Table of Contents
Advertisement
User partition configuration:
The system must be disarmed before accessing user configuration.
Do not remove all partitions from a users partition control. Use extreme caution
when modifying a user with master code authority.
The system must be disarmed before accessing user configuration.
Do not remove all partitions from a users partition control. Use extreme caution
when modifying a user with master code authority.
User Authority –
Configuration
How to: Configure User Authority
Step
Example
Change user 6 to a master code.
1.
[PIN] Call the NX-595E via an offsite touch-tone phone to begin the session.
Press [0] for system configuration menu.
2.
Press [1] for user configuration menu.
Press [3] for user authority configuration.
3.
Select a user number followed by # (e.g., User 6.)
Press the option number (from 1 ~ 8) to change selection (e.g, option 4 =
Master code.)
4.
Refer to Table 1 below for complete list of selectable user authority options.
st
1
nd
2
5.
rd
3
# Disconnects session.
Table 1: User Authority Options Selection Table
1
Reserved
2
Arm Only
3
Arm only after close window
4
Master code authority
NX-595E User Manual
star, moves back to user configuration menu.
star, moves back to system configuration menu.
star, moves back to main menu.
5
6
7
8
Arm/disarm code
Allowed to bypass zones
User code will send open, close reports
Must not be selected
31
Advertisement
Table of Contents
