Table of Contents
Advertisement
30
6.2.2
Cleaning work
Unit component
Base tub, Retaining net,
Rotary humidification drum
Water tank
Evaporator mat
Air intake and air outlet grills
What to clean and how to clean
• Wash parts with a lukewarm soap solution and rinse
well with tap water.
• Occasionally remove scale coating with a household
decalcify agent (observe safety notes in chapter 6.3).
Finally rinse the parts well with tap water.
• Flush water tank with a lukewarm soap solution and
rinse well with tap water.
• Wash screw cap with a lukewarm soap solution and
rinse well with tap water.
Occasionally remove scale coating with a household
decalcify agent (observe safety notes in chapter 6.3).
Finally rinse the screw cap well with tap water.
• Rinse the evaporator mat thoroughly with lukewarm
water without any additives.
Note: As soon as the filter replacing message appears
in the display (see error messages in chapter 7) replace
the evaporator mat together with the coarse dust filters
(Quattro filters).
• Clean the air intake and air outlet grills on both sides
with a vacuum cleaner.
Advertisement
Table of Contents
