1
4.5
Putting the unit into operation
Proceed as follows to put the Defensor PH15/PH15A into operation:
• PH15: fill the water tank (see chapter 5.1)
PH15A: open the shut-off valve in the water supply line.
• Connect unit to the mains.
CAUTION!
CAUTION!
The Defensor PH15/PH15A is now ready for operation. The next chapter provides detailed informa-
tion on the operation of the unit.
Make sure the required supply voltage (see type plate) matches the local mains
voltage, otherwise do not connect the Defensor PH15/PH15A to the mains!
The Defensor PH15/PH15A must be connected only to grounded mains. Never
connect the unit to an outlet without protective earthing.