Table of Contents
Advertisement
4.2 Positioning the Antenna Ground Wire
For best transmission, fully extend the black antenna ground wire. Do not coil
this wire, as this will diminish the transmission efficiency.
4.3 Connecting Power to the Campus Pager
120 VAC P
(
OWER
Plug the power cord into a standard AC outlet.
The Campus Pager does not operate when AC power fails, but it maintains
the system code in memory. (See Section 4.6.) Because the Campus Pager
maintains its memory through power failure, there is no need to reprogram
the unit when power is restored. The Campus Pager can maintain this code
for more than one year without power.
12 VDC P
(
OWER
IN CAR
The Campus Pager can also operate from a 12 VDC power source, such as
in a car, truck, or boat that has a cigarette lighter. Simply connect the Campus
Pager to the cigarette lighter with an adapter cable (not included). In this
application, transmission range may be reduced.
4.4 Installing/Replacing Pager Batteries
The individual pager is powered by two AAA batteries (not supplied). We
recommend that you use alkaline batteries to power the pager.
To install or replace the pager's batteries, follow these steps:
1. Slide the battery compartment door open.
2. Insert two fresh alkaline batteries as indicated by the polarity symbols (+
and -) marked inside the compartment.
3. Slide the battery compartment door closed.
IN HOME OR OFFICE
,
,
TRUCK
OR BOAT
)
)
CAMPUS PAGER
15
Advertisement
Table of Contents
