To Switch The Vacuum Motors On And Off; To Extend And Retract The Vacuum Shoe Pin; To Switch The Scrub Brush Motors On And Off - Clarke Clean Track® L24 56317170 Service Manual

To Switch the Vacuum Motors On and Off

The Vacuum Switch (E) controls the vacuum motors in the Service Test Mode.
• Pressing the Vacuum Switch when both vacuum motors are off switches on the main vacuum motor. The display will
read .
VAC:1
• Pressing the Vacuum Switch a second time shuts off the main vacuum motor. The display will read
• Pressing the Vacuum Switch a third time switches on the auxiliary vacuum motor. The display will read
• Pressing the Vacuum Switch a fourth time shuts off the auxiliary vacuum motor. The display will read
Indicator Function
VAC:OFF Both vacuum motors are off
VAC:1 The main vacuum motor is on.
VAC:2 The auxiliary vacuum motor is on.

To Extend and Retract the Vacuum Shoe Pin

The Wand Switch (G) controls the solenoid that retracts the vacuum shoe pin.
• Pressing the Wand Switch will extend the shoe pin. The display will read SHOE:ON and the vacuum shoes will
extend down with the scrub deck when the deck is lowered.
• Pressing the Wand Switch again will allow the shoe pin to retract. The display will read SHOE:OFF and the vacuum
shoes will remain retracted up when the scrub deck is lowered.
Indicator Function
SHOE:OFF Shoes will not lower with deck.
SHOE:ON Shoes will lower when scrub deck is lowered

To Switch the Scrub Brush Motors On and Off

The Scrub OFF Switch (H) controls the scrub brush motor contactor (K1) to switch the brush motors on and off in the
Service Test Mode.
• Pressing the Scrub OFF Switch with the scrub brush motors off will switch on the motors. The display will read
.
BRUSH:ON
• Pressing the Scrub OFF Switch with the scrub brush motors running will switch off the motors. The display will read
.
BRUSH:OFF
Indicator Function
BRUSH:OFF Both scrub brush motors are off
BRUSH:ON Both scrub brush motors are on
Form No. 56043161 - Clean Track
.
VAC:OFF
.
VAC:2
.
VAC:OFF
L24 - 75
®