pressure from the parking pawl in the transmission, so you can pull the shift lever out of PARK (P).
Page 130: Engine Exhaust
Engine Exhaust CAUTION: (Continued) • CAUTION: Your vehicle was damaged when driving over high points on the road or over road debris. Engine exhaust can kill. It contains the • Repairs were not done correctly. gas carbon monoxide (CO), which you •...
Page 131: Running The Engine While Parked
Running the Engine While Parked CAUTION: It is better not to park with the engine running. But if you ever have to, here are some things to know. It can be dangerous to get out of your vehicle if the shift lever is not fully in CAUTION: PARK (P) with the parking brake ﬁrmly set.
Page 132: Mirrors
Mirrors CAUTION: Manual Rearview Mirror If your vehicle has four-wheel drive, it will Your vehicle may have this feature. While sitting in be free to roll — even if the shift lever is a comfortable driving position, adjust the rearview in PARK (P) —...
Page 133: Automatic Dimming Rearview Mirror With Onstar And Compass
Mirror Operation Automatic Dimming Mirror Operation While sitting in a comfortable driving position, The automatic dimming mirror function is turned on adjust the rearview mirror so you can see clearly automatically each time the ignition is started. behind your vehicle. Grip it in the center to To operate the automatic dimming mirror, do the move it up or down and side to side.
Page 134 Compass Calibration for compass variance. If not adjusted to account for compass variance, your compass could Press and hold the on/off button to activate the give false readings. compass calibration mode. CAL will be displayed in To adjust for compass variance, do the following: the compass window on the mirror.
Page 135: Automatic Dimming Rearview Mirror With Onstar , Compass And Temperature Display
Automatic Dimming Mirror Operation 3. Scroll through the zone numbers that appear in the window on the mirror by pressing the on/off The automatic dimming mirror function is turned on button. Once you ﬁnd your zone number, automatically each time the ignition is started. release the button.
Page 136 If the display reads CAL, you will need to calibrate Compass variance is the difference between earth’s the compass. For more information on calibration, magnetic north and true geographic north. If not see below. adjusted to account for compass variance, your compass could give false readings.
Page 137 3. Keep pressing the on/off button until the In order to calibrate, CAL must be displayed in the desired zone number appears in the display. mirror compass windows. If CAL is not displayed, Release the button. After approximately press and hold the on/off button until CAL is four seconds of inactivity, the new zone displayed.
Page 138: Automatic Dimming Rearview Mirror With Compass
Automatic Dimming Rearview Mirror Compass Operation with Compass Press the on/off button once to turn the compass on or off. Your vehicle may have an automatic-dimming There is a compass display in the window in the rearview mirror with a compass. upper right corner of the mirror face.
Page 139: Compass Variance
Compass Variance Compass variance is the difference between earth’s magnetic north and true geographic north. The mirror is set to zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if you live outside zone eight.
Page 140: Automatic Dimming Rearview Mirror With Compass And Temperature Display
Automatic Dimming Rearview Mirror Automatic Dimming Mirror Operation with Compass and Temperature The automatic dimming mirror function is turned on automatically each time the ignition is started. Display To operate the automatic dimming mirror, do the following: If the vehicle is equipped with an automatic mirror, it will, when on, automatically dim to the proper 1.
Page 141 Temperature Display Compass Operation The temperature can be displayed by pressing the Press the COMP button once brieﬂy to turn the TEMP button. Pressing the TEMP button once compass on or off. brieﬂy, will toggle the temperature reading on When the ignition and the compass feature are and off.
Page 142 In order to calibrate, CAL must be displayed in the mirror compass windows. If CAL is not displayed, press and hold the COMP button until CAL is displayed. The compass can be calibrated by driving the vehicle in circles at 5 mph (8 km/h) or less until the display reads a direction.
Page 143: Outside Manual Mirrors
Passenger Airbag Indicator Outside Power Mirrors The mirror may be equipped with a passenger Your vehicle may have this feature. The power airbag indicator on the mirror glass, just above the mirror control is located on the driver’s door. buttons. If the vehicle has this feature the mirror Turn the control knob left or right to select the will display the word ON, or an airbag symbol desired mirror.
Page 144: Outside Curb View Assist Mirror
Outside Curb View Assist Mirror Outside Convex Mirror If the vehicle has this feature, the passenger’s outside mirror will adjust to a preset tilt position CAUTION: while the vehicle is in REVERSE (R) gear. Curb view assist may be useful when you are A convex mirror can make things (like parallel parking.
Page 145: Outside Heated Mirrors
Outside Heated Mirrors services be sent to your location. If you lock ® your keys in the vehicle, call OnStar If the vehicle has this feature, when the rear 1-888-4-ONSTAR and they can send a signal to window defogger is turned on, the outside driver’s unlock your doors.
Page 146 ® OnStar Services • AccidentAssist • Remote Door Unlock/Vehicle Alert ® For new vehicles with OnStar , the Safe & Sound ® ® Plan, or the Directions & Connections Plan is • OnStar Vehicle Diagnostics included for one year from the date of purchase. ®...
Page 147 ® ® OnStar Hands-Free Calling OnStar Steering Wheel Controls ® OnStar Hands-Free Calling allows eligible Your vehicle may have a Talk/Mute button that ® ® OnStar subscribers to make and receive calls can be used to interact with OnStar Hands-Free using voice commands.
Page 148: How Onstar Service Works
® ® How OnStar Service Works OnStar service. Not all services are available everywhere, particularly in remote or enclosed ® In order to provide you with OnStar services, your areas, or at all times. ® vehicle’s OnStar system has the capability of ®...
Page 149: Universal Home Remote System
Universal Home Remote System System Identiﬁcation Your vehicle may have a Universal Home Remote System. Determine which Universal Home Remote your If there are three round LED indicator lights above vehicle has and then read the pages following for the Universal Home Remote buttons, follow the instructions on programming your speciﬁc system.
Page 150: Universal Home Remote System
Universal Home Remote System Universal Home Remote System Operation (With One Triangular LED) The Universal Home Remote System provides a way to replace up to three hand-held Radio-Frequency (RF) transmitters used to activate devices such as garage door openers, security systems, and home lighting. This device complies with Part 15 of the FCC Rules.
Page 151 Programming the Universal Home Read the instructions completely before attempting to program the Universal Home Remote. Remote System Because of the steps involved, it may be helpful Follow these steps to program up to three devices: to have another person available to assist you 1.
Page 152 4. The indicator light will ﬂash slowly at ﬁrst and 6. Locate in the garage, the garage door opener then rapidly after Universal Home Remote receiver (motor-head unit). Locate the “Learn” successfully receives the frequency signal or “Smart” button. This can usually be from the hand-held transmitter.
Page 153 Gate Operator and Canadian Using Universal Home Remote Programming Press and hold the appropriate Universal Home Remote button for at least half of a second. Canadian radio-frequency laws require transmitter The indicator light will come on while the signal signals to time out or quit after several seconds is being transmitted.
Page 154: Universal Home Remote System Operation (With Three Round Led)
Reprogramming a Single Universal Universal Home Remote System Home Remote Button Operation (With Three Round LED) To program a device to Universal Home Remote using a Universal Home Remote button previously trained, follow these steps: 1. Press and hold the desired Universal Home Remote button.
Page 155 Programming Universal Home Read the instructions completely before attempting to program the transmitter. Because of the steps Remote — Rolling Code involved, it may be helpful to have another person Most garage door openers sold after 1996 are available to assist you in programming the Rolling Code units.
Page 156 3. Immediately return to your vehicle. Press and hold the universal home remote button that you would like to use to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. You may need to hold the button from ﬁve to 20 seconds.
Page 157 If these instructions do not work, you probably Follow these steps to program up to three devices: have a Fixed Code garage door opener. Follow the Programming instructions below for a Fixed Code garage door opener. Programming Universal Home Remote — Fixed Code Most garage door openers sold before 1996 are Fixed Code units.
Page 158 Example of Eight Dip Switches with Two Positions Example of Eight Dip Switches with Three Positions Your panel of switches may not appear exactly as they do in the examples above, but they should be similar. The switch positions on your hand-held transmitter may be labeled, as follows: •...
Page 159 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
Page 160 Reprogramming Universal Home 5. After entering all of the switch positions, again, ﬁrmly press and release all three Remote Buttons buttons at the same time. The indicator lights You can reprogram any of the three buttons by will turn on. repeating the instructions.
Page 161: Storage Areas
Storage Areas Center Console Storage Area Squeeze the front lever on the center console Glove Box while lifting the top to open it. Your vehicle’s console will have cupholders To open, pull up on the handle. Use the key to located on the front and rear of the storage lock and unlock.
Page 162: Luggage Carrier
Luggage Carrier If your vehicle has a luggage carrier, it will allow you to load things on top of your vehicle. The luggage carrier has side rails attached to the roof, places to use for tying things down and may CAUTION: have sliding crossrails.
Page 163: Rear Floor Storage Lid
To prevent damage or loss of cargo as you are To remove the rear ﬂoor storage lid, do the driving, check now and then to make sure following: the luggage carrier is locked and cargo is still 1. Press the latch release and lift up the latch securely fastened.
Page 164: Convenience Net
Convenience Net Cargo Cover Your vehicle may have this feature. A convenience If your vehicle has a cargo cover, you can use it net in the rear of your vehicle helps keep small to cover items in the cargo area of your vehicle. items in place during sharp turns or quick To install the cargo cover, do the following: stops and starts.
Page 165: Cargo Tie Downs
Cargo Tie Downs To remove the cargo cover, do the following: 1. Release the cover from the latch posts and There are cargo tie carefully roll it back up. downs in the rear of 2. Squeeze one endcap and remove it from the your vehicle that allow pocket in the trim panel.
Page 166: Sunroof
Sunroof Once the sunroof is closed, press the forward side of the control to open the sunroof to the vent The vehicle may have a power sliding sunroof. position. To open or close the sunroof, the ignition must be The sunroof has a sunshade which can be pulled turned to RUN, ACCESSORY, or Retained forward to block sun rays.
Page 167 Section 3 Instrument Panel Instrument Panel Overview ......170 Electric Power Management ...... 185 Hazard Warning Flashers ......172 Battery Run-Down Protection ..... 186 Other Warning Devices ......172 Accessory Power Outlet(s) ......186 Horn ............172 Ashtray(s) and Cigarette Lighter ....187 Tilt Wheel ..........
Page 168 Section 3 Instrument Panel ® StabiliTrak Indicator Light ......210 Audio System(s) ......... 238 Engine Coolant Temperature Gage .... 211 Setting the Time ........239 Tire Pressure Light ........211 Radio with CD (Base) ....... 240 Malfunction Indicator Lamp ......212 Radio with CD (MP3) ........
Page 169 ✍ NOTES...
Page 170: Instrument Panel Overview
Instrument Panel Overview...
Page 171 The main components of your instrument panel are the following: A. Exterior Lamp Control. See Headlamps H. Audio System. See Audio System(s) on page 180. Dome Lamp Override Button. on page 238. See Dome Lamp Override on page 184. I. Climate Controls. See Dual Climate Instrument Panel Brightness Control.
Page 172: Hazard Warning Flashers
Hazard Warning Flashers Press the button to make the front and rear turn signal lamps ﬂash on and off. Press the button The hazard warning ﬂashers warn others. again to turn the ﬂashers off. They also let police know you have a problem. When the hazard warning ﬂashers are on, your Your front and rear turn signal lamps will turn signals will not work.
Page 173: Tilt Wheel
Tilt Wheel Turn Signal/Multifunction Lever The steering wheel should be adjusted before you drive. The tilt lever is located to the left of the steering column, under the turn signal lever. The lever on the left side of the steering column includes the following: •...
Page 174: Turn And Lane-Change Signals
Turn and Lane-Change Signals As you signal a turn or a lane change, if the arrows ﬂash more quickly than normal, a signal The turn signal has two upward (for right) and bulb could be burned out and other drivers will not two downward (for left) positions.
Page 175: Headlamp High/Low-Beam Changer
Headlamp High/Low-Beam Changer If the headlamps are in the automatic position or on low beam, the high-beam headlamps turn on. To change the headlamps from low to high They will stay on as long as you hold the lever beam, push the lever toward the instrument panel. toward you.
Page 176: Windshield Washer
Rear Window Wiper/Washer For steady wiping at low speed, turn the band away from you to the ﬁrst solid band past the delay settings. For high-speed wiping, turn CAUTION: the band further, to the second solid band past the delay settings. To stop the wipers, move the band to off.
Page 177: Cruise Control
Cruise Control To turn the rear wiper on, turn the control to either 1, 2, or 3. For delayed wiping, turn the Your vehicle has control to 1 or 2. For steady wiping, turn the cruise control. The control to 3. To turn the wiper off, turn the controls are located control to 0.
Page 178 With cruise control, you can maintain a speed of about 25 mph (40 km/h) or more without CAUTION: keeping your foot on the accelerator. This can really help on long trips. Cruise control does not If you leave your cruise control on when work at speeds below about 25 mph (40 km/h).
Page 179 Increasing Speed While Using Some vehicles have a cruise light on the Cruise Control instrument panel There are two ways to go to a higher speed: cluster that will come • Use the accelerator pedal to get to the higher on when the cruise speed.
Page 180: Headlamps
Using Cruise Control on Hills Headlamps How well your cruise control works on hills The exterior lamps depends upon your speed, load and the steepness knob is located on of the hills. When going up steep hills, you may your instrument panel want to step on the accelerator pedal to maintain to the left of the your speed.
Page 181: Headlamps On Reminder
Daytime Running Lamps (DRL) (Parking Lamps): Turn the knob to this symbol to turn on the parking lamps, as well Daytime Running Lamps (DRL) can make it easier as the following: for others to see the front of your vehicle during •...
Page 182: Automatic Headlamp System
Automatic Headlamp System The DRL and automatic headlamp system are only affected when the light sensor sees a change in When it is dark enough outside, the Automatic lighting lasting longer than the delay. Headlamp System turns on the headlamps when If you start your vehicle in a dark garage, the the vehicle is started and after the transaxle automatic headlamp system comes on after the...
Page 183: Fog Lamps
Fog Lamps Instrument Panel Brightness Your vehicle may have this feature. Use your fog Press the knob located lamps for better vision in foggy or misty conditions. next to the exterior Your ignition must be in RUN for your fog lamps lamps knob to extend it.
Page 184: Dome Lamp Override
Dome Lamp Override Entry Lighting The vehicle has entry lighting. The dome override button is located When any door is opened, the dome lamps come below the exterior on as long as the dome override lamp override lamps knob. button is not pressed in. When all the doors are closed, the lamps stay on for a short period of time and then turn off automatically.
Page 185: Electric Power Management
Electric Power Management A high electrical load occurs when several of the following loads are on: headlamps, high beams, The vehicle has Electric Power Management fog lamps, rear window defogger, climate (EPM) that estimates the battery’s temperature and control fan at high speed, heated seats, engine state of charge.
Page 186: Battery Run-Down Protection
Battery Run-Down Protection Remove the cover from the outlet to use the outlet. Be sure to put the cover back on when This feature shuts off the dome, courtesy, and not using the accessory power outlet. vanity lamps if they are left on for more than Certain electrical accessories may not be 20 minutes when the ignition is off.
Page 187: Ashtray(S) And Cigarette Lighter
Ashtray(s) and Cigarette Lighter Climate Controls Your vehicle may have this feature. The ashtray Dual Climate Control System is removable and ﬁts into the front cupholder. Notice: If you put papers, pins, or other With this system you can control the heating, ﬂammable items in the ashtray, hot cigarettes cooling, and ventilation for your vehicle.
Page 188 To change the current mode, select one of the the windows may fog when the weather is cold and following: damp. To clear the fog, select either the defog or defrost mode and increase fan speed. (Vent): This mode directs air to the instrument Defog and defrost modes are described later in this panel outlets.
Page 189 the air inside of the vehicle. You may notice a The air conditioning compressor may run to slight change in engine performance when the dehumidify the air to prevent window fogging. air conditioning compressor shuts off and turns The recirculation button cannot be selected while on again.
Page 190: Dual Automatic Climate Control System
Dual Automatic Climate Control (Mode): Press this button to manually select the air delivery mode to the ﬂoor, instrument panel, System or windshield outlets. The system will stay in the selected mode until the mode button is pressed again or the AUTO button is pressed. Driver’s Side Temperature Knob: Turn this knob clockwise or counterclockwise to raise or lower the temperature on the driver’s side of the vehicle.
Page 191 The passenger’s side temperature setting also Use the steps below to place the entire system resets and relinks to the driver’s side temperature in automatic mode: setting if the vehicle has been off for more 1. Press the AUTO button. than three hours.
Page 192 Manual Operation (Floor): This mode directs most of the air to the ﬂoor outlets. Some air also comes out To change the current setting, select one of the of the defroster and side window outlets. following: The recirculation button cannot be selected in (Fan): This button allows you to manually ﬂoor mode.
Page 193 You may also notice that the air conditioning If you turn the air conditioning off while in front compressor will run while in recirculation mode. defrost or defog mode, the air conditioning symbol This is normal and will help to prevent fogging. will turn off, however, the A/C compressor will remain on to help de-humidify the air inside If the weather is cold and damp, the system may...
Page 194 Defogging and Defrosting Rear Window Defogger Fog on the inside of the windows is a result of If your vehicle has the rear window defogger a moisture condensing on the cool window glass. warming grid is used to remove fog from the This can be reduced if the climate control system rear window.
Page 195: Outlet Adjustment
Outlet Adjustment • Keep the air path under the front seats clear of objects. This helps air to circulate Use the air outlets located in the center and throughout your vehicle. on the side of the instrument panel to direct •...
Page 196: Rear Climate Control System
Rear Climate Control System PWR (Power): Press this button to turn the rear climate controls on or off. Your vehicle has one of the following rear climate (Panel): When panel mode is selected, control systems. With either of these systems, the the rear system will distribute air from the rear climate controls will be disabled when the front four headliner outlets.
Page 197 (On/Off): Press this button to turn the rear climate controls on or off. (Fan): Press this button to adjust the fan speed. (Mode): Press this button to change the direction of airﬂow (panel, bi-level or ﬂoor) to the rear seat area. The rear control will only turn on if the front is on and not in defrost mode.
Page 198: Warning Lights, Gages, And Indicators
Warning Lights, Gages, Gages can indicate when there may be or is a problem with one of your vehicle’s functions. and Indicators Often gages and warning lights work together to let you know when there is a problem with This part describes the warning lights and your vehicle.
Page 199: Instrument Panel Cluster
Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have used, and many other things you will need to know to drive safely and economically.
Page 200: Speedometer And Odometer
Speedometer and Odometer Trip Odometer The speedometer lets you see your speed in The trip odometer can tell you how far your both miles per hour (mph) and kilometers vehicle has been driven since you last set the per hour (km/h). trip odometer to zero.
Page 201: Tachometer
Tachometer Safety Belt Reminder Light When the key is turned to RUN or START, The tachometer a chime will sound for several seconds to remind displays the engine you buckle your safety belt. The driver safety speed in revolutions belt light will also come on and stay on for several per minute (rpm).
Page 202: Passenger Safety Belt Reminder Light
Passenger Safety Belt Airbag Readiness Light Reminder Light There is an airbag readiness light on the instrument panel, which shows the airbag Several seconds after the key is turned to RUN or symbol. The system checks the airbag’s electrical START, a chime will sound for several seconds system for malfunctions.
Page 203: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator CAUTION: Your vehicle has the passenger sensing system. Your rearview mirror has a passenger airbag status indicator. If the airbag readiness light stays on after you start your vehicle, it means the airbag system may not be working properly. The airbags in your vehicle may not inﬂate in a crash, or they could even inﬂate without a crash.
Page 204 Then, after several more seconds, the status indicator will light either ON or OFF, or either the CAUTION: on or off symbol to let you know the status of the right front passenger’s frontal airbag. If the on indicator comes on when If the word ON or the on symbol is lit on the you have a rear-facing child restraint passenger airbag status indicator, it means...
Page 205 CAUTION: CAUTION: Even though the passenger sensing Even though the passenger sensing system is designed to turn off the system is designed to turn off the right front passenger’s frontal airbag passenger’s frontal airbag if the system if the system detects a rear-facing child detects a rear-facing child restraint, restraint, no system is fail-safe, and no system is fail-safe, and no one can...
Page 206: Charging System Light
Charging System Light If, after several seconds, all status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger The charging system sensing system. See your dealer for service. light will come on brieﬂy when you turn on the ignition, but the...
Page 207: Voltmeter Gage
Voltmeter Gage Readings in the low warning zone may occur when a large number of electrical accessories are operating in the vehicle and the engine is When your engine is left idling for an extended period. This condition not running, but the is normal since the charging system is not able ignition is in RUN, to provide full power at engine idle.
Page 208: Brake System Warning Light
Brake System Warning Light When the ignition is on, the brake system warning light will come on when you set your parking brake. The light will stay on if your parking brake does not release fully. If it stays on after your parking brake is fully released, it means your vehicle has a brake problem.
Page 209: Anti-Lock Brake System Warning Light
Anti-Lock Brake System If the light comes on while you are driving, pull off the road and stop carefully. You may notice Warning Light that the pedal is harder to push or the pedal may go closer to the ﬂoor. It may take longer With the Anti-Lock to stop.
Page 210: Stabilitrak ® Service Light
® ® StabiliTrak Service Light StabiliTrak Indicator Light This light will come This warning light on brieﬂy when the should come on engine is started. brieﬂy when the engine is started. This light will come on if a problem is detected During most driving conditions, this light will not ®...
Page 211: Engine Coolant Temperature Gage
Engine Coolant Temperature Gage Tire Pressure Light This light will come on brieﬂy when you turn the ignition to RUN. United States Canada This light will also come on when one or more of your tires are signiﬁcantly underinﬂated. This gage shows the engine coolant temperature. If the gage pointer moves into the red area, it If your vehicle has a Driver Information means that your engine coolant has overheated.
Page 212: Malfunction Indicator Lamp
Malfunction Indicator Lamp Notice: If you keep driving your vehicle with this light on, after awhile, the emission controls Check Engine Light might not work as well, your vehicle’s fuel economy might not be as good, and the engine might not run as smoothly. This could lead to Your vehicle has a costly repairs that might not be covered by computer which...
Page 213 • If the light stops ﬂashing and remains on steady, Light Flashing — A misﬁre condition has been see “If the Light Is On Steady” following. detected. A misﬁre increases vehicle emissions and may damage the emission control system If the light continues to ﬂash, when it is safe to on your vehicle.
Page 214: Emissions Inspection And Maintenance Programs
Emissions Inspection and Did you just drive through a deep puddle of water? If so, your electrical system may be wet. The Maintenance Programs condition will usually be corrected when the Some state/provincial and local governments have electrical system dries out. A few driving trips or may begin programs to inspect the emission should turn the light off.
Page 215: Oil Pressure Gage
Oil Pressure Gage CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches ﬁre. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced. Notice: Lack of proper engine oil maintenance may damage the engine.
Page 216: Change Engine Oil Light
Change Engine Oil Light Security Light Your vehicle may This light will come on have a change brieﬂy when you turn engine oil light. the key toward START. When this light comes on it means that an oil The light will stay on until the engine starts. ®...
Page 217: Cruise Control Light
Cruise Control Light The performance may be reduced until the next time you drive your vehicle. If this light stays on, see your dealer as soon as possible for If your vehicle has a diagnosis and repair. Driver Information Center (DIC), this light This light may also come on if there is a problem will come on when with the Electronic Throttle Control (ETC)
Page 218: Service Four-Wheel Drive Warning Light
Service Four-Wheel Drive Check Gages Warning Light Warning Light The check gages light will come on brieﬂy This light should come when you are starting on brieﬂy when you the engine. turn on the ignition, as a check to show you it is working.
Page 219: Fuel Gage
Fuel Gage • The gage moves a little when you turn a corner or speed up. • The gage doesn’t go back to empty when you turn off the ignition. Low Fuel Warning Light The light next to the fuel gage will come on brieﬂy when you are starting the engine.
Page 220: Driver Information Center (Dic)
Driver Information Center (DIC) Your vehicle may have this feature. The Driver Information Center (DIC) display is located on the instrument panel cluster, below the speedometer. If your vehicle has DIC buttons, they are located on the steering wheel. The DIC can display information such as the trip odometer, fuel economy, customization features, and warning/status messages.
Page 221: Dic Operation And Displays
DIC Operation and Displays Trip Information Button The DIC comes on when the ignition is on. (Trip Information): Press the trip information After a short delay the DIC will display the button to scroll through the ODOMETER, TRIP A, information that was last displayed before the TRIP B, TIRE PRESSURES, and TIMER.
Page 222 You can also reset the TRIP A or TRIP B while Timer: The DIC can be used as a timer. Press they are displayed by pressing the reset stem on the select button while TIMER is displayed to the cluster. If you press and hold the reset stem or start the timer.
Page 223 Fuel Range: Press the fuel information button Press and hold the select button for one second until RANGE appears on the display. This while AVG. ECON is displayed to reset the average mode shows the remaining distance you can fuel economy. Average fuel economy will then be drive without refueling.
Page 224: Dic Warnings And Messages
Customization Button DIC Warnings and Messages Messages are displayed on the DIC to notify the (Customization): Press the customization driver that the status of the vehicle has changed button to access the VEHICLE SETTINGS and that some action may be needed to correct menu and customize the settings to your vehicle.
Page 225 CHANGE ENGINE OIL CHECK WASHER FLUID This message displays when the engine oil needs This message displays if the washer ﬂuid level is to be changed and service is required for your low. Adding washer ﬂuid to the windshield washer vehicle.
Page 226 ENGINE COOLANT HOT/ENGINE ICE POSSIBLE OVERHEATED This message may display if the outside temperature reaches a level where ice could form Notice: If you drive your vehicle while the on the roadway. If the temperature rises to a safe engine is overheating, severe engine damage level, the message clears.
Page 227 OIL PRESSURE LOW/STOP ENGINE REAR ACCESS OPEN This message displays and a chime sounds if the Notice: If you drive your vehicle while liftgate or liftglass is open while the ignition is in the engine oil pressure is low, severe engine RUN.
Page 228 SERVICE AIR BAG SERVICE CHARGING SYS (System) This message displays if there is a problem with This message displays if there is a problem with the the airbag system. Have your dealer/retailer battery charging system. Under certain conditions, inspect the system for problems. See Airbag the charging system light may also turn on in the Readiness Light on page 202 and Airbag System instrument panel cluster.
Page 229 SERVICE TIRE MONITOR STABILITRAK OFF This message displays if a part on the Tire This message displays when you press the ® Pressure Monitor (TPM) system is not working StabiliTrak button for more than ﬁve seconds properly. If you drive your vehicle while any of the or when stability control has been automatically ®...
Page 230 There are several conditions that can cause The DIC message and the Service Engine Soon this message to appear. light may come on again during a second trip if the fuel cap is still not tightened properly. • The message may display if the brake See Malfunction Indicator Lamp on page 212 system warning light is on.
Page 231: Dic Vehicle Customization
DIC Vehicle Customization Lock Doors Press the customization button until LOCK Your vehicle may have customization capabilities DOORS: IN GEAR appears in the display. that allow you to program some features to To select your preference for automatic locking, one setting based on your preference. All of the press the select button while LOCK DOORS: customizable options listed may not be available IN GEAR is displayed on the DIC.
Page 232 Unlock Doors Lock Feedback Press the customization button until UNLOCK Press the customization button until LOCK DOORS: IN PARK appears in the display. FEEDBACK: BOTH appears in the display. To select your preference for automatic unlocking, To select your preference for the feedback you press the select button while UNLOCK DOORS: receive when locking the vehicle with the Remote IN PARK is displayed on the DIC.
Page 233 Choose one of the available options and press the UNLOCK FEEDBACK: OFF: There will be no customization button while it is displayed on the feedback when unlocking the vehicle. DIC to select it and move on to the next feature. Choose one of the available options and press the customization button while it is displayed on the Unlock Feedback...
Page 234 The amount of time you choose will be the amount Choose one of the available options and press the of time that the headlamps stay on after you turn off customization button while it is displayed on the the vehicle. If you choose OFF, the headlamps will DIC to select it and move on to the next feature.
Page 235 Seat Recall SEAT RECALL: ON REMOTE: The driver’s memory seat, mirrors, and adjustable pedals Press the customization button until SEAT position you saved will be recalled when RECALL: OFF appears in the display. To select you unlock the vehicle with the Remote your preference for recall of the driver’s memory Keyless Entry (RKE) transmitter.
Page 236 Curb View Alarm Warning Press the customization button until CURB Press the customization button until ALARM VIEW: OFF appears in the display. To select WARNING: BOTH appears in the display. your preference for curb view, press the select To select your preference for alarm warning, button while CURB VIEW: OFF is displayed on press the select button while ALARM WARNING: the DIC.
Page 237 Language You can also scroll through the different languages by pressing and holding the trip reset stem Press the customization button until LANGUAGE: for four seconds, as long as you are in the ENGLISH appears in the display. To select odometer mode.
Page 238: Audio System(S)
Audio System(s) CAUTION: Determine which radio your vehicle has and then read the pages following to familiarize yourself This system provides you with a far greater with its features. access to audio stations and song listings. Driving without distraction is a necessity for a Giving extended attention to entertainment safer driving experience.
Page 239: Setting The Time
Notice: Before adding any sound equipment Your vehicle may have a feature called Retained to your vehicle, such as an audio system, Accessory Power (RAP). With RAP, the audio CD player, CB radio, mobile telephone, system can be played even after the ignition is or two-way radio, make sure that it can be turned off.
Page 240: Radio With Cd (Base)
Radio with CD (Base) Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming •...
Page 241 XM™ Satellite Radio Service INFO (Information): When the ignition is off, press this knob to display the time. XM™ is a satellite radio service that is based in For RDS, press the INFO knob to change what the 48 contiguous United States and Canada. displays while using RDS.
Page 242 AUTO VOL (Automatic Volume): With automatic The radio only seeks stations with a strong signal volume, the audio system adjusts automatically that are in the selected band. to make up for road and wind noise as you drive © ¨ ©...
Page 243 Setting Preset Stations Setting the Tone (Bass/Midrange/Treble) Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2 (if equipped), can be AUDIO: Push and release the AUDIO knob programed on the six numbered pushbuttons, ®...
Page 244 AUTO EQ (Automatic Equalization): Press this To adjust all tone and speaker controls to the button to select customized equalization settings middle position, push and hold the AUDIO knob designed for country/western, jazz, talk, pop, rock, when no tone or speaker control displays. ALL and classical.
Page 245 If the radio cannot ﬁnd the desired program To turn alternate frequency off, press and hold type, NONE displays and the radio returns to BAND again for two seconds. AF OFF displays. the last station you were listening to. The radio does not switch to other stations. This function does not apply for XM™...
Page 246 RDS Messages LOCKED: This message displays when the ® THEFTLOCK system has locked up. Take the INFO (Information): If the current station has vehicle to your dealer/retailer for service. a message, the information symbol displays. If any error occurs repeatedly, or if an error cannot Press this button to see the message.
Page 247 The CD player can play the smaller 3 inch (8 cm) Notice: If a label is added to a CD, or more single CDs with an adapter ring. Full-size CDs than one CD is inserted into the slot at a and the smaller CDs are loaded in the same time, or an attempt is made to play scratched manner.
Page 248 © ¨ © 3 REV (Reverse): Press and hold this pushbutton SEEK : Pressthe left arrow to go to the to quickly reverse within a track. Press and hold start of the current or to the previous track. Press this pushbutton for less than two seconds to ¨...
Page 249 • BAND: Press this button to listen to the radio The CD is dirty, scratched, wet, or while a CD is playing. The inactive CD remains upside down. inside the radio for future listening. • The air is very humid. If so, wait about an hour and try again.
Page 250: Radio With Cd (Mp3)
Radio with CD (MP3) Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming •...
Page 251 XM™ Satellite Radio Service DISPL (Display): When the ignition is turned off, press this knob to display the time. XM™ is a satellite radio service that is based in For RDS, press the DISPL knob to change the the 48 contiguous United States and Canada. display while using RDS.
Page 252 AUTO VOL (Automatic Volume): With automatic SEEK : Press the left or right arrow volume, the audio system adjusts automatically to go to the previous or to the next station and to make up for road and wind noise as you drive. stay there.
Page 253 Setting Preset Stations Setting the Tone (Bass/Midrange/Treble) Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2 (if equipped)), can be AUDIO: Push and release the AUDIO knob until programmed on the six numbered pushbuttons, ®...
Page 254 Adjusting the Speakers (Balance/Fade) Finding a Program Type (PTY) Station (RDS and XM™) AUDIO: To adjust the balance between the right and the left speakers, push and release To select and ﬁnd a desired PTY perform the the AUDIO knob until BAL (balance) displays. following: Turn the knob to move the sound toward the 1.
Page 255 BAND (AF – Alternate Frequency): Alternate INFO (Information): If the current station has frequency lets the radio switch to a stronger a message, the information symbol displays. station with the same program type. To turn Press this button to see the message. The alternate frequency on, press and hold BAND message can display the artist, song title, for two seconds.
Page 256 Radio Messages TRAF (Traffic): If TRAF displays, the tuned station broadcasts traffic announcements and CAL ERR (Calibration Error): The audio system you will hear a traffic announcement when has been calibrated for your vehicle from the the tuned radio station broadcasts one. factory.
Page 257: Playing A Cd
Playing a CD such as cracked, broken, or scratched, the CD will not play properly. If the surface of the CD is soiled, Insert a CD partway into the slot, label side up. The see Care of Your CDs and DVDs on page 302 for player pulls it in, and READING displays.
Page 258 2 FLD (Next): This pushbutton does not work SEEK : Press the left arrow to go to the while using a non-MP3 CD. start of the current or the previous track. Press the right arrow to go to the start of the next track. 3 REV (Reverse): Press and hold this pushbutton Pressing either the left or right...
Page 259 • CD AUX (Auxiliary): Press this button to play a The CD is dirty, scratched, wet, or CD while listening to the radio. The CD symbol upside down. displays when a CD is loaded. • The air is very humid. If so, wait about an hour and try again.
Page 260: Radio With Six-Disc Cd
Radio with Six-Disc CD Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming •...
Page 261 XM™ Satellite Radio Service INFO (Information): When the ignition is off, press this knob to display the time. XM™ is a satellite radio service that is based in For RDS, press the INFO knob to change what the 48 contiguous United States and Canada. displays while using RDS.
Page 262: Finding A Station
© ¨ © Set the volume at the desired level. Press this SCAN : Press and hold either the left button to select MIN (minimum), MED (medium), ¨ right SCAN or TYPE arrow for two seconds until or MAX (maximum). AUTO VOL displays. Each SCN displays and a beep sounds.
Page 263 Setting Preset Stations Setting the Tone (Bass/Midrange/Treble) Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2 (if equipped)), can be AUDIO: Push and release the AUDIO knob until programed on the six numbered pushbuttons, ®...
Page 264 Finding a Program Type (PTY) Station The radio saves separate AUTO EQ settings for each preset and source. (RDS and XM™) ® If the radio has the Bose audio system, the To select and ﬁnd a desired PTY perform the equalization settings are either CUSTOM or TALK.
Page 265 Setting Preset PTYs (RDS Only) SCAN: Scan the stations within a PTY by performing the following: These pushbuttons have factory PTY presets. 1. Press the TYPE button to activate program Up to 12 PTYs (six FM1 and six FM2), can type select mode.
Page 266: Rds Messages
RDS Messages Radio Messages CAL ERR (Calibration Error): The audio system INFO (Information): If the current station has a has been calibrated for your vehicle from the message, INFO displays. Press this button to factory. If CAL ERR displays, it means that the see the message.
Page 267 The CD player can play the smaller 3 inch (8 cm) Notice: If a label is added to a CD, or more single CDs with an adapter ring. Full-size CDs and than one CD is inserted into the slot at a the smaller CDs are loaded in the same manner.
Page 268 Playing a Speciﬁc Loaded CD To insert multiple CDs, do the following: 1. Turn the ignition on. For every CD loaded, a number displays. To play a speciﬁc CD, ﬁrst press the CD AUX button 2. Press and hold the LOAD button for (if not already in CD mode), then press the two seconds.
Page 269 If the CD is not removed, after 25 seconds, RPT (Repeat): With the repeat setting, one track the CD automatically pulls back into the player. or an entire CD can be repeated. If CD is pushed back into the player, before To use repeat, do the following: the 25-second time period is complete, the •...
Page 270 AUTO EQ (Automatic Equalization): Press To scan all loaded CDs, press and hold either © ¨ AUTO EQ to select the equalization setting the left or right SCAN arrow for more while playing a CD. The equalization is stored than four seconds until ALL CD SCAN displays and whenever a CD is played.
Page 271 Using Song List Mode 4. Press and hold the SONG LIST button to save the track into memory. When SONG The six-disc CD changer has a feature called LIST is pressed, one beep sounds. After song list. This feature is capable of saving two seconds of continuously pressing 20 track selections.
Page 272 To delete tracks from the song list, perform To delete the entire song list, perform the the following steps: following steps: 1. Turn the CD player on. 1. Turn the CD player on. 2. Press the SONG LIST button to turn song 2.
Page 273 CD Messages Listening to a DVD If your vehicle has the Rear Seat Entertainment CHECK CD: If this message displays and/or the (RSE) system and a DVD is playing, the DVD CD ejects, it could be for one of the following symbol displays indicating that the DVD is reasons: available and can be listened to through your...
Page 274: Using An Mp3
Using an MP3 The player is able to read and play a maximum of 50 folders, 50 playlists, 10 sessions, and MP3 CD-R Disc 255 ﬁles. Long ﬁle names, folder names, or playlist names can use more disc memory space than MP3 Format necessary.
Page 275 Empty Directory or Folder Order of Play If a root directory or a folder exists somewhere in Tracks are played in the following order: the ﬁle structure that contains only folders/ • Play begins from the ﬁrst track in the ﬁrst subfolders and no compressed ﬁles directly playlist and continues sequentially through beneath them, the player advances to the next...
Page 276 File System and Naming Playing an MP3 The song name that displays is the song name Insert a CD partway into the slot, label side up. that is contained in the ID3 tag. If the song The player pulls it in, and READING displays. name is not present in the ID3 tag, then the The CD should begin playing and the CD symbol radio displays the ﬁle name without the...
Page 277 If these problems occur, check the bottom surface 1 FLD (Previous Folder): Press the of the CD. If the surface of the CD is damaged, pushbutton to go to the ﬁrst track in the previous such as cracked, broken, or scratched, the CD does folder.
Page 278 4 FWD (Forward): Press and hold this pushbutton When in random, pressing and releasing either to advance quickly within a track. Press and SEEK arrow takes you to the next or previous hold this pushbutton for less than two seconds to random track.
Page 279 DISPL (Display): Press this knob to switch INFO (Information): INFO displays when a between track mode, folder/playlist mode, and current track has ID3 tag information. Press time of day mode. The display shows only this button to display the artist name and album eight characters, but there can be up to four pages contained in the tag.
Page 280: Xm Radio Messages
XM Radio Messages If you have a Radio with CD or Radio with Six-Disc CD, you can receive these radio display messages. Radio Display Message Condition Action Required XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696).
Page 281 Radio Display Message Condition Action Required No Info Song/Program Title No song title information is available at this time on this not available channel. The system is working properly. No Info Category Name No category information is available at this time on this not available channel.
Page 282 If you have a Radio with CD (MP3), you can receive these radio display messages. Radio Display Message Condition Action Required XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696).
Page 283 Radio Display Message Condition Action Required No Info Song/Program Title No song title information is available at this time on this not available channel. The system is working properly. No Info Category Name No category information is available at this time on this not available channel.
Page 284: Navigation/Radio System
Navigation/Radio System It also disables all other button operations from the remote control and the DVD player, with Your vehicle may have a navigation radio system. the exception of the eject button. Press this button again to restore operation of the DVD player. The navigation system has built-in features This button can also be used to turn the DVD intended to minimize driver distraction.
Page 285 The transmitters are located below the video display stored properly. If the foam ear pads do become screen. The headphones shut off automatically if damaged or worn out, the pads can be replaced they lose the signal from the system after about separately from the headphone set.
Page 286 Stereo RCA Jacks How to Change the Video Format when in the Auxiliary Mode The RCA jacks are located behind the video The auxiliary input video format is preset to NTSC. screen. The RCA jacks allow audio and video In some countries, the video format may be in signals to be connected from an auxiliary device the PAL system.
Page 287 Video Screen The RSE system always transmits the audio signal by infrared to the wireless headphones, The video screen is located in the overhead if there is audio available. See “Headphones” console. previously for more information. To use the video screen, do the following: The RSE system is capable of outputting audio 1.
Page 288 DVD Player Standard audio CDs, CD-R, CD-RW, Video CD and Photo CD/CD-R media are fully supported The DVD player is located in the overhead by this DVD player. DVD-R and DVD-RW media console. The DVD player can be controlled by the is supported if formatted as DVD-Video.
Page 289 DVD Player Buttons (Without Sunroof) SRCE (Source): Press this button to switch between the DVD player and an auxiliary source. (Stop): Press the button to stop playing, rewinding, or fast forwarding a DVD or CD. Press the button twice to return to the beginning of the DVD.
Page 290 DVD Player Buttons (With Sunroof) (Set-up Menu): Press the button to adjust the color, tint, brightness, contrast, display mode, and dynamic range compression. The dynamic range compression feature can be used to reduce loud audio and increase low audio produced by some DVDs. To change a feature back to the factory default setting, press the button to display the feature,...
Page 291 Playing a Disc If the disc has been ejected or if the stop button has been pressed twice, the disc resumes play at To play a disc, gently insert the disc with the label the beginning. side up into the loading slot. The DVD player continues loading the disc and the player Ejecting a Disc (DVD Player without automatically starts, if the vehicle is in RUN,...
Page 292 Remote Control Remote Control Buttons To use the remote control, aim it at the transmitter window below the video screen and press the desired button. Direct sunlight or very bright light can affect the ability of the RSE system to receive signals from the remote control. If the remote control does not seem to be working, the batteries may need to be replaced.
Page 293 (Set-up Menu): Press the button to adjust (Previous Track/Chapter): Press the button the color, tint, brightness, contrast, display to return to the start of the current track or chapter. mode, and dynamic range compression. The Press the button again to return to the previous dynamic range compression feature can be used track or chapter.
Page 294 (Main DVD Menu): Press the button to (Fast Forward): Press the button to fast access the DVD menu. The DVD menu is different forward the DVD or CD. To stop fast forwarding, on every DVD. Use the navigation press the button again.
Page 295 Battery Replacement Problem Recommended Action No power. The ignition might not To change the batteries, do the following: be in on or accessory. 1. Remove the battery compartment door located The parental control on the bottom of the remote control. button might have been turned on.
Page 296 Problem Recommended Action Problem Recommended Action In auxiliary mode, the Check the auxiliary After stopping the player, If the stop button was picture moves or scrolls. input connections at I push Play but pressed one time, the both devices. sometimes the DVD DVD player resumes Change the Video Format starts where I left off...
Page 297: Dvd Messages
DVD Messages Problem Recommended Action Sometimes the wireless Check for obstructions, The following errors can display on the video headphone audio cuts low batteries, reception screen: out or buzzes. range, and interference from cellular telephone Disc Format Error: This message displays if a towers or by using disc is inserted upside down, if the disc is not your cellular telephone...
Page 298: Rear Seat Audio (Rsa)
DVD Distortion Rear Seat Audio (RSA) There can be an experience with audio distortion This feature allows rear seat passengers to listen in the wireless headphones when operating to any of the sources: radio, CDs, or DVDs. cellular phones, scanners, CB radios, Global However, the rear seat passengers can only Positioning Systems (GPS)*, two-way radios, control the sources that the front seat passengers...
Page 299 SEEK: Press this button to advance to the next station or track and stay there. The display shows the selection. This function is inactive if the front seat passengers are listening to the same audio source. To scan preset stations, press and hold the SEEK button for two seconds and the radio advances to the next preset station.
Page 300: Theft-Deterrent Feature
Theft-Deterrent Feature Audio Steering Wheel Controls ® THEFTLOCK is designed to discourage theft of your vehicle’s radio. The feature works automatically by learning a portion of the Vehicle Identiﬁcation Number (VIN). If the radio is moved to a different vehicle, it does not operate and LOCKED displays.
Page 301: Radio Reception
Radio Reception PROG (Program): Press this button to play a station you have programmed on the radio Frequency interference and static during normal preset pushbuttons. The radio seeks preset radio reception can occur if items such as stations only with a strong signal that are in cellphone chargers, vehicle convenience the selected band.
Page 302: Care Of Your Cds And Dvds
FM Stereo Care of Your CDs and DVDs FM stereo gives the best sound, but FM signals Handle CDs carefully. Store them in their original reach about 10 to 40 miles (16 to 65 km). Tall cases or other protective cases and away from buildings or hills can interfere with FM signals, direct sunlight and dust.
Page 303: Fixed Mast Antenna
Fixed Mast Antenna Chime Level Adjustment The ﬁxed mast antenna can withstand most car The radio is used to adjust the vehicle’s chime washes without being damaged. If the mast should level. To change the volume level of the chime, ever become slightly bent, straighten it out by press and hold pushbutton 6 with the ignition hand.
Page 304 ✍ NOTES...
Page 305: Driving Your Vehicle
Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle . 306 City Driving ..........344 Defensive Driving ........306 Freeway Driving ........345 Drunken Driving ........307 Before Leaving on a Long Trip ....346 Control of a Vehicle ........310 Highway Hypnosis ........
Page 306: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and CAUTION: Your Vehicle Defensive driving really means “Be ready Defensive Driving for anything.” On city streets, rural roads, The best advice anyone can give about driving is: or expressways, it means “Always expect Drive defensively. the unexpected.”...
Page 307: Drunken Driving
Drunken Driving Many adults — by some estimates, nearly half the adult population — choose never to drink alcohol, Death and injury associated with drinking and so they never drive after drinking. For persons driving is a national tragedy. It is the number under 21, it is against the law in every U.S.
Page 308 According to the American Medical Association, a It is the amount of alcohol that counts. For example, 180 lb (82 kg) person who drinks three 12 ounce if the same person drank three double martinis (355 ml) bottles of beer in an hour will end up with (3 ounces or 90 ml of liquor each) within an hour, a BAC of about 0.06 percent.
Page 309 But the ability to drive is affected well below a can make crash injuries worse, especially injuries to BAC of 0.10 percent. Research shows that the brain, spinal cord, or heart. This means that the driving skills of many people are impaired when anyone who has been drinking —...
Page 310: Control Of A Vehicle
Control of a Vehicle Average reaction time is about three-fourths of a second. But that is only an average. It might be less You have three systems that make your vehicle go with one driver and as long as two or three seconds where you want it to go.
Page 311: Anti-Lock Brake System (Abs)
Anti-Lock Brake System (ABS) If you keep pace with the traffic and allow realistic following distances, you will eliminate a lot of Your vehicle has the Anti-Lock Brake unnecessary braking. That means better braking System (ABS), an advanced electronic braking and longer brake life.
Page 312 ABS can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. Let us say the road is wet and you are driving safely.
Page 313: Braking In Emergencies
® StabiliTrak System Remember: ABS does not change the time you need to get your foot up to the brake pedal or ® Your vehicle is equipped with StabiliTrak always decrease stopping distance. If you get too Electronic Stability Control (ESC) which combines close to the vehicle in front of you, you will not have antilock brake, traction and stability control time to apply the brakes if that vehicle suddenly...
Page 314 ® For more information on the stability messages, The StabiliTrak system has three modes of see DIC Warnings and Messages on page 224. operation: STABILITRAK ON, TRACTION CONTROL OFF, and STABILITRAK OFF. ® When the StabiliTrak STABILITRAK ON -The vehicle will default to system is both on and STABILITRAK ON every time the driver starts the actively controlling...
Page 315 Traction Control Off It is recommended to leave the system on for normal driving conditions, but it may be necessary In this mode, stability control and brake-traction to turn the system off if your vehicle is stuck in control are functional. Engine speed management sand, mud, ice or snow, and you may want will be modiﬁed and the driven wheels can spin to “rock”...
Page 316 ® The following chart describes the StabiliTrak system events and the corresponding messages and lights that will be displayed on the instrument panel cluster. Vehicles with a DIC Vehicles without a DIC ® ® ® Event StabiliTrak StabiliTrak StabiliTrak DIC Message Indicator Light Indicator Light Service Light...
Page 317 Vehicles with a DIC Vehicles without a DIC Event ® ® ® StabiliTrak StabiliTrak StabiliTrak DIC Message Indicator Light Indicator Light Service Light ® StabiliTrak system ® Solid Service StabiliTrak Solid Solid is disabled due to a system fault. ® StabiliTrak system ®...
Page 318: Power Steering
® Steering StabiliTrak will turn off automatically if a problem is ® detected in the system. The StabiliTrak light will Power Steering come on and SERVICE STABILITRAK will be displayed on the DIC. For vehicles without a DIC, If you lose power steering assist because the ®...
Page 319 Steering in Emergencies Suppose you are steering through a sharp curve. Then you suddenly accelerate. Both control There are times when steering can be more systems — steering and acceleration — have to effective than braking. For example, you come do their work where the tires meet the road.
Page 320: Off-Road Recovery
Off-Road Recovery You may ﬁnd that your right wheels have dropped off the edge of a road onto the shoulder while you are driving. An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either...
Page 321: Passing
Passing delay your pass. A broken center line usually indicates it is all right to pass, providing The driver of a vehicle about to pass another on a the road ahead is clear. Never cross a solid two-lane highway waits for just the right moment, line on your side of the lane or a double solid accelerates, moves around the vehicle ahead, then line, even if the road seems empty of...
Page 322: Loss Of Control
• Loss of Control If other vehicles are lined up to pass a slow vehicle, wait your turn. But take care that Let us review what driving experts say about what someone is not trying to pass you as you happens when the three control systems —...
Page 323: Competitive Driving
Competitive Driving If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the See your warranty book before using your vehicle way you want the vehicle to go. If you start for competitive driving. After reviewing your steering quickly enough, your vehicle may warranty book, please see the GM Performance straighten out.
Page 324 Before You Go Off-Roading The airbag system is designed to work properly under a wide range of conditions, including off-road There are some things to do before you go out. usage. Observe safe driving speeds, especially For example, be sure to have all necessary on rough terrain.
Page 325 Loading Your Vehicle for There are some important things to remember about how to load your vehicle. Off-Road Driving • The heaviest things should be on the load ﬂoor and forward of the rear axle. Put CAUTION: heavier items as far forward as you can. •...
Page 326 Environmental Concerns Traveling to Remote Areas Off-road driving can provide wholesome and It makes sense to plan your trip, especially when satisfying recreation. However, it also raises going to a remote area. Know the terrain and plan environmental concerns. We recognize these your route.
Page 327 Scanning the Terrain Controlling your vehicle is the key to successful off-road driving. One of the best ways to control Off-road driving can take you over many different your vehicle is to control your speed. Here are kinds of terrain. You need to be familiar with some things to keep in mind.
Page 328 Surface Obstacles: Unseen or hidden obstacles When you drive over bumps, rocks, or other can be hazardous. A rock, log, hole, rut, or obstacles, the wheels can leave the ground. If this bump can startle you if you are not prepared for happens, even with one or two wheels, you them.
Page 329: Approaching A Hill
Driving on Off-Road Hills smooth, constant incline with only a small change in elevation where you can easily see all the way to Off-road driving often takes you up, down, or the top. On a large hill, the incline may get steeper across a hill.
Page 330 Driving Uphill • Ease up on your speed as you approach the top of the hill. Once you decide you can safely drive up the hill, • Attach a ﬂag to the vehicle to make you more you need to take some special steps. visible to approaching traffic on trails or hills.
Page 331 • As you are backing down the hill, put your left What should I do if my vehicle stalls, hand on the steering wheel at the 12 o’clock or is about to stall, and I cannot make position. This way, you will be able to tell if the it up the hill? wheels are straight and maneuver as you back If this happens, there are some things you...
Page 332 Suppose, after stalling, I try to back down the hill and decide I just cannot do it. What CAUTION: should I do? Set the parking brake, put the transmission in Shifting the transfer case to NEUTRAL PARK (P) and turn off the engine. Leave the can cause your vehicle to roll even if the vehicle and go get some help.
Page 333 Driving Downhill CAUTION: When off-roading takes you downhill, you will want to consider a number of things: • Heavy braking when going down a hill can How steep is the downhill? Will I be able to cause your brakes to overheat and fade. maintain vehicle control? This could cause loss of control and a •...
Page 334 Am I likely to stall when going downhill? CAUTION: It is much more likely to happen going uphill. But if it happens going downhill, here Driving across an incline that is too steep is what to do. will make your vehicle roll over. You could 1.
Page 335 • Surface conditions can be a problem when you What if I am driving across an incline that drive across a hill. Loose gravel, muddy spots, is not too steep, but I hit some loose or even wet grass can cause the tires to slip gravel and start to slide downhill.
Page 336 Stalling on an Incline CAUTION: Getting out on the downhill (low) side of a vehicle stopped across an incline is dangerous. If the vehicle rolls over, you could be crushed or killed. Always get out on the uphill (high) side of the vehicle and stay well clear of the rollover path.
Page 337 Driving in Mud, Sand, Snow, or Ice Hard packed snow and ice offer the worst tire traction. On these surfaces, it is very easy to lose When you drive in mud, snow, or sand, the wheels control. On wet ice, for example, the traction is will not get good traction.
Page 338 Driving in Water If the water is not too deep, drive slowly through it. At faster speeds, water splashes on the ignition system and your vehicle can stall. Stalling can also occur if you get the tailpipe under water. And, CAUTION: as long as the tailpipe is under water, you will never be able to start the engine.
Page 339: Driving At Night
Driving at Night No one can see as well at night as in the daytime. But as we get older these differences increase. Night driving is more dangerous than day driving. A 50-year-old driver might require at least twice as One reason is that some drivers are likely to much light to see the same thing at night as a be impaired —...
Page 340: Driving In Rain And On Wet Roads
Driving in Rain and on Wet Roads Keep the windshield and all the glass on your vehicle clean — inside and out. Glare at night is made much worse by dirt on the glass. Even the inside of the glass can build up a ﬁlm caused by dust.
Page 341 The surface may get wet suddenly when your reﬂexes are tuned for driving on dry pavement. CAUTION: The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good Wet brakes can cause accidents. They shape, a heavy rain can make it harder to see may not work as well in a quick stop and road signs and traffic signals, pavement markings,...
Page 342 Hydroplaning Driving Through Deep Standing Water Hydroplaning is dangerous. So much water can Notice: If you drive too quickly through build up under your tires that they can actually ride deep puddles or standing water, water can on the water. This can happen if the road is wet come in through the engine’s air intake enough and you are going fast enough.
Page 343 Driving Through Flowing Water Some Other Rainy Weather Tips • Besides slowing down, allow some extra following distance. And be especially careful CAUTION: when you pass another vehicle. Allow yourself more clear room ahead, and be prepared to Flowing or rushing water creates strong have your view restricted by road spray.
Page 344: City Driving
City Driving Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
Page 345: Freeway Driving
Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic ﬂow. Treat the left lane on a freeway as a passing lane.
Page 346: Before Leaving On A Long Trip
Before Leaving on a Long Trip Before changing lanes, check your mirrors. Then use your turn signal. Make sure you are ready. Try to be well rested. Just before you leave the lane, glance quickly If you must start when you are not fresh — such over your shoulder to make sure there is not as after a day’s work —...
Page 347: Highway Hypnosis
Highway Hypnosis Here are some things you can check before a trip: • Windshield Washer Fluid: Is the reservoir Is there actually such a condition as highway full? Are all windows clean inside and outside? hypnosis? Or is it just plain falling asleep at the •...
Page 348: Hill And Mountain Roads
Hill and Mountain Roads If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. See Off-Road Driving (Except SS) on page 323 for information about driving off-road.
Page 349 • Know how to go uphill. You may want to shift down to a lower gear. The lower gears help CAUTION: cool your engine and transmission, and you can climb the hill better. Coasting downhill in NEUTRAL (N) or with •...
Page 350: Winter Driving
Winter Driving Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and reﬂective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet, or a couple of burlap bags to help provide traction.
Page 351 Accelerate gently. Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. The Anti-Lock Brake System (ABS) improves your vehicle’s stability when you make a hard stop on a slippery road.
Page 352 If You Are Caught in a Blizzard If you are stopped by heavy snow, you could be in a serious situation. You should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow.
Page 353 Run your engine only as long as you must. This saves fuel. When you run the engine, make it CAUTION: go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat Snow can trap exhaust gases under that you get and it keeps the battery charged.
Page 354: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
If Your Vehicle is Stuck in Sand, Notice: Spinning the wheels can destroy parts of your vehicle as well as the tires. If you Mud, Ice, or Snow spin the wheels too fast while shifting the transmission back and forth, you can In order to free your vehicle when it is stuck, you destroy the transmission.
Page 355: Recovery Hooks
Recovery Hooks CAUTION: These hooks, when used, are under a lot of force. Always pull the vehicle straight out. Never pull on the hooks at a sideways angle. The hooks could break off and you or others could be injured from the chain or cable snapping back.
Page 356: Loading Your Vehicle
Loading Your Vehicle Tire and Loading Information Label It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options.
Page 357 The Tire and Loading Information label also shows 4. The resulting ﬁgure equals the available the size of the original equipment tires (C) and amount of cargo and luggage load capacity. the recommended cold tire inﬂation pressures (D). For example, if the “XXX” amount equals For more information on tires and inﬂation see 1400 lbs and there will be ﬁve 150 lb Tires on page 448 and Inﬂation - Tire Pressure on...
Page 358 Example 1 Example 2 Item Description Total Item Description Total Vehicle Capacity Weight Vehicle Capacity Weight 1,000 lbs (453 kg) 1,000 lbs (453 kg) for Example 1 = for Example 2 = Subtract Occupant Subtract Occupant Weight 150 lbs 300 lbs (136 kg) Weight 150 lbs 750 lbs (136 kg) (68 kg) ×...
Page 359 Refer to your vehicle’s tire and loading information label for speciﬁc information about your vehicle’s capacity weight and seating positions. The combined weight of the driver, passengers, and cargo should never exceed your vehicle’s capacity weight. Your vehicle may have an electronically controlled air suspension system that automatically keeps your vehicle level as you load and unload your vehicle.
Page 360 Certiﬁcation/Tire Label The GVWR includes the weight of the vehicle, all occupants, fuel, cargo, and trailer tongue weight, if pulling a trailer. The Certiﬁcation/Tire label also tells you the maximum weights for the front and rear axles, called Gross Axle Weight Rating (GAWR). To ﬁnd out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle.
Page 361 CAUTION: CAUTION: Do not load your vehicle any heavier than Things you put inside your vehicle can the Gross Vehicle Weight Rating (GVWR), strike and injure people in a sudden stop or either the maximum front or rear Gross or turn, or in a crash. Axle Weight Rating (GAWR).
Page 362: Adding A Snow Plow Or Similar Equipment
Adding a Snow Plow or Similar Recreational Vehicle Towing Equipment Recreational vehicle towing means towing your vehicle behind another vehicle – such as behind a Your vehicle was neither designed nor intended motorhome. The two most common types of for a snow plow. recreational vehicle towing are known as “dinghy Notice: Adding a snow plow or similar towing”...
Page 363 • Dinghy Towing Do you have the proper towing equipment? See your dealer or trailering professional Two-Wheel-Drive Vehicles for additional advice and equipment Notice: If you tow your vehicle with all recommendations. four wheels on the ground, the drivetrain • Is your vehicle ready to be towed? Just as components could be damaged.
Page 364 Four-Wheel-Drive Vehicles 3. Firmly set the parking brake. 4. Securely attach the vehicle being towed to the tow vehicle. CAUTION: Shifting a four-wheel-drive vehicle’s transfer case into NEUTRAL can cause your vehicle to roll even if the transmission is in PARK (P). You or others could be injured.
Page 365 Dolly Towing CAUTION: Front Towing (Front Wheels Off the Ground) Shifting a four-wheel-drive vehicle’s Two-Wheel-Drive Vehicles transfer case into NEUTRAL can cause Notice: If you tow a two-wheel-drive vehicle your vehicle to roll even if the with the rear wheels on the ground, the transmission is in PARK (P).
Page 366 Rear Towing (Rear Wheels Off the 3. Shift the transmission in PARK (P). Ground) 4. Follow the dolly manufacturer’s instructions to attach and secure the vehicle being towed to (Two-Wheel or Four-Wheel-Drive Vehicles) the dolly and then the loaded dolly to the tow vehicle.
Page 367: Electronically Controlled Air Suspension System
Electronically Controlled Air You may hear the compressor operating when you load your vehicle, and periodically as the system Suspension System adjusts the vehicle to the standard ride height. Your vehicle may be equipped with an Load leveling will not function normally with electronically controlled air suspension system that the inﬂator hose attached to the inﬂator outlet.
Page 368: Towing A Trailer
Towing a Trailer If the suspension remains at a low height, the rear axle load has exceeded GAWR (Gross Axle Weight Rating). When the overload protection mode is activated, the compressor operates CAUTION: for about 30 seconds to one minute without raising the vehicle depending on the amount of overload.
Page 369 If You Do Decide To Pull A Trailer Notice: Pulling a trailer improperly can damage your vehicle and result in costly repairs If you do, here are some important points: that would not be covered by your warranty. • Always follow the instructions in this section There are many different laws, including speed and check with your dealer/retailer for more limit restrictions, having to do with trailering.
Page 370 • Weight of the Trailer Then, during the ﬁrst 500 miles (800 km) that you tow a trailer, don’t drive over 50 mph How heavy can a trailer safely be? (80 km/h) and don’t make starts at full throttle. This helps your engine and other parts of It depends on how you plan to use your rig.
Page 371 Look in the following chart to ﬁnd the maximum trailer weight for your vehicle. Vehicle Axle Ratio Max.Trailer Wt. *GCWR 3.42 5,400 lbs (2 449 kg) 10,000 lbs (4 536 kg) 2WD TrailBlazer (L6 Engine) 3.73 5,900 lbs (2 676 kg) 10,500 lbs (4 763 kg) 4.10 6,400 lbs (2 903 kg)
Page 372 You can ask your dealer for our trailering load to the GVW because your vehicle will be information or advice, or you can write us at the carrying that weight, too. See Loading Your address listed in your Warranty and Owner Vehicle on page 356 for more information about Assistance Information Booklet.
Page 373 Do not exceed the maximum allowable tongue It has a GVWR of 7,200 lbs (3 266 kg), a RGAWR weight for your vehicle. Choose the shortest hitch of 4,000 lbs (1 814 kg) and a GCWR (Gross extension that will position the hitch ball closest Combination Weight Rating) of 14,000 lbs to the vehicle.
Page 374 But let’s say your speciﬁc vehicle is equipped with 1.5 times the actual weight. Dividing the 900 lbs some of the latest options and you have a front (408 kg) by 1.5 leaves you with being able to seat passenger and two rear seat passengers with handle only 600 lbs (272 kg) of tongue weight.
Page 375 Hitches If you use a step-bumper hitch, the bumper could be damaged in sharp turns. Make sure there is It’s important to have the correct hitch equipment. ample room when turning to avoid contact between Crosswinds, large trucks going by and rough roads the trailer and the bumper.
Page 376 Trailer Brakes Driving with a Trailer If your trailer weighs more than 1,500 lbs (680 kg) loaded, then it needs its own brakes — and CAUTION: they must be adequate. Be sure to read and follow the instructions for the trailer brakes so you’ll be If you have a rear-most window open and able to install, adjust and maintain them properly.
Page 377 During your trip, check occasionally to be sure CAUTION: (Continued) that the load is secure, and that the lamps and any trailer brakes are still working. Do not use the climate control setting Following Distance for maximum air because it only Stay at least twice as far behind the vehicle ahead recirculates the air inside your vehicle.
Page 378 Making Turns Driving On Grades Reduce speed and shift to a lower gear before Notice: Making very sharp turns while you start down a long or steep downgrade. If you trailering could cause the trailer to come in don’t shift down, you might have to use your contact with the vehicle.
Page 379 Parking on Hills 4. Reapply the regular brakes. Then apply your parking brake, and then shift into PARK (P). 5. Release the regular brakes. CAUTION: CAUTION: You really should not park your vehicle, with a trailer attached, on a hill. If something goes wrong, your rig could start It can be dangerous to get out of your to move.
Page 380 When You Are Ready to Leave After Maintenance When Trailer Towing Parking on a Hill Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance 1. Apply your regular brakes and hold the Schedule for more on this. Things that are pedal down while you: especially important in trailer operation are •...
Page 381 Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: • Yellow: Left Stop/Turn Signal • Dark Green: Right Stop/Turn Signal • Brown: Running Lamps • White: Ground • Light Green: Back-up Lamps • Dark Blue: Electric Brakes • Red: Battery Feed (The chassis wiring ring terminal must be fastened to a stud on the underhood electrical center before the trailer...
Page 382 Your vehicle is also equipped with wiring for an This harness also contains the following trailer electric trailer brake controller. These wires circuits that are not connected to the four-pin trailer are located inside the vehicle on the driver’s side connector: under the instrument panel.
Page 383: Service And Appearance Care
Section 5 Service and Appearance Care Service ............386 Automatic Transmission Fluid ....411 Accessories and Modiﬁcations ....386 Engine Coolant .......... 414 California Proposition 65 Warning ....386 Radiator Pressure Cap ......418 Doing Your Own Service Work ....387 Engine Overheating ........
Page 384 Section 5 Service and Appearance Care Windshield Wiper Blade Replacement ..444 Secondary Latch System ......484 Storing a Flat or Spare Tire and Tools ..488 Tires ............448 Spare Tire ..........491 Winter Tires ..........449 Tire Sidewall Labeling ....... 450 Appearance Care ........
Page 385 Section 5 Service and Appearance Care Vehicle Identiﬁcation ........501 Power Windows and Other Vehicle Identiﬁcation Number (VIN) ... 501 Power Options ........502 Service Parts Identiﬁcation Label ....501 Fuses and Circuit Breakers ....... 503 Engine Compartment Fuse Block ....503 Electrical System ........
Page 386: Service
Service Accessories and Modiﬁcations When you add non-GM accessories to your vehicle Your dealer knows your vehicle best and wants they can affect your vehicle’s performance and you to be happy with it. We hope you will go safety, including such things as, airbags, braking, to your dealer for all your service needs.
Page 387: Doing Your Own Service Work
Doing Your Own Service Work Your vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on CAUTION: page 86. You should keep a record with all parts receipts and list the mileage and the date of any service You can be injured and your vehicle could work you perform.
Page 388: Fuel
Fuel If this occurs, use a gasoline rated at 87 octane or higher as soon as possible. If you are using Use of the recommended fuel is an important part gasoline rated at 87 octane or higher and you hear of the proper maintenance of your vehicle.
Page 389: Gasoline Speciﬁcations
Gasoline Speciﬁcations Lamp on page 212. If this occurs, return to your authorized GM dealer for diagnosis. If it is At a minimum, gasoline should meet ASTM determined that the condition is caused by the speciﬁcation D 4814 in the United States or type of fuel used, repairs may not be covered by CAN/CGSB-3.5 in Canada.
Page 390: Fuels In Foreign Countries
Gasolines containing oxygenates, such as ethers General Motors recommends against the use of and ethanol, and reformulated gasolines may such gasolines. Fuels containing MMT can reduce be available in your area. General Motors the life of spark plugs and the performance of recommends that you use these gasolines if they the emission control system may be affected.
Page 391: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling.
Page 392 There may also be a light that comes on in the instrument panel to let you know if your gas cap CAUTION: is not properly installed. See Check Gas Cap Light on page 219 for more information. Fuel can spray out on you if you open the fuel cap too quickly.
Page 393: Filling A Portable Fuel Container
Filling a Portable Fuel Container CAUTION: (Continued) CAUTION: • Bring the ﬁll nozzle in contact with the inside of the ﬁll opening before operating the nozzle. Contact should Never ﬁll a portable fuel container while be maintained until the ﬁlling is it is in your vehicle.
Page 394: Checking Things Under The Hood
Checking Things Under Hood Release the Hood 1. To open the hood, ﬁrst pull the handle with this symbol on it. It is located CAUTION: inside the vehicle under the instrument Things that burn can get on hot engine panel on the parts and start a ﬁre.
Page 395 Before closing the hood, be sure all the ﬁller caps are on properly. Then lift the hood to relieve pressure on the prop rod. Remove the prop rod from its slot in the hood and return the prop to its retainer. Lower the hood 6 to 8 inches (15 to 20 cm) above the vehicle and release it to latch fully.
Page 396: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the 4.2L L6 engine, here is what you will see:...
Page 397 A. Engine Air Cleaner/Filter. See Engine Air G. Radiator Pressure Cap. See Radiator Pressure Cleaner/Filter on page 410. Cap on page 418. B. Engine Coolant Recovery Tank. See Cooling H. Engine Oil Fill Cap. See “When to Add Engine System on page 420. Oil”...
Page 398 When you open the hood on the 5.3L V8 engine, here is what you will see:...
Page 399 A. Engine Coolant Recovery Tank. See Cooling G. Radiator Pressure Cap. See Radiator Pressure System on page 420. Cap on page 418. B. Engine Air Cleaner/Filter. See Engine Air H. Remote Negative (−) Terminal (Marked GND). Cleaner/Filter on page 410. See Jump Starting on page 432.
Page 400 When you open the hood on the 6.0L V8 TrailBlazer SS engine, here is what you will see:...
Page 401 A. Engine Coolant Recovery Tank. See Cooling G. Radiator Pressure Cap. See Radiator Pressure System on page 420. Cap on page 418. B. Engine Air Cleaner/Filter. See Engine Air H. Remote Negative (−) Terminal (Marked GND). Cleaner/Filter on page 410. See Jump Starting on page 432.
Page 402: Engine Oil
Engine Oil When to Add Engine Oil Checking Engine Oil It is a good idea to check the engine oil every time you get fuel. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground.
Page 403 For engine oil crankcase capacity, see Capacities Be sure to add enough oil to put the level and Speciﬁcations on page 513. somewhere in the proper operating range. Push the dipstick all the way back in when you Notice: Do not add too much oil. If the engine are through.
Page 404 What Kind of Engine Oil to Use Look for three things: • GM6094M Except Vehicles with 6.0L V8 (VIN Code H) Engine Your vehicle’s engine requires oil meeting GM Standard GM6094M. Look for and use only an oil that meets GM Standard GM6094M.
Page 405 • Notice: Use only engine oil identiﬁed as Oils meeting meeting GM Standard GM6094M and showing these requirements the American Petroleum Institute Certiﬁed should have the For Gasoline Engines starburst symbol. starburst symbol Failure to use the recommended oil can on the container.
Page 406 For 6.0L V8 (VIN Code H) Engine Look for three things: Vehicles Only • GM4718M Your vehicle’s engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identiﬁed as synthetic. However, not all synthetic oils will meet this GM standard.
Page 407 • Your vehicle’s engine is ﬁlled at the factory Oils meeting ® with a Mobil 1 synthetic oil, which meets all these requirements requirements for your vehicle. should have the starburst symbol Substitute Engine Oil: When adding oil to on the container. maintain engine oil level, oil meeting This symbol indicates GM Standard GM4718M may not be available.
Page 408: Engine Oil Life System
Engine Oil Life System Change your oil as soon as possible within the next 600 miles (1 000 km). It is possible that, if you When to Change Engine Oil are driving under the best conditions, the oil life system may not indicate that an oil change is Your vehicle has a computer system that lets you necessary for over a year.
Page 409 How to Reset the Engine Oil Life System What to Do with Used Oil The Engine Oil Life System calculates when to Used engine oil contains certain elements that may change your engine oil and ﬁlter based on vehicle be unhealthy for your skin and could even cause use.
Page 410: Engine Air Cleaner/Filter
Engine Air Cleaner/Filter How to Inspect the Engine Air Cleaner/Filter See Engine Compartment Overview To inspect the air cleaner/ﬁlter remove the ﬁlter on page 396 for the from the vehicle and lightly shake the ﬁlter to location of the engine air release loose dust and dirt.
Page 411: Automatic Transmission Fluid
Automatic Transmission Fluid CAUTION: When to Check and Change Automatic Transmission Fluid Operating the engine with the air A good time to check your automatic transmission cleaner/ﬁlter off can cause you or others ﬂuid level is when the engine oil is changed. to be burned.
Page 412 Wait at least 30 minutes before checking the If it is colder than 50°F (10°C), you may have to transmission ﬂuid level if you have been driving: idle the engine longer. Should the ﬂuid level be low during this cold check, you must check the ﬂuid •...
Page 413 Then, without shutting off the engine, follow these steps: 1. Flip the handle up and then remove the dipstick and wipe it with a clean rag or paper towel. The automatic transmission dipstick handle with this symbol on it is located in the engine compartment on 3.
Page 414: Engine Coolant
How to Add Automatic Engine Coolant Transmission Fluid The cooling system in your vehicle is ﬁlled with ® DEX-COOL engine coolant. This coolant is Refer to the Maintenance Schedule to determine designed to remain in your vehicle for ﬁve years or what kind of transmission ﬂuid to use.
Page 415 ® Notice: Using coolant other than DEX-COOL may cause premature engine, heater core, CAUTION: or radiator corrosion. In addition, the engine coolant may require changing sooner, at Adding only plain water to your cooling the ﬁrst maintenance service after each 30,000 miles (50 000 km) or 24 months, system can be dangerous.
Page 416 Checking Coolant If you have to add coolant more than four times a year, have your dealer check your cooling system. The engine coolant Notice: If you use extra inhibitors and/or recovery tank is in the additives in your vehicle’s cooling system, engine compartment on you could damage your vehicle.
Page 417 Adding Coolant Add coolant mixture at the recovery tank, but be careful not to spill it. If you need more coolant, add the proper ® DEX-COOL coolant mixture at the coolant recovery tank. CAUTION: CAUTION: You can be burned if you spill coolant on hot engine parts.
Page 418: Radiator Pressure Cap
Radiator Pressure Cap If Steam Is Coming From Your Engine Notice: If the pressure cap is not tightly CAUTION: installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. Steam from an overheated engine can See Engine Compartment Overview on page 396 burn you badly, even if you just open the for information on location.
Page 419 If No Steam Is Coming From Your If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for Engine about 10 minutes. If the warning does not If you get an engine overheat warning but see or come back on, you can drive normally.
Page 420: Cooling System
Cooling System When you decide it is safe to lift the hood, here is what you will see: 5.3L V8 Engine shown, 6.0L V8 Engine similar A. Coolant Recovery Tank B. Radiator Pressure Cap C. Engine Fan 4.2L L6 Engine A.
Page 421 The coolant level should If there seems to be no leak, start the engine be at least up to the again. The engine cooling fan speed should FULL COLD mark. increase when idle speed is doubled by pushing If it is not, you may have the accelerator pedal down.
Page 422 How to Add Coolant to the Coolant Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and Recovery Tank other parts. Use the recommended coolant and If you have not found a problem yet, but the the proper coolant mixture.
Page 423 How to Add Coolant to the Radiator If the overheat warning continues, there is one more thing you can try. You can add the proper coolant mixture directly to the radiator, but be sure the cooling system is cool before you do it. CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn...
Page 424 ® 3. Fill the radiator with the proper DEX-COOL 4. Then ﬁll the coolant recovery tank to the coolant mixture, up to the base of the ﬁller FULL COLD mark. neck. See Engine Coolant on page 414 5. Put the cap back on the coolant recovery tank, for more information about the proper coolant but leave the radiator pressure cap off.
Page 425: Engine Fan Noise
Engine Fan Noise Your vehicle has a clutched engine cooling fan. When the clutch is engaged, the fan spins faster to provide more air to cool the engine. In most everyday driving conditions the clutch is not engaged. This improves fuel economy and reduces fan noise.
Page 426: Power Steering Fluid
Power Steering Fluid How to Check Power Steering Fluid To check the power steering ﬂuid, do the following: See Engine 1. Turn the key off and let the engine Compartment Overview compartment cool down. on page 396 for reservoir location. 2.
Page 427: Windshield Washer Fluid
Windshield Washer Fluid Notice: • When using concentrated washer ﬂuid, What to Use follow the manufacturer’s instructions for adding water. When you need windshield washer ﬂuid, be sure • to read the manufacturer’s instructions before Do not mix water with ready-to-use washer use.
Page 428: Brakes
Brakes So, it is not a good idea to top off the brake ﬂuid. Adding brake ﬂuid will not correct a leak. If you Brake Fluid add ﬂuid when the linings are worn, then you will have too much ﬂuid when you get new brake The brake master linings.
Page 429 Checking Brake Fluid CAUTION: You can check the brake ﬂuid without taking off the cap. Look at the brake ﬂuid With the wrong kind of ﬂuid in the brake reservoir. The ﬂuid level system, the brakes may not work well. should be above MIN.
Page 430 Brake Wear Some driving conditions or climates can cause a brake squeal when the brakes are ﬁrst applied Your vehicle has four-wheel disc brakes. or lightly applied. This does not mean something is wrong with the brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the Properly torqued wheel nuts are necessary to help brake pads are worn and new pads are needed.
Page 431: Battery
Replacing Brake System Parts Battery The braking system on a vehicle is complex. Your vehicle has a maintenance free battery. Its many parts have to be of top quality and work When it is time for a new battery, get one that has well together if the vehicle is to have really the replacement number shown on the original ®...
Page 432: Jump Starting
Vehicle Storage Jump Starting If you are not going to drive your vehicle for If your vehicle’s battery has run down, you may 25 days or more, remove the black, negative (−) want to use another vehicle and some jumper cable from the battery.
Page 433 Notice: Ignoring these steps could result in To avoid the possibility of the vehicles rolling, costly damage to your vehicle that would set the parking brake ﬁrmly on both vehicles not be covered by your warranty. involved in the jump start procedure. Put an automatic transmission in PARK (P) or a Trying to start your vehicle by pushing or manual transmission in NEUTRAL before...
Page 434 4. Open both hoods and locate the batteries. Find the positive (+) and negative (−) CAUTION: terminals on each battery. Your vehicle has a remote negative (−) jump starting terminal. Using a match near a battery can cause You should always use this remote terminal instead of the terminal on the battery.
Page 435 6. Connect the red positive (+) cable to CAUTION: the positive (+) terminal of the dead Fans or other moving engine parts can battery. Use a injure you badly. Keep your hands away remote positive (+) terminal if the from moving parts once the engine is vehicle has one.
Page 436 8. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. The other end of the negative (−) cable does not go to the dead battery.
Page 437 Notice: If the jumper cables are connected or To disconnect the jumper cables from both removed in the wrong order, electrical shorting vehicles, do the following: may occur and damage the vehicle. The repairs 1. Disconnect the black negative (−) cable from would not be covered by your warranty.
Page 438: All-Wheel Drive
All-Wheel Drive Add enough lubricant to raise the level to the bottom of the ﬁller plug hole. Use care not to overtighten the plug. When to Check Lubricant It is not necessary to regularly check ﬂuid unless What to Use you suspect there is a leak or you hear an To determine what kind of lubricant to use, see unusual noise.
Page 439 How to Check Lubricant What to Use To determine what kind of lubricant to use, see Recommended Fluids and Lubricants on page 529. For vehicles equipped with the SS package, to add lubricant when the level is low, use SAE 75W–90 Synthetic Axle Lubricant (GM Part No.
Page 440: Four-Wheel Drive
Four-Wheel Drive Add enough lubricant to raise the level to the bottom of the ﬁller plug hole. Use care not to overtighten the plug. Transfer Case When to Check Lubricant What to Use It is not necessary to regularly check ﬂuid unless To determine what kind of lubricant to use, see you suspect there is a leak or you hear an Recommended Fluids and Lubricants on page 529.
Page 441 How to Check Lubricant When the differential is cold, add enough lubricant to raise the level to 1/2 inch (12 mm) below the ﬁller plug hole. When the differential is at operating temperature (warm), add enough lubricant to raise the level to the bottom of the ﬁller plug hole.
Page 442: Bulb Replacement
Bulb Replacement Taillamps and Turn Signal Lamps 1. Open the liftgate. See Liftgate/Liftglass For the proper type of replacement bulbs, see on page 104 for more information. Replacement Bulbs on page 444. For any bulb changing procedure not listed in this 2.
Page 443 6. Holding the socket, pull the bulb to release it from the socket. 7. Push the new bulb into the socket until it clicks. 8. Reinstall the socket and tighten the three screws. 9. Reconnect the wiring harness. 10. Reinstall the taillamp assembly by lining up the locator pins with the retainers in the vehicle’s body.
Page 444: License Plate Lamp
License Plate Lamp Replacement Bulbs To replace one of these bulbs, do the following: Exterior Lamp Bulb Number 1. Remove the two screws holding the License Plate Lamp license plate lamp lens. Taillamps 3157 For replacement bulbs not listed here, contact your dealer/retailer.
Page 445 Do not allow the wiper blade arm to touch the 2. Press down on the blade assembly pivot windshield. locking tab. Pull down on the blade assembly to release it from the wiper arm hook. 1. To remove the old wiper blades, lift the wiper arm until it locks into a vertical position.
Page 446 4. To install the new wiper insert, slide the insert (D), notched end last, into the end with two blade claws (A). Slide the insert all A. Claw in Notch the way through the blade claws at the B. Correct Installation opposite end (B).
Page 447 Backglass Wiper Blade Replacement 4. Replace the wiper blade. 5. Return the wiper blade assembly to the park 1. Lift the wiper blade assembly up and out of rest position. the park rest position. 2. Pull the wiper blade assembly away from the backglass.
Page 448: Tires
Tires CAUTION: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever • Underinﬂated tires pose the same have questions about your tire warranty and where danger as overloaded tires. The to obtain service, see your GM Warranty booklet resulting accident could cause serious for details.
Page 449: Winter Tires
Low-Proﬁle Performance Tire Winter Tires (Trailblazer SS) For cold weather driving conditions you may prefer to get tires designed for snow or ice, if your If your vehicle has P255/50R20 size tires, they are vehicle has P255/50R20 size tires. See your classiﬁed as low-proﬁle performance tires.
Page 450: Tire Sidewall Labeling
Tire Sidewall Labeling (A) Tire Size: The tire size code is a combination of letters and numbers used to deﬁne a particular Useful information about a tire is molded into the tire’s width, height, aspect ratio, construction sidewall. The following illustrations are examples type, and service description.
Page 451 (E) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG): Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction, and temperature resistance. For more information, see Uniform Tire Quality Grading on page 469.
Page 452 (B) TPC Spec (Tire Performance Criteria (E) Tire Identiﬁcation Number (TIN): The letters Speciﬁcation): Original equipment tires designed and numbers following DOT code are the Tire to GM’s speciﬁc tire performance criteria have Identiﬁcation Number (TIN). The TIN shows a TPC speciﬁcation code molded onto the sidewall. the manufacturer and plant code, tire size, and GM’s TPC speciﬁcations meet or exceed all date the tire was manufactured.
Page 453: Tire Size
Tire Size (A) Light Truck (LT-Metric) Tire: The United States version of a metric tire sizing system. The following examples show the different parts of The letters LT as the ﬁrst two characters in the a tire size. tire size means a light truck tire engineered to standards set by the U.S.
Page 454: Tire Terminology And Deﬁnitions
Tire Terminology and Deﬁnitions Cold Tire Pressure: The amount of air pressure in a tire, measured in pounds per square Air Pressure: The amount of air inside the tire inch (psi) or kilopascals (kPa) before a tire has pressing outward on each square inch of the built up heat from driving.
Page 455 Intended Outboard Sidewall: The side of an Normal Occupant Weight: The number of asymmetrical tire, that must always face outward occupants a vehicle is designed to seat multiplied when mounted on a vehicle. by 150 lbs (68 kg). See Loading Your Vehicle on page 356.
Page 456 Radial Ply Tire: A pneumatic tire in which the UTQGS (Uniform Tire Quality Grading ply cords that extend to the beads are laid at Standards): A tire information system that 90 degrees to the centerline of the tread. provides consumers with ratings for a tire’s traction, temperature, and treadwear.
Page 457: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure A Tire and Loading Information label is attached to the vehicle’s center pillar (B-pillar), below the Tires need the correct amount of air pressure to driver’s door latch. This label shows your vehicle’s operate effectively. original equipment tires and the correct inﬂation pressures for your tires when they are cold.
Page 458: High-Speed Operation
How to Check High-Speed Operation Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are CAUTION: properly inﬂated simply by looking at them. Radial tires may look properly inﬂated even when Driving at high speeds, 100 mph (160 km/h) they’re underinﬂated.
Page 459: Tire Pressure Monitor System
If your vehicle has P255/50R20 104V size tires The inﬂation pressure for the front tires should be installed on the rear axle, they will require set to the cold tire inﬂation pressure shown on inﬂation pressure adjustment when driving your the Tire and Loading Information label.
Page 460 When a low tire pressure condition is detected, (If your vehicle has tires of a different size than the TPMS will illuminate the low tire pressure the size indicated on the vehicle placard or tire warning symbol located on the instrument panel inﬂation pressure label, you should determine the cluster, and at the same time a message will also proper tire inﬂation pressure for those tires.)
Page 461 Please note that the TPMS is not a substitute for from functioning properly. Always check the TPMS proper tire maintenance, and it is the driver’s malfunction telltale after replacing one or more responsibility to maintain correct tire pressure, tires or wheels on your vehicle to ensure that the even if under-inﬂation has not reached the level replacement or alternate tires and wheels allow to trigger illumination of the TPMS low tire...
Page 462 TPMS Sensor Identiﬁcation Codes You will have two minutes to match the ﬁrst tire/wheel position, and ﬁve minutes overall to Each TPMS sensor has a unique identiﬁcation match all four tire/wheel positions. If it takes longer code. Any time you replace one or more of than two minutes, to match the ﬁrst tire and wheel, the TPMS sensors or rotate the vehicle’s tires, or more than ﬁve minutes to match all four tire...
Page 463 4. Start with the driver’s side front tire. 9. After hearing the conﬁrming horn chirp for the driver’s side rear tire, check to see if the 5. Remove the valve cap from the valve cap TPMS warning light is still ﬂashing. If yes, stem.
Page 464: Tire Inspection And Rotation
Federal Communications Commission Tire Inspection and Rotation (FCC) and Industry and Science Canada Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). The Tire Pressure Monitor System (TPMS) operates on a radio frequency and complies with Any time you notice unusual wear, rotate your Part 15 of the FCC Rules.
Page 465 Make certain that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Speciﬁcations on page 513. CAUTION: Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time.
Page 466: When It Is Time For New Tires
When It Is Time for New Tires Buying New Tires GM has developed and matched speciﬁc tires for One way to tell when it your vehicle. The original equipment tires is time for new tires is installed on your vehicle, when it was new, to check the treadwear were designed to meet General Motors Tire indicators, which will...
Page 467 If you must replace your vehicle’s tires with those that do not have a TPC Spec number, make CAUTION: sure they are the same size, load range, speed rating, and construction type (radial and Mixing tires could cause you to lose bias-belted tires) as your vehicle’s original tires.
Page 468: Different Size Tires And Wheels
Different Size Tires and Wheels CAUTION: If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, If you add different sized wheels, your including its braking, ride and handling vehicle may not provide an acceptable characteristics, stability, and resistance to rollover.
Page 469: Uniform Tire Quality Grading
Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating Quality grades can be found where applicable on based on the wear rate of the tire when tested the tire sidewall between tread shoulder and under controlled conditions on a speciﬁed maximum section width.
Page 470: Wheel Alignment And Tire Balance
Temperature – A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, The tires and wheels on your vehicle were aligned and C, representing the tire’s resistance to and balanced carefully at the factory to give you the the generation of heat and its ability to dissipate longest tire life and best overall performance.
Page 471 Your dealer/retailer will know the kind of wheel Notice: The wrong wheel can also cause you need. problems with bearing life, brake cooling, speedometer or odometer calibration, Each new wheel should have the same headlamp aim, bumper height, vehicle ground load-carrying capacity, diameter, width, offset and clearance, and tire or tire chain clearance be mounted the same way as the one it replaces.
Page 472: Tire Chains
Tire Chains Accessory Inﬂator Your vehicle may have an accessory inﬂator system. You can inﬂate things like basketballs and CAUTION: bicycle tires. You can also use it to bring your tire pressure up to the proper pressure. It is not Do not use tire chains.
Page 473 To use the accessory inﬂator, do the following: The indicator light will then begin to ﬂash. When the indicator is off, the inﬂator can be 1. Attach the appropriate nozzle adapter started again by pressing the switch. If the to the end of the hose, if required. compressor is still hot, it may only run for a short time before shutting off again.
Page 474: If A Tire Goes Flat
If a Tire Goes Flat CAUTION: It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is Lifting a vehicle and getting under it to do much more likely to leak out slowly.
Page 475 When your vehicle has a ﬂat tire, use the following example as a guide to assist you in the placement CAUTION: of wheel blocks. Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall on you or other people.
Page 476: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools The tools you will be using include the wheel wrench (A), wheel blocks (B), extension(s) (socket end) (C), handle (jack end) (D), and jack (E). The following instructions explain how to remove The jacking equipment needed to remove the the underbody-mounted spare underneath spare tire is stored under the rear seat.
Page 477 A. Wheel Wrench 3. Insert the socket end of the B. Hoist Shaft extension (C) on a C. Extension 45 degree angle D. Retainer downward into the hoist drive E. Spare or Flat Tire shaft hole. (Valve Stem Pointed Up) It is exposed when the rear gate is open and is just above the rear bumper.
Page 478 5. Tilt the retainer at the end of the cable when 4. Turn the wheel wrench counterclockwise to the tire has been completely lowered, and pull lower the spare tire. Keep turning the wheel it through the wheel opening. wrench until the spare tire can be pulled out from under the vehicle.
Page 479: Removing The Flat Tire And Installing The Spare Tire
Removing the Flat Tire and Installing the Spare Tire 1. It is recommended that a safety check is done before preceding. See Changing a Flat Tire on page 474 for more information. 2. Using the wheel wrench, loosen all the wheel nuts. Do not remove Front Position Rear Position...
Page 480 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: 6.
Page 481 7. Remove all the wheel nuts and take CAUTION: (Continued) off the ﬂat tire. In an emergency, a cloth or a paper towel can be used to do this; but be sure to use a scraper or wire brush later, if needed, to get all the rust or dirt off.
Page 482 CAUTION: Never use oil or grease on studs or nuts. Because the nuts might come loose. The vehicle’s wheel could fall off, causing a serious accident. 10. Put the nuts on by hand. Make sure the rounded end is toward the wheel. 11.
Page 483 Notice: Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. CAUTION: To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence Incorrect wheel nuts or improperly and to the proper torque speciﬁcation. tightened wheel nuts can cause the See Capacities and Speciﬁcations on page 513 for the wheel nut torque speciﬁcation.
Page 484: Secondary Latch System
Secondary Latch System CAUTION: Your vehicle has an underbody-mounted tire hoist assembly equipped with a secondary latch system. It is designed to stop the spare tire from Before beginning this procedure read all suddenly falling off your vehicle if the cable holding the instructions.
Page 485 To release the spare tire from the secondary latch, 5. Turn the wrench counterclockwise until do the following: approximately 6 inches (15 cm) of cable is exposed. 1. Check under the vehicle to see if the cable is visible. If it is not visible, proceed to Step 6.
Page 486 7. Turn the wrench clockwise to raise the jack 11. If the spare tire is until it lifts the end ﬁtting. hanging from the cable, insert 8. Continue raising the jack until the spare tire the socket end of stops moving upward and is held ﬁrmly in the extension place.
Page 487 Notice: If you drive away before the spare tire or secondary latch system cable has been reinstalled, you could damage your vehicle. Always reinstall this cable before driving your vehicle. 14. Turn the wheel wrench clockwise to raise the cable back up if the cable is hanging under the vehicle.
Page 488: Storing A Flat Or Spare Tire And Tools
Storing a Flat or Spare Tire CAUTION: and Tools The underbody-mounted spare tire needs CAUTION: to be stored with the valve stem pointing up. If the spare tire is stored with the valve stem pointing downward, its Storing a jack, a tire, or other equipment secondary latch will not work properly in the passenger compartment of the and the spare tire could loosen and...
Page 489 Notice: An aluminum wheel with a ﬂat tire 1. Put the tire (E) on the ground at the rear of should always be stored under the vehicle with the vehicle. the hoist. However, storing it that way for an 2. Remove the hubcap, if the vehicle has one, extended period could damage the wheel.
Page 490 A. Handle D. Extension(s) 7. Make sure the tire is stored securely. Push, B. Wheel Wrench E. Knob pull (A), and then try to turn (B) the tire. C. Instruction Label F. Wheel Blocks and Jack If the tire moves, use the wheel wrench and socket end of the extension to tighten 1.
Page 491: Spare Tire
Spare Tire Appearance Care Your vehicle, when new, had a fully-inﬂated Cleaning the Inside of Your Vehicle spare tire. A spare tire may lose air over time, so check its inﬂation pressure regularly. Your vehicle’s interior will continue to look its See Inﬂation - Tire Pressure on page 457 and best if it is cleaned often.
Page 492 Remove any accidental over-spray from other Do not clean your vehicle using the following surfaces immediately. To prevent over-spray, cleaners or techniques: apply cleaner directly to the cleaning cloth. • Never use a knife or any other sharp object to remove a soil from any interior surface.
Page 493: Fabric/Carpet
Fabric/Carpet 3. Start on the outside edge of the soil and gently rub toward the center. Continue Use a vacuum cleaner with a soft brush cleaning, using a clean area of the cloth each attachment frequently to remove dust and loose time it becomes soiled.
Page 494: Leather
Leather Instrument Panel, Vinyl, and Other Plastic Surfaces A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is A soft cloth dampened with water may be used to necessary, a soft cloth dampened with a mild soap remove dust.
Page 495: Care Of Safety Belts
Care of Safety Belts Washing Your Vehicle Keep belts clean and dry. The paint ﬁnish on the vehicle provides beauty, depth of color, gloss retention, and durability. The best way to preserve the vehicle’s ﬁnish is to CAUTION: keep it clean by washing it often with lukewarm or cold water.
Page 496: Cleaning Exterior Lamps/Lenses
Cleaning Exterior Lamps/Lenses Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint Use only lukewarm or cold water, a soft cloth and ﬁnish may damage it. Use only non-abrasive a car washing soap to clean exterior lamps waxes and polishes that are made for a and lenses.
Page 497: Windshield, Backglass, And Wiper Blades
Protecting Exterior Bright Metal Parts Windshield, Backglass, and Wiper Blades Bright metal parts should be cleaned regularly to keep their luster. Washing with water is all Clean the outside of the windshield and backglass that is usually needed. However, you may use with glass cleaner.
Page 498: Aluminum Wheels
Aluminum Wheels Notice: If you drive your vehicle through an automatic car wash that has silicone carbide Notice: If you use strong soaps, chemicals, tire cleaning brushes, you could damage abrasive polishes, cleaners, brushes, or the aluminum or chrome-plated wheels. cleaners that contain acid on aluminum or The repairs would not be covered by your chrome-plated wheels, you could damage the...
Page 499: Finish Damage
Finish Damage At least every spring, ﬂush these materials from the underbody with plain water. Clean any Any stone chips, fractures or deep scratches in areas where mud and debris can collect. the ﬁnish should be repaired right away. Bare Dirt packed in close areas of the frame should be metal will corrode quickly and may develop into loosened before being ﬂushed.
Page 500: Vehicle Care/Appearance Materials
Vehicle Care/Appearance Materials Description Usage Removes swirl marks, ﬁne Description Usage Swirl Remover Polish scratches, and other light surface contamination. Polishing Cloth Interior and exterior Wax-Treated polishing cloth. Removes light scratches Cleaner Wax and protects ﬁnish. Tar and Road Removes tar, road oil, Oil Remover and asphalt.
Page 501: Vehicle Identiﬁcation
Vehicle Identiﬁcation Engine Identiﬁcation The eighth character in the VIN is the engine code. This code helps you identify your vehicle’s Vehicle Identiﬁcation Number (VIN) engine, speciﬁcations, and replacement parts. Service Parts Identiﬁcation Label This label is on the inside of the glove box. It is very helpful if you ever need to order parts.
Page 502: Electrical System
Electrical System Headlamps The headlamp wiring is protected by four fuses. Add-On Electrical Equipment An electrical overload will cause a lamp to go on and off. If this happens, have your headlamp Notice: Do not add anything electrical to your wiring checked right away.
Page 503: Fuses And Circuit Breakers
Fuses and Circuit Breakers Engine Compartment Fuse Block The wiring circuits in your vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of ﬁres caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse.
Page 504 L6 Engine Fuses Usage Fuses Usage Electrically-Controlled Air Passenger’s Side Low-Beam Suspension Headlamp Passenger’s Side High-Beam Back-Up Trailer Lamps Headlamp...
Page 505 Fuses Usage Fuses Usage Driver’s Side High-Beam Headlamp Horn Driver’s Side Low-Beam Headlamp Ignition E Windshield Wiper Electronic Throttle Control Automatic Transfer Case Instrument Panel Cluster, Driver Information Center Windshield Washer Automatic Shift Lock Control Powertrain Control Module B System Fog Lamps Transmission Control Module (TCM) Canister...
Page 506 Fuses Usage Relays Usage Ignition B Windshield Washer Passenger’s Side Trailer Turn High-Beam Headlamp Driver’s Side Trailer Turn Air Conditioning Hazard Flashers Cooling Fan Headlamp Driver Module Headlamp Driver Module Air Injection Reactor (AIR) Solenoid Starter Air Injection Reactor (AIR) Pump Electric Adjustable Pedal Vehicle Stability Enhancement ®...
Page 507 V8 Engine Fuses Usage Fuses Usage Electrically-Controlled Air Passenger’s Side Low-Beam Suspension Headlamp Passenger’s Side High-Beam Back-Up-Trailer Lamps Headlamp...
Page 508 Fuses Usage Fuses Usage Driver’s Side High-Beam Headlamp Instrument Panel Cluster, Driver Information Center Driver’s Side Low-Beam Headlamp Automatic Shift Lock Control Windshield Wiper System Automatic Transfer Case Engine 1 Windshield Washer Backup Powertrain Control Module B Powertrain Control Module 1 Fog Lamps Powertrain Control Module Stoplamp...
Page 509: Rear Underseat Fuse Block
Fuses Usage Relays Usage Starter Oxygen Sensor Bank A Electric Adjustable Pedal Injector Bank B Powertrain Headlamp Driver Module Body Controller 1 Miscellaneous Usage Electric Adjustable Pedal Instrument Panel Battery Vehicle Stability Enhancement ® System (StabiliTrak Rear Underseat Fuse Block Regulated Voltage Control Relays Usage...
Page 510 Fuses Usage Fuses Usage Passenger Door Control Module Liftgate Module 2 Driver Door Control Module Truck Body Controller 3...
Page 511 Fuses Usage Fuses Usage Rear Fog Lamps Blank Blank Lock Truck Body Controller 2 Blank Power Seats Unlock Rear Wiper Blank Driver Door Module Blank ® Ampliﬁer OnStar Overhead Battery, ® OnStar System Passenger Door Module Sunroof Rear Climate Controls Not Used Driver Side Rear Parking Lamps Parking Lamps...
Page 512 Fuses Usage Fuses Usage Heat Ventilation Air Rear Fog Lamps Conditioning B Auxiliary Power 1 Front Parking Lamps Ignition 0 Driver Side Turn Signal Four-Wheel Drive Heat Ventilation Air Blank Conditioning 1 Truck Body Controller Ignition Truck Body Controller 4 Brakes Radio Truck Body Controller Run...
Page 513: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 529 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge amount, see the refrigerant caution label located Air Conditioning Refrigerant R134a under the hood.
Page 514 Capacities Application English Metric Transfer Case Lubricant 2.0 qt 1.8 L Transmission (Drain and Reﬁll) 5.0 qt 4.7 L 140 Y Wheel Nut Torque 100 lb ft All capacities are approximate. When adding, be sure to ﬁll to the appropriate level, as recommended in this manual.
Page 515: Maintenance Schedule
Section 6 Maintenance Schedule Maintenance Schedule ........ 516 Owner Checks and Services ..... 525 Introduction ..........516 At Each Fuel Fill ........525 Maintenance Requirements ......516 At Least Once a Month ......526 Your Vehicle and the Environment .... 517 At Least Once a Year .......
Page 516: Maintenance Schedule
Maintenance Schedule Maintenance Requirements Notice: Maintenance intervals, checks, Introduction inspections, replacement parts, and recommended ﬂuids and lubricants as Important: Keep engine oil at the proper level prescribed in this manual are necessary to and change as recommended. keep your vehicle in good working condition. Any damage caused by failure to follow scheduled maintenance might not be covered by warranty.
Page 517: Your Vehicle And The Environment
Your Vehicle and the Environment Using the Maintenance Schedule Proper vehicle maintenance not only helps to keep We at General Motors want to help you keep your your vehicle in good working condition, but also vehicle in good working condition. But we do helps the environment.
Page 518 This schedule is for vehicles that: • CAUTION: carry passengers and cargo within recommended limits. You will ﬁnd these limits on the Tire and Loading Information label. Performing maintenance work on a See Loading Your Vehicle on page 356. vehicle can be dangerous. In trying to do •...
Page 519: Scheduled Maintenance
® Scheduled Maintenance When you go to your GM Goodwrench dealer for your service needs, you will know that GM-trained When the change engine oil light or CHANGE and supported service technicians will perform ENGINE OIL DIC message comes on, it means the work using genuine GM parts.
Page 520 When the change engine oil light or CHANGE Maintenance I — Use Maintenance I if the light ENGINE OIL DIC message appears, certain or message comes on within 10 months since services, checks, and inspections are required. the vehicle was purchased or Maintenance II was Required services are described in the following performed.
Page 521 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and ﬁlter. See Engine Oil on page 402. Reset oil life system. • • See Engine Oil Life System on page 408. An Emission Control Service. • • Visually check for any leaks or damage. See footnote (j). Inspect engine air cleaner ﬁlter.
Page 522: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000)
Page 523: Maintenance Footnotes
Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000) (200 000) (240 000) Engine cooling system service (or every ﬁve years, whichever occurs • ﬁrst). An Emission Control Service. See footnote (i).
Page 524 (e) Make sure the safety belt reminder light and all (h) Change automatic transmission ﬂuid and ﬁlter your belts, buckles, latch plates, retractors, and if the vehicle is mainly driven under one or anchorages are working properly. Look for more of these conditions: any other loose or damaged safety belt system −...
Page 525: Owner Checks And Services
Owner Checks and Services Engine Oil Level Check Check the engine oil level and add the proper oil if These owner checks and services should be necessary. See Engine Oil on page 402 for performed at the intervals speciﬁed to help ensure further details.
Page 526: At Least Once A Month
At Least Once a Month At Least Once a Year Tire Inﬂation Check Starter Switch Check Inspect your vehicle’s tires and make sure they are inﬂated to the correct pressures. Do not forget CAUTION: to check the spare tire. See Inﬂation - Tire Pressure on page 457.
Page 527 Automatic Transmission Shift Lock Ignition Transmission Lock Check Control System Check While parked, and with the parking brake set, try to turn the ignition to LOCK in each shift lever position. CAUTION: • The ignition should turn to LOCK only when the shift lever is in PARK (P).
Page 528 Parking Brake and Automatic Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular Transmission Park (P) Mechanism Check brake, set the parking brake. • To check the parking brake’s holding CAUTION: ability: With the engine running and transmission in NEUTRAL (N), slowly remove foot pressure from the regular brake pedal.
Page 529: Recommended Fluids And Lubricants
Recommended Fluids and Usage Fluid/Lubricant Lubricants The engine requires a special engine oil meeting GM Standard Fluids and lubricants identiﬁed below by name, GM4718M. Oils meeting this standard can be identiﬁed as part number, or speciﬁcation can be obtained from synthetic, and should also be your dealer/retailer.
Page 530 Usage Fluid/Lubricant Usage Fluid/Lubricant ® Hydraulic Brake Delco Supreme 11 Brake Fluid or SAE 75W-90 Synthetic System equivalent DOT-3 brake ﬂuid. Axle Lubricant (GM Part Front Axle No. U.S. 12378261, in Windshield Canada 10953455) meeting ® GM Optikleen Washer Solvent. Washer GM Speciﬁcation 9986115.
Page 531 Usage Fluid/Lubricant Usage Fluid/Lubricant Chassis Lubricant Hood and Door Rear Driveline (GM Part No. U.S. 12377985, in Hinges, Body Center Spline Canada 88901242) or lubricant Door Hinge and Universal meeting requirements of NLGI #2, Pins, Liftgate Multi-Purpose Lubricant, Superlube Joints Category LB or GC-LB.
Page 532: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your dealer. ® Part GM Part Number ACDelco Part Number Automatic Transmission Filter Kit 24208576 TF337 Engine Air Cleaner/Filter 15036141 A2014C Engine Oil Filter 4.2 L6 89017342 PF61...
Page 533: Engine Drive Belt Routing
Engine Drive Belt Routing 5.3L V8 and 6.0L V8 Engines 4.2L V6 Engine...
Page 534: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 516. Any additional information from Owner Checks and Services on page 525 can be added on the following record pages.
Page 535 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 536 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 537: Customer Assistance Information
Section 7 Customer Assistance Information Customer Assistance and Information ..538 Reporting Safety Defects to the Customer Satisfaction Procedure ....538 Canadian Government ......553 Online Owner Center ......... 541 Reporting Safety Defects to Customer Assistance for Text General Motors ........553 Telephone (TTY) Users ......
Page 538: Customer Assistance And Information
STEP TWO: If after contacting a member of dealership management, it appears your concern Information cannot be resolved by the dealership without further help, in the U.S., contact the Chevrolet Customer Assistance Center by calling Customer Satisfaction Procedure 1-800-222-1020. In Canada, contact General...
Page 539 STEP THREE — U.S. Owners: Both General You may contact the BBB Auto Line Program Motors and your dealer are committed to making using the toll-free telephone number or write them sure you are completely satisﬁed with your at the following address: new vehicle.
Page 540 STEP THREE — Canadian Owners: In the event For further information concerning eligibility in the that you do not feel your concerns have been Canadian Motor Vehicle Arbitration Plan addressed after following the procedure outlined in (CAMVAP), call toll-free 1-800-207-0685. Steps 1 and 2, General Motors of Canada Alternatively, you may call the General Motors Limited wants you to be aware of its participation...
Page 541: Online Owner Center
Online Owner Center My GM Canada (Canada only) My GM Canada is a password-protected section Online Owner Center (United of gmcanada.com where you can save information States only) on GM vehicles, get personalized offers, and use handy tools and forms with greater ease. The Owner Center is a resource for your GM ownership needs.
Page 542: Customer Assistance For Text
Chevrolet encourages customers to call the Customer Communication Centre, CA1-163-005 toll-free number for assistance. However, if a 1908 Colonel Sam Drive customer wishes to write or e-mail Chevrolet, the Oshawa, Ontario L1H 8P7 letter should be addressed to: www.gmcanada.com 1-800-263-3777 (English) United States —...
Page 543: Gm Mobility Reimbursement Program
Mexico, Central America and GM Mobility Reimbursement Caribbean Islands/Countries Program (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 Col. Lomas de Bezares C.P.
Page 544: Roadside Assistance Program
Canada, the vehicle registration is also a year. required. Lock-out service will be covered at As the owner of a new Chevrolet vehicle, you are no charge if you are unable to gain entry automatically enrolled in the Chevrolet Roadside into your vehicle.
Page 545 (Canada only): In the event of a warranty In many instances, mechanical failures are related vehicle disablement, while en route and covered under Chevrolet’s Bumper-to-Bumper over 250 kilometres from original point of warranty, and the duration of the Base Warranty...
Page 546: Courtesy Transportation
1-888-889-2438, Canadian customers Courtesy Transportation, a customer support call 1-800-268-6800. program for new vehicles. Chevrolet and General Motors of Canada Limited For warranty repairs during the Bumper-to-Bumper reserve the right to limit services or reimbursement (U.S.) or Base Warranty Coverage period...
Page 547 Several courtesy transportation options are If the dealer requests that you simply drop the available to assist in reducing your inconvenience vehicle off for service, you are urged to do so as when warranty repairs are required. early in the work day as possible to allow for the same day repair.
Page 548 Public Transportation or Fuel may include minimum age requirements, insurance coverage, credit card, etc. You are responsible Reimbursement for fuel usage charges and may also be If your vehicle requires overnight warranty repairs, responsible for taxes, levies, usage fees, and public transportation is used as ‘shuttle excessive mileage, or rental usage beyond the service,’...
Page 549: Collision Damage Repair
Collision Damage Repair originally designed appearance and safety performance, however, the history of these parts If your vehicle is involved in a collision and it is is not known. Such parts are not covered by damaged, have the damage repaired by a qualiﬁed your GM New Vehicle Limited Warranty, and any technician using the proper equipment and related failures are not covered by that warranty.
Page 550 Insuring Your Vehicle If an Accident Occurs Protect your investment in your GM vehicle with Here is what to do if you are involved in an comprehensive and collision insurance coverage. accident. There are signiﬁcant differences in the quality • Try to relax and then check to make sure you of coverage afforded by various insurance policy are all right.
Page 551 • • If your vehicle cannot be driven, know where If possible, call your insurance company from the towing service will be taking it. Get a the scene of the accident. They will walk you card from the tow truck operator or write down through the information they will need.
Page 552: Reporting Safety Defects
Managing the Vehicle Damage Repair have no contractual limits with that company. In such cases, you can have control of the repair and Process parts choices as long as cost stays within In the event that your vehicle requires damage reasonable limits.
Page 553: Reporting Safety Defects To The Canadian Government
Administrator, NHTSA 400 Seventh Street, SW. you will notify General Motors. Please call the Washington, D.C. 20590 Chevrolet Customer Assistance Center at 1-800-222-1020, or write: You can also obtain other information about motor vehicle safety from http://www.safercar.gov. Chevrolet Motor Division Chevrolet Customer Assistance Center P.O.
Page 554: Service Publications Ordering
Service Publications Ordering (1-800-463-7483). This reference number is needed to order the service bulletin from Information Helm, Inc. Service Manuals RETAIL SELL PRICE: $6.00 US + Processing Fee Owner Information Service Manuals have the diagnosis and repair information on engines, transmission, axle Owner publications are written speciﬁcally for suspension, brakes, electrical, steering, body, etc.
Page 555: Vehicle Data Recording And Privacy
ORDER TOLL FREE: 1-800-551-4123 Vehicle Data Recording and Monday-Friday 8:00 AM - 6:00 PM Privacy Eastern Time Your GM vehicle has a number of sophisticated For Credit Card Orders Only computers that record information about the (VISA-MasterCard-Discover), visit Helm, Inc. on vehicle’s performance and how it is driven.
Page 556: Event Data Recorders
Event Data Recorders To retrieve this data, special equipment and access to the vehicle or the module that stores the Some information about your vehicle’s data are required. Certain data may also be performance and how it is driven may be recorded ®...
Page 557: Onstar
OnStar Radio Frequency Identiﬁcation (RFID) ® If your vehicle has OnStar and you subscribe to ® the OnStar services, please refer to the RFID technology is used in some vehicles for ® OnStar Terms and Conditions for information on functions such as tire pressure monitoring ®...
Page 558 ✍ NOTES...
Page 559 Airbag Systems (cont.) All-Wheel Drive ........... 438 Accessories and Modiﬁcations ..... 386 All-Wheel-Drive (AWD) System ....318 Adding a Snow Plow or Similar Equipment ..362 Antenna, Fixed Mast ........303 Adding Equipment to Your Airbag-Equipped Antenna, XM™ Satellite Radio Antenna Vehicle ............
Page 560 Appearance Care (cont.) Windshield, Backglass, and Wiper Battery ............431 Blades ..........497 Electric Power Management ..... 185 Ashtray ............187 Run-Down Protection ....... 186 Audio System ..........238 Before Leaving on a Long Trip ....346 Audio Steering Wheel Controls ....300 Brake Care of Your CD and DVD Player ....
Page 561 Child Restraints (cont.) Lower Anchors and Tethers for Children ..53 Calibration ......133, 135, 138, 140 Older Children ........... 41 California Fuel ..........389 Securing a Child Restraint in a Rear California Proposition 65 Warning ....386 Outside Seat Position ......61 Canadian Owners ...........
Page 562 Cleaning (cont.) Customer Assistance Information (cont.) Climate Control System GM Mobility Reimbursement Program ..543 Dual ............187 Reporting Safety Defects to General Dual Automatic ......... 190 Motors ..........553 Outlet Adjustment ........195 Reporting Safety Defects to the Rear ............196 Canadian Government ......
Page 563 Driver Position, Safety Belt ........25 EDR ............555 Driver Information Center (DIC) ....220 Electrical System DIC Operation and Displays ..... 221 Add-On Equipment ........502 DIC Vehicle Customization ....... 231 Engine Compartment Fuse Block ..... 503 DIC Warnings and Messages ....224 Fuses and Circuit Breakers ......
Page 564 Engine (cont.) Fog Lamp Overheating ..........418 Fog ............183 Reduced Power Light ....... 217 Four-Wheel Drive ....... 121, 440 Running While Parked ......131 Front Axle ........... 440 Starting ............ 113 Fuel ............388 Entry Lighting ..........184 Additives ..........389 Event Data Recorders .........
Page 565 Headlamps (cont.) High/Low Beam Changer ......175 Gage On Reminder ........... 181 Check Gages Warning Light ..... 218 Heated Seats ..........11 Engine Coolant Temperature ....211 Heater ............187 Fuel ............219 Heater ............190 Oil Pressure ..........215 Highbeam On Light ........
Page 566 Light (cont.) Check Gages Warning ......218 Jump Starting ..........432 Check Gas Cap ........219 Cruise Control .......... 217 Gate Ajar ..........218 Highbeam On .......... 217 Keyless Entry System ........95 Low Fuel Warning ........219 Keys ............. 93 Malfunction Indicator ........
Page 567 Locks Maintenance Schedule (cont.) Delayed Locking ........100 Recommended Fluids and Lubricants ..529 Door ............98 Scheduled Maintenance ......519 Lockout Protection ........103 Using ............517 Power Door ..........99 Your Vehicle and the Environment .... 517 Programmable Automatic Door Locks ..100 Malfunction Indicator Light ......
Page 568 ® ® Mirrors (cont.) OnStar System, see OnStar Manual ..145 Outside Power Mirrors ......143 Operation, Universal Home MP3 ............274 Remote System ......150, 154 MyGMLink.com ..........541 Other Warning Devices ........ 172 Outlet Adjustment ........195 Outlets Accessory Power ........
Page 569 Passenger Sensing System ......80 Passing ............321 Radiator Pressure Cap ........ 418 ® Passlock ............ 110 Radio Frequency Identiﬁcation (RFID), Power Privacy ............. 557 Door Locks ..........99 Radios ............238 Electrical System ........502 Care of Your CD and DVD Player .... 302 Lumbar Controls ........
Page 570 Rear Windshield Washer/Wiper ....176 Reporting Safety Defects (cont.) Rearview Mirror, Automatic Dimming United States Government ....... 552 with Compass .......... 138 Restraint System Check Rearview Mirror, Automatic Dimming with Checking the Restraint Systems ....88 Compass and Temperature Display ..140 Replacing Restraint System Parts Rearview Mirror, Automatic Dimming with After a Crash .........
Page 571 Safety Belts (cont.) Service (cont.) Rear Seat Passengers ....... 34 California Proposition 65 Warning ..... 386 Right Front Passenger Position ....34 Doing Your Own Work ......387 Safety Belt Extender ........40 Engine Soon Light ........212 Safety Belt Use During Pregnancy ..... 33 Four-Wheel-Drive Warning Light ....
Page 572 Storage Areas Tires ............448 Center Console Storage Area ....161 Aluminum Wheels, Cleaning ..... 498 Convenience Net ........164 Buying New Tires ........466 Glove Box ..........161 Chains ............. 472 Luggage Carrier ........162 Changing a Flat Tire ........ 474 Overhead Console ........
Page 573 Towing Recreational Vehicle ......... 362 Vehicle Towing a Trailer ........368 Control ............. 310 Your Vehicle ..........362 Damage Warnings ........5 Traction Loading ............ 356 ® StabiliTrak System ......... 313 Symbols ............5 Transmission Vehicle Customization, DIC ......231 Fluid, Automatic ........
Page 574 Wheels Alignment and Tire Balance ..... 470 XM Radio Messages ........280 Different Size ........... 468 XM™ Satellite Radio Antenna System ..303 Replacement ..........470 Where to Put the Restraint ......52 Windows ............. 105 Power ............106 Your Vehicle and the Environment ....517 Windshield Backglass, and Wiper Blades, Cleaning ..

Chevrolet 2007 TrailBlazer Owner's Manua

Section 1 Seats and Restraint Systems

Seats and Restraint Systems

Front Seats

Rear Seats

Safety Belts

Child Restraints

Airbag System

Restraint System Check

Section 2 Features and Controls

Keys

Doors and Locks

Windows

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

Onstar System

Universal Home Remote System

Storage Areas

Sunroof

Section 3 Instrument Panel

Instrument Panel Overview

Climate Controls

Warning Lights, Gages, and Indicators

Driver Information Center (DIC)

Audio System(S)

Section 4 Driving Your Vehicle

Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Section 5 Service and Appearance Care

Service and Appearance Care

Service

Fuel

Checking Things under the Hood

Rear Axle

All-Wheel Drive

Front Axle

Four-Wheel Drive

Bulb Replacement

Windshield Wiper Blade Replacement

Tires

Appearance Care

Vehicle Identiﬁcation

Electrical System

Capacities and Speciﬁcations

Quick Links

Chapters

Related Manuals for Chevrolet 2007 TrailBlazer

Summary of Contents for Chevrolet 2007 TrailBlazer