02-2
Exterior
Go around the carriage and prepare for the drive
as follows:
Preparation of the vehicle
•
The camper must be hitched properly (see
guidelines for the safety hitch WS3000).
•
The pull rope must be connected to the base
vehicle.
• Tighten the tire bolts after driving the first 50
km.
• Plug the 13-channel plug in the socket of the
base vehicle.
•
Inspect the vehicle lighting.
•
Turn the winding stanchions and the front
landing wheel upward and secure them.
•
Close gas bottles (heating is forbidden while
driving).
• Empty the waste water tank.
•
Close gas bottle compartment.
•
Adjust outer mirrors on base vehicle.
•
Check camper's tire pressure (see tire
pressure table).
•
Close all windows.
• Close and firmly lock roof bonnet.
•
Shut off the light on the outer tent.
•
Close and secure entry door.
•
If necessary, pull electrical cord out of the
exterior socket.
•
If necessary, pull television antenna inward as
far as possible.
•
If necessary, secure the roof load and lash it
to prevent slippage.
•
If necessary, secure all bicycles and lash them
to prevent slippage, ensuring that they do not
cover any lighting equipment.
• In winter, the roof must be free of snow and
ice before you begin to drive.