Gateway Solo 1450 Service Manual page 35

11
Place the new spring onto the new latch post, then press the new latch
button into the new latch assembly through the slot in the LCD panel.
Make sure the thickest end of the button is on the right.
12
If you have placed tape onto the spring to help keep it in place, remove
it now.
13
Replace the LCD face plate by lining up the edges and pressing it into
place.
14
Replace the six screws that secure the LCD face plate.
15
Replace the two rounded pads near the hinges, then replace the four flat
pads near the top of the panel.
16
Reassemble your notebook.
www.gateway.com
Replacing the LCD lid latch
31