Installing The Mount; Flush-Mount Adapter - GE Interlogix CyberScout Interlogix User Manual

CyberScout User Manual
2.2

INSTALLING THE MOUNT

The CyberScout line of miniature pan/tilt cameras can be mounted with
an assortment of mounting adapters. Specifics are detailed in the
following sections.
2.2.1 F -M
LUSH
1) Use the mounting template
(provided) to create the
opening necessary to mount
the adapter.
2) Follow your local building
codes for cutting the
mounting hole in the
mounting surface.
3) Pull the video, power, and control cables out of the mounting
surface and prepare the cables (as shown). They will connect to an
interface module in later steps.
Figure 6. Preparing the cables
1038864A / December 2002
A
OUNT DAPTER
Installing the CyberScout
Figure 5. Marking the mounting template
Video (terminate with BNC connector)
RS422 control (strip wire ends)
24 VAC power (strip wire ends)
11