Table of Contents
Advertisement
Menu 2 - System Control
2.1 Security System Status
2.2 Partition Control
2.3 To Control Zone Bypass
2.4 Event History
Partition Control – Single Partition
Disarming: To turn your security system Off, from either the Away or Stay arming
modes.
Away Arming: To turn your security system On when you are leaving the
premises
Stay Arming: To turn your security system on when you are staying in the
premises, this will automatically bypass pre programmed zones and arm others.
Mainly utilized for arming just the perimeter of the premises.
Disarm – Single partition system
How to: Disarm a single partition system
Step
Example:
Disarming
1.
[PIN]
Call the NX-595E via an offsite touch-tone phone to begin the session.
Press [2] for system control menu.
2.
Press [2] for partition control menu.
Press [1] to turn off.
st
1
3.
2nd star, moves back to main menu.
# Disconnects session.
Away Arm – Single partition system
How to: Away Arm a single partition system
Step
Example:
Away Arm
1.
[PIN]
Call the NX-595E via an offsite touch-tone phone to begin the session.
Press [2] for system control menu.
2.
Press [2] for partition control menu.
Press [2] two to set in the away mode.
st
3.
1
20
2.2.1
To turn off
2.2.2
Away arm
2.2.3
Stay arm
star, moves back to system control menu.
star, moves back to system control menu.
NX-595E User Manual
Advertisement
Table of Contents
