Maintenance of the Vacuum Motor Inlet Screens
Figure 12
The two Vacuum Motor Inlet Screens (4) should be
cleaned on a daily basis. DO NOT run water down the
screens in an attempt to clean them. If you do this you
will be running water directly into the vacuum motors.
Remove the Screens (4) from the machine to clean them,
then reinstall.
Spray Nozzle Maintenance
Remove the spray nozzles once a week. Soak the nozzles overnight in a vinegar and water solution to remove any
chemical deposits.
42 - Form No. 56043161 - Clean Track
L24
®