Connecting The Rs-485 Device; Connecting The Network - Samsung SDS-P3042 User Manual

connecting with other device

ConneCTInG The rS-485 devICe

Connect the rear [rS-485 +, –] port to the PTZ camera.
You can connect and control the PTZ camera which supports the RS-485 communication.
`
J
Check if the RS-485 device is compatible with the product first.
`
Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it.
`
Depending on camera's type, connection polarity can be different. For further information,
`
refer to the respective PTZ Camera's documentation.

ConneCTInG The neTWorK

The following figures are based on Model SDR-5102.
`
Connecting to network through ethernet (10/100BaseT)
18_ connecting with other device
IN 1
V ID E
O IN
IN 2
IN 3
IN 4
A U D IO
IN
A U D IO
Hub/Switcher
Windows
Network Viewer
e S A T
A
L A N
V G A
O U T
H D M
I
R S 4
8 5
U S B
D C 1
2 V
RJ-45 Ethernet Cable
(Direct Cable)
RS485
NETWORK
Hub/Switcher