Defensor PH28 Operating Instructions Manual page 35

The operating voltage is specified on the type plate located inside the unit.
DANGER!
Never use fuses that do not match the above specifications and do not bypass blown fuses as
this could rise danger to persons or material assets
6. Reinstall the fuse holder, the press the holder down until it properly engages.
7. Mount the terminal cover and tighten both mounting screws.
8. Insert and lock the water tank carriage
9. Reconnect the unit to the mains.
Replacing the ionizer electrodes
1. Shut down the Defensor PH28 and disconnect the unit from the mains (pull the mains plug out
of the socket).
2. Remove the water tank carriage
3. Replace the ionizer electrodes according to the opposite figure.
4. Tip the swivel plate down.
5. Insert and lock the water tank carriage
6. Reconnect the unit to the mains.
(see chapter 5.1).
(see chapter 5.1) and tip the swivel plate up.
(see chapter 5.1).
35