Rotating Stanchions - Hobby 400 SB Excellent Easy Operation Manual

Hobby camper motor home operation guide
Table of Contents

Advertisement

3.5 Rotating stanchions

Drawbars/Longitudinal beams
If you are not sure whether you have
overloaded the vehicle, weigh your
vehicle on a public vehicle scale.
Overloading can lead to malfunction
or even tire blowout!
This presents the danger of the
vehicle spinning out of control, which
endangers you as well as other dri-
vers and pedestrians.
The rotating stanchions are located in the front
and rear under the camper.
Turning the rotating stanchions outward
Park the vehicle as horizontally as possible.
On soft ground, lay a sturdy mat or suitably
sized board under the rotating stanchions to
prevent the camper from sinking.
Turn the rotating stanchions outward.
The rotating stanchions may only
be used for support, and not for lev-
eling out or raising.
Turning the rotating stanchions inward
With the crank, turn the rotating stanchions
inward to the horizontal position.
The crank for the rotating stanchions is located
at the front in the gas-bottle container. It is at-
tached firmly to the bottom of the container.
Bent or damaged drawbars must
be replaced immediately. Repairing
buckled drawbars is forbidden.
03-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents