Cable Strain Relief; Placement Of Tx/Rx Units - brace DWG 1000 User Manual

Digital wireless guitar system
Table of Contents

Advertisement

Cable Strain Relief

!
Remove belt clip on Transmitter. Thread cable through the notch in the clip, then
snap the belt clip back onto Transmitter. This will provide strain relief for the cable.
Placement of Tx / Rx Units
Transmitter (Tx / Gray Unit)
Place Tx unit on your hip - on the side of the
guitar neck, or away from the guitar output.
The rounded dome should point away from
your body.
Receiver (Rx / Dark Green Unit)
The RX unit can be placed on the amplifier or
on the stage.
Alternatively you could place the RX unit
as the first device in-line with your stomp boxes.
You'll get the same great performance with the
placement and set-up that works best for you.
Performance may vary depending on location & environment. Not to mention how much you practice...
Rx (Dark Green)
Tx (Gray)
Rx
Alternate
Placement
7

Advertisement

Table of Contents
loading

Table of Contents