Putting The Unit Into Operation - Defensor PH28 Operating Instructions Manual

16
4.5

Putting the unit into operation

Proceed as follows to put the Defensor PH28/PH28A into operation:
• PH28: fill the water tank (see chapter 5.1)
PH28A: open the shut-off valve in the water supply line.
• Connect unit to the mains.
CAUTION!
Make sure the required supply voltage (see type plate) matches the local mains voltage, oth-
erwise do not connect the Defensor PH28/PH28A to the mains!
CAUTION!
The Defensor PH28/PH28A must be connected only to grounded mains. Never connect the
unit to an outlet without protective earthing.
The Defensor PH28/PH28A is now ready for operation. The next chapter provides detailed informa-
tion on the operation of the unit.