Cassette­mode; Selecting The Cassette Input Source; Playback; Fast Forward And Reverse Search - Grundig UMS 2020 Manual

USB­AND­SD/SDHC/MMC­MODE
5 Press » « to start playback with the first file of
the first album.
– Display: elapsed playing time and informa-
tion of the file appear in the display.
Note:
To select an album, press »+« or »–« on the
7
hi-fi system or » « or » « on the remote
control, to select a file press »
» « on the hi-fi system or »
4
on the remote control.
Start playback by pressing »
CASSETTE­MODE­
Selecting­the­cassette­input­
source
1 Select the cassette input source with »SOURCE«
on the hi-fi system or »CASS« on the remote con-
trol.
– D isplay: »CASS«.

Playback

1 Open the front flap which is marked with
»OPEN« on the front panel.
2 Press » « to open the tape compartment.
7
3 Insert a cassette in the compartment with the
open side facing downwards and the full reel
on the left side and close the compartment.
4 Press »
« to start playback.
8
– T he button is automatically released at the
end of the tape, except if pause function has
been activated.
5 To pause playback press »II« and resume
playback by pressing »II« again.
6 End playback with »
Note:
The source cannot be changed while play-
7
ing or recording a cassette.
18­
ENGLISH
« or
3
« or »
5 6
«.
­-----------------------------------------------------------------------------------------------------------
«.
7
6 Stop playback with »
Caution:
Never remove memory cards during opera-
7
tion. This can damage the memory card and
the hi-fi system. This type of damage will in-
validate your warranty.
«
Fast­forward­and­reverse­search
1 In stop mode, press »
– » « rewinds to the beginning, »
3
fast forwards to the end.
Recording­onto­cassette
Erase­protection
Each new recording writes over the previous re-
cording.
You can protect your recordings against inad-
vertent deletion by breaking the protection tab in
the opening in the spine of the tape.
Purchased recordings on music tapes are al-
ready protected against accidental deletion.
If you wish to record on a protected tape, seal
the opening with adhesive tape.
Notes:
Only use NORMAL-type cassettes (IEC I) for
7
recording. CHROME (IEC II) or METAL (IEC
IV) tapes are not suitable.
The Ultra Bass System does not affect re-
7
cording.
­----------------------------------------------
/ «.
7
« or » «.
3 4
4
«