Connecting And Setting The Network - Samsung SDS-P3042 User Manual

main menu

Connecting and Setting the Network

Networking may differ from the connection method, check your environment before setting the connection mode.
when no router is used
• Static mode
- Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR
and remote user.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <Static>.
Consult your network manager for IP Address, Gateway and
`
Subnet Mask.
• DHCP mode
- Internet connection : Connect the DVR directly to a cable
modem, DHCP PPPoE modem or FTTH network.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <DHCP>.
• PPPoE mode
- Internet connection : An PPPoE modem is directly connected to the DVR, where the PPPoE connection
requires user ID and password.
- DVR Network Settings : Set the <Connection Mode> in
<Interface> menu of the connected DVR to <PPPoE>.
<ID> and <Password> should be the same to the PPPoE user
`
information.
If you don't know the ID and password, consult your PPPoE service
provider.
64_ main menu
Connection Mode
Interface
Port
 IP Type Static
 Transfer Bandwidth 2Mbps
 IP Address 192.168.1.200
 Gateway 192.168.1.1
 Subnet Mask 255.255.255.0
 DNS Manual 168.126.63.1
OK Cancel
Connection Mode
Interface
Port
 IP Type PPPoE
 Transfer Bandwidth 600kbps
 IP Address 192.168.1.200
 Gateway 192.168.1.1
 Subnet Mask 255.255.255.0
 DNS Manual 168.126.63.1
 ID ID
 Password
************
OK Cancel