Table of Contents
Advertisement
CAMPUS PAGER
2. Press CANCEL to clear display.
3. Press PROGRAM, then 0. The TRANSMIT display will show the stored
system code momentarily, then ___will appear (after pressing PROGRAM,
the display flashes).
GROUP
4. Enter a 3-digit system code. After about 1 second, the display shows
----, indicating that the system code is stored.
5. If you enter a wrong code, repeat Steps 2 through 4 to reset the system
code.
If your application requires more than 1000 system pagers, you can use
multiple Campus Pager systems. If using more than one Campus Pager,
each system should have a unique system code.
18
7
4
1
2
0
Figure 5-1. The Campus Pager Keypad.
8
9
5
6
3
P
PROGRAM
NOTE
CANCEL
PAGE
Advertisement
Table of Contents
