Troubleshooting; Helpful Hints - Black Box FX810A-R2 Instructions Manual

CAMPUS PAGER

6.1 Helpful Hints

Problem: After following all operating procedures, the Campus Pager isn't
reaching my pagers. What can I do to increase the range of transmission?
Solution:
1. Adjust or reposition the antenna to obtain optimum transmitting range.
2. Connect a base station antenna to substantially increase the Campus
Pager's transmitting range.
Problem: What can I do to reduce the interference on my phone when using
the Campus Pager?
Solution: Adjust or reposition the antenna and the antenna ground wire.
Problem: What can I do if my pager doesn't display a message code?
Solution:
1. Review operating procedures and try again.
2. Check the pager's batteries.
Problem: What do I do if my pager won't receive a message code?
Solution:
1. Verify the Campus Pager system code and correct pager code.
2. Complete the steps to store the pager code.
Problem: How can I use two Campus Pager base units with multiple pagers?
Solution: Set both of the Campus Pager base units to the same system code.
24

6. Troubleshooting