Mp3/Wma Displays; Programming Track Numbers - Grundig UMS 2020 Manual

CD­MODE
MP3/WMA­displays
You are provided with information of the artist,
album and title if such information is stored on
the CD, USB or SD (ID3 tag and ticker text).
1 Press »DISPLAY« on the remote control re-
peatedly to cycle through the information.
16­
ENGLISH
­---------------------------------------------------------------------------------------------------------------------------------------
Programming­track­numbers
Programme in the stop position to select and
store your disc tracks in the desired sequence.
If youlike, store any track more than once. Up to
32 tracks can be stored in the memory.
Selecting­and­storing­tracks­
1 Press »PROG« in the stop position.
– D isplay: »PROG« flashes, and »01« is dis-
played briefly.
2 Press » « or »
3 4
» « or » « on the remote control to select
5 6
your desired track number and confirm it with
»PROG«.
– D isplay: »PROG« flashes, and »02« is dis-
played briefly.
Note:
If you used a MP3/WMA file, select first the
7
album with » « or »
5
trol and confirm with »PROG«, then select
the desired track number and confirm it with
»PROG«.
3 Repeat step 2 to select and store all desired
tracks.
Playing­the­playlist
1 Start the playback with »
– D isplay: » « and »PROG«.
4
– T he playback starts with the first track.
2 Stop playback with »
3 Start playback again with »
Deleting­the­programme
1 Delete the programme by:
opening the CD compartment;
or
selecting another source.
– » PROG« disappears from the display.
« on the hi-fi system or
« on the remote con-
6
«.
/ «.
7
«.