Transmitter (Tx) - brace DWG 1000 User Manual

Transmitter
Transmitter (Tx / Gray Unit)
1. Function Button
Press the Function Button to initiate
Mating Function if necessary. (see section,
Changing Channels). Use the end of an
unfolded paper clip to access the button.
5. Belt Clip
("BC")
3. Low Battery LED
When the batteries are low (less than 15
minutes of battery life), the Low Battery LED
lights solid.
("FN")
FN
("LOW B")
2. Link LED
("LINK")
The LED lights solid when a wireless
connection is made between the Tx and Rx
units, and pulses when finding a connection
to one of over 65,000 channels (!)
LINK LOW B
4. Audio In Jack
Plug the 1/8" connector on the
included cable into the Audio In
Jack, and the 1/4" connector into
your guitar. This jack also acts as a
switch, turning the unit on when
the plug is inserted.
Unplug the cable to turn the unit
off.
("That Hole")
5