Chevrolet 2007 Corvette Owner's Manual page 128

2. Write down the eight to 12 switch settings
from left to right as follows:
•
When a switch is in the up position,
write "Left."
•
When a switch is in the down position,
write "Right."
•
If a switch is set between the up and down
position, write "Middle."
The switch settings that you wrote down in
Step 2 will now become the button strokes
you enter into the Universal Home Remote in
Step 4. Be sure to enter the switch settings
that you wrote down in Step 2, in order from
left to right, into the Universal Home Remote,
when completing Step 4.
3. From inside your vehicle, first firmly press
all three buttons at the same time for about
three seconds. Release the buttons to put
the Universal Home Remote into
programming mode.
128
4. The indicator lights will blink slowly. Enter
each switch setting from Step 2 into your
vehicle's Universal Home Remote. You will
have two and one-half minutes to complete
Step 4. Now press one button on the Universal
Home Remote for each switch setting as
follows:
•
If you wrote "Left," press the left button in
the vehicle.
•
If you wrote "Right," press the right button
in the vehicle.
•
If you wrote "Middle," press the middle
button in the vehicle.