Chevrolet 2007 Corvette Owner's Manual page 45

2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether anchor,
if equipped. Refer to the child restraint
instructions and the following steps:
2.1. Find the top tether anchor.
2.2. Press the ribbed area of the trim cover
to open the cover and expose the
anchor.
2.3. Route, attach and tighten the top tether
according to your child restraint
instructions and the following
instructions:
If the position you are
using has a fixed head
restraint and you are
using a single tether,
route the tether over
the head restraint.
3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using has a fixed head
restraint and you are
using a dual tether, route
the tether around the
head restraint.
45