Fcc Warning; Ce-Mark Warning; Radio And Tv Interference; Ce Notice - Patton SL4020 Getting Started Manual

Smartlink analog voip soho router
Table of Contents

Advertisement

A • Compliance information

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause radio interference in which case the user will be required to correct the interference at his or her own
expense.

CE-Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.

Radio and TV Interference

The SmartLink router generates and uses radio frequency energy, and if not installed and used properly-that is,
in strict accordance with the manufacturer's instructions-may cause interference to radio and television recep-
tion. The SmartLink router have been tested and found to comply with the limits for a Class B computing
device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide
reasonable protection from such interference in a commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the SmartLink router does cause interference to radio
or television reception, which can be determined by disconnecting the unit, the user is encouraged to try to
correct the interference by one or more of the following measures: moving the computing equipment away
from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different
AC outlet (such that the computing equipment and receiver are on different branches).

CE notice

We certify that the apparatus identified in this document conforms to the requirements of Council Directive
1999/5/EC on the approximation of the laws of the member states relating to Radio and Telecommunication
Terminal Equipment and the mutual recognition of their conformity.
70
Disconnect all power before servicing.
The SmartLink router contains no user serviceable parts.
The mains outlet that is utilized to power the equipment
must be within 10 feet (3 meters) of the device and shall be
easily accessible.
Model 2616RC T-DAC Getting Started Guide
FCC Warning

Advertisement

Table of Contents
loading

Table of Contents