Adjusting The 4 Mm Fixed-Focal Lens - GE Interlogix CyberScout Interlogix User Manual

CyberScout User Manual
2.9.2 A
DJUSTING THE
The focus of the 4 mm fixed-focal lens is set at the factory and should
not require adjustment. If it does, see Figure 27 and perform the
following:
1) Loosen the set screw.
2) Turn the lens to set the desired focus.
3) Tighten the set screw.
Note: To keep the camera in focus, you might have to adjust the lens while you
tighten the set screw.
Figure 27. Focusing the 4 mm fixed-focal lens
1038864A / December 2002
4 F -
MM IXED FOCAL
Installing the CyberScout
L
ENS
Set screw
Lens
29