Event Monitoring - Samsung SDS-P3042 User Manual

evenT monITorInG

This will display the channel in sync with a specific event (Motion/Tampering/Video Loss) if it occurs.
In "monitor > event display", set the event monitoring to ON/OFF and specify the event display time. (Page 51)
• If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
- 5~9 events : 9-split mode
- 10~16 events : 16-split mode
• If the second event occurs within the set time of <event display>, the first event will last until the second
one is terminated. (Page 51)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
`
Event occurrence
CH1
CH1
CH3
CH4
CH3
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first
`
event occurred in CH 1.
CH3
Event occurrence
CH1
CH1 CH2
CH3
CH1
CH1
CH1
M
J
CH1 CH2
CH2 CH2
CH1
CH4 CH1
CH2
CH1
CH1 CH3
CH2
CH1
CH1
CH1
Press the [ALARM] button to reset the alarm settings and to release the event mode.
`
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be
`
performed.
In case of continuous events such as motion detection, switching to another split mode display may not immediate if
`
concatenating events follow, even when you stopped alarm of the event.
5 seconds
CH1
Stop alarm
CH1
4 seconds
CH1 CH2
CH2
9 seconds
Stop alarm
English _31