Samsung SDS-P3042 User Manual page 45

• Screen Setup : The video appeared on the screen may vary
depending on the channel's camera, configure the DVR
display to your preferences.
Select a channel and adjust the <
(Contrast)>, and <
<
Press the <Init> to initialize settings back to the default 50.
`
• Privacy Region : You can specify a certain area of the
camera video to be protected for your privacy.
6. When the camera setup is done, press <OK>.
To set the privacy region
x Select <Privacy Region>.
y When "Privacy Region" window appears, select a
channel for detection and set the area of motion
detection.
• To set the area in "Privacy Region" window
In the "Privacy Region" window, select desired region
from <
• Privacy Region
You can specify up to 4 privacy zones for each channel,
which can be identified by the color.
1 Purple 2 Green 3
• To set the area using <Individual> selection
When selected <Individual>, "Privacy Region" window disappears and you can select cells one by one.
When the motion area setup is done, Right-click to select <Menu> in the context menu or the [MENU]
button on the remote control to display the "Privacy Region" window again.
- Clear All : Selected cell is removed from the Privacy Region.
- Menu : After selecting individual motion areas, move to the "Privacy Region"
window.
If selected <Apply to All CH>, selected motion area is applied to all channels.
`
z When completing the privacy zone settings, click <OK>.
(Brightness)>,
(Color)> of the selected channel.
>.
Blue 4 Yellow
Screen Setup
CH1 50 50 50 Init
OK Cancel
Privacy Region
CH1
Privacy Region1
Individual Apply to All CH
OK Cancel
Clear All
Menu
English _45
Apply to All CH