Installation; Positioning The Campus - Black Box FX810A-R2 Instructions Manual

Campus pager
Table of Contents

Advertisement

CAMPUS PAGER

4. Installation

4.1 Positioning the Campus Pager
You can operate the Campus Pager from a flat surface such as a table,
counter, or shelf. Or you can use the supplied wall-mount brackets to mount
it on a wall. Steel and concrete walls reduce the Campus Pager's transmitting
range. If the Campus Pager is located in a concrete or steel building, and part
of the coverage area is located outside the structure, place the unit and
antenna close to a window.
To mount the Campus Pager on a wall, follow these steps:
1. Slide the wall-mount brackets into the 2 wall-mount sockets, as shown in
Figure 4-1.
Figure 4-1. Connecting wall-mount brackets.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx810ae-r2Fx802aFx801a-r2

Table of Contents