Table of Contents
Advertisement
TUNERMODE
Selectingthetunerinputsource
1 Select the TUNER input source with
»SOURCE« on the hi-fi system or »TUNER«
on the remote control.
– T he most recently selected station is played
(Last Station Memory).
– D isplay: »
« and station name or the fre-
quency.
Selectingpresets
1 Press
»+ PRESET
press » « or » « on the remote control.
Stereo/monoreception
If the hi-fi system is receiving a stereo broadcast,
»
« appears in the display. If the signal from
!
the stereo channel is weak, you can improve the
sound quality by switching to mono reception.
1 Press »
/
« to switch to mono reception.
7
!
– Display: »
« disappears.
!
2 To switch back to stereo, press »
again.
– Display: »
«.
!
RDSinformation
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
When the hi-fi system receives an RDS station,
the station name appears in the display, for ex-
ample »FANTASY« and »
Notes:
It may take some time before all the RDS
7
information is available.
GRUNDIG has no influence on the correct-
7
ness of this information.
SearchingforRDSstations
1 Search for the RDS station by pressing »
or »
« repeatedly until an RDS station is re-
4
ceived and »
– If the reception is strong enough, the station
name appears after a short time.
- ---------------------------------------------------------------------------------------------------------------------
–« on the hi-fi system or
/
«
7
!
«.
3
« appears in the display.
ViewingRDSinformation
If an RDS station is being received, information
can be opened up in the display.
1 Press »DISPLAY« repeatedly to cycle through
the information.
BAY 3
Displays the name of the radio station
(example)
being listened to.
POP M
Displays the type of station being lis-
(example)
tened to, e.g. Pop, Classic, News, etc.
If no station type code is transmitted,
NO PTY
»
Text
Displays the message about the sta-
tion being listened to as ticker text (if
offered).
18:00
Current time.
(example)
97.90
Displays the waveband and the fre-
(example)
quency of station being listened to.
RDStimesynchronisation
Some RDS stations transmit a time signal. If re-
ception is good, the time information will update
the time if you have selected the »CT
tion during the time setting, refer to "Setting the
clock„ at the "SETTINGS" section.
Time synchronisation can take several minutes,
and even with good reception the accuracy de-
pends on the time signal being transmitted. The
automatic time setting is always activated when
the device is switched from standby to tuner
mode and receives a RDS station.
Stationtypessearch(PTY)
1 Press »REP« to call up the station type search.
2 Repeatedly press »
desired station type and confirm with »REP«.
– T he search stops once a station of the se-
lected type is found.
3 Press »REP« to stop the search.
«
« appears on the display.
ON« op-
« or »
« select the
3
4
ENGLISH
13
Hide quick links:
Advertisement
Table of Contents
