Technical Specifications; Company Contact Information - brace DWG 1000 User Manual

Digital wireless guitar system
Table of Contents

Advertisement

Technical Specifications
Transmitter (Tx)
RF Output Power: 16 dBm
Maximum Input Level: 1V RMS
THD: < 2% @ 800 mV pp 1kHz tone
S/N Ratio: 100 dB
Battery Life: 5 hours (AA size battery)
Input Jack: 1/8" (3.5mm), mono
System Gain: 1:1 (unity)
Receiver (Rx)
Wireless Frequency: 2.4 GHz, FHSS
AC Adapter: 110V-220V - 3V, 500mA
Output Jack: 1/8" (3.5mm), mono

Company Contact Information

• For technical assistance or support, please contact your local dealer or go to
www.braceaudio.com for more information. Don't forget to register your
product on-line too!
made in the USA
Brace Audio
15600 NE 8th St, Suite B1, 287
Bellevue, WA 98008
Wireless Frequency: 2.4 GHz, FHSS
Input Impedance: 600K ohm
Operating Power Voltage: 3.0V Nominal
Audio Frequency Response: 15Hz - 15 kHz
Low Battery Alert: 15 minutes of life left
Antenna: Internal
Tx's per Receiver (one at a time): 12
Battery Life: 7 hours (AA size battery)
Receivers operating at same time: 6
Cables: 1/8" - 1/4"
11

Advertisement

Table of Contents
loading

Table of Contents