4.4 Rims
Use only those rims indicated in the general op-
erating permission documents. If you would like
to use other rims, you must consider the follow-
ing points:
Rules for the use of other rims:
- Size,
- mechanisms,
- compression depth and
- the load/bearing capacity must be sufficient
for the permissible total mass.
- The chuck cone of the fastening screw must
correspond to the rim mechanisms.
Modifications can only be made with
the manufacturer's permission.
The exact specifications can be
found in the general operation per-
mission documents.
Rules for wheel screws:
- Wheel screws should first be tightened after
50 km, then every 500 km.
Adjusting torque
- for steel rims:
- for aluminium rims:
WARNING: When changing rims
(steel -> aluminium / aluminium ->
steel) ensure that you are using the
correct wheel screws.
0 Nm
20 Nm
04-3