brace DWG 1000 User Manual page 15

Digital wireless guitar system
Table of Contents

Advertisement

FCC Notice (United States):
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Notice (Canada):
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
CE Notice (European Notice):
The Conformité Européne symbol found on this product indicates compliance to
the EMC Directive and the Low Voltage Directive of the European council Direc-
tives 1999/519/EC, 2006/95/EC, 2004/108/EC and 1999/5/EC, listed below:
EN 300 328 V1.7.1 (2006-10), EN 301 489-1 V1.8.1 (2008-04), EN 301 489-17
15
V1.3.2 (2008-04), EN 60065:2002 + A1:2006, EN 50392:2004

Advertisement

Table of Contents
loading

Table of Contents