What's In The Box; Quick Start - brace DWG 1000 User Manual

What's in the box?

Your DWG-1000 Digital Wireless Guitar System contains:
• 1 - Transmitter (Tx / Gray Unit)
• 1 - Receiver (Rx / Dark Green Unit)
• 1 - AC Adapter (for Rx)
• 2 - 1/4" to 1/8" Guitar Cables
• 2 - Belt Clips
• This User Guide (Duh...)

Quick Start

1) Register your product at http://www.braceaudio.com
2) Use batteries for the Receiver (Rx) or connect the AC Adapter.
3) Plug cable from Receiver (Rx / Dark Green) Audio Out into your
amplifier input. If audio buzz is heard, move the unit to a new location.
4) Plug cable from your guitar into Transmitter (Tx / Gray) Audio In.
5) Each system is a pre-linked pair so there is nothing to do but confirm
that the Link LED lights solid on both the Tx and RX units to show a
successful wireless connection.
6) You are now ready to rock! (Or jazz...)
Plugging the cable into the Tx or Rx units switches the unit on. To save
battery life, unplug the cable to switch the unit off when not in use. Upon
plugging in the cable, the Link LED will pulse steadily while it is waiting to
4
make the wireless connection.