Table of Contents
Advertisement
Main Menu Explained
System Status
Press [1] to hear the current status of the security system. Please refer to table
on page 53 & 54 for a complete list of system status messages.
System Control
Press [2] to access the System Control menu, this menu allows easy everyday
operation of the security system, from arming and disarming individual or multi
partition systems to bypassing (isolating / excluding) individual zones as
required. The internal 185 event log is also accessed from this menu.
- Security System Status – Refer to status message table on page 53 &
54
- Partition Control – This is where partitions are armed / disarmed (turned
on / off) from either the away or stay modes
- To Control Zone Bypass – This is where zone/s are isolated (disabled)
and removed from the security systems arming cycle
- Event History – This is where the last alarm can be viewed, or the last
185 events, which are stored in the panel's internal log
- To move back to the main menu
Intercom Control
Press [3] to access intercom control. An intercom call can be initiated from any
external touch-tone phone and a connection established with the outdoor station,
individual NX-181xx Voice keypads or all NX-181xx Voice keypads. Two-way
communication is "voice switching", only one person may speak at any time and
the caller has priority. Switching between caller and called parties is automatic,
and is controlled by silence on the caller's microphone.
- To commence listen in mode – Allows for a remote user to connect and
listen in to front door stations / NX-181xx Voice keypads.
- To commence two-way communication mode – Allows for a remote
user to connect and engage in a two-way voice call with a front door stations /
NX-181xx Voice keypads.
- To move back to the main menu
Output Control
Your security system is supplied with two outputs, and can be configured to
control up to a total of 16 outputs. These outputs can be used for a variety of
applications, such as Intercom door release, external lighting control, electric
shutter control or even garage door control. As additional equipment is required
NX-595E User Manual
15
Advertisement
Table of Contents
