Disinfecting; Disposal - Contec PM-60A User Manual

� Isopropanol (70%)
To clean your equipment, follow these rules:
1. Shut down the pulse oximeter and disconnect it from the power line.
2. Clean the display screen using a soft, clean cloth dampened with a glass cleaner.
3. Clean the exterior surface of the equipment using a soft cloth dampened with the
cleaner.
4. Wipe off all the cleaning solution with a dry cloth after cleaning if necessary.
5. Dry your equipment in a ventilated, cool place.

5 5 5 5 .3 .3 .3 .3 Disinfecting

Disinfecting Disinfecting
Disinfecting
Disinfection may cause damage to the equipment and is therefore not
recommended for this pulse oximeter unless otherwise indicated in your hospital's
servicing schedule.
Clean the pulse oximeter before disinfecting it.
The recommended disinfectants include: ethanol 70%, isopropanol 70%,
glutaraldehyde-type 2% liquid disinfectants.
CAUTION CAUTION CAUTION CAUTION
� � � � Never
Never Never use use EtO or or or or formaldehyde EtO EtO
Never use use EtO

5 5 5 5 .4 .4 .4 .4 Disposal

Disposal Disposal
Disposal
Dispose of the pulse oximeter in accordance with local environment and waste
disposal regulations. For the disposal of SpO2 sensor, follow local regulations
regarding disposal of hospital waste.
6. Appendix
6.1. Alarm Characters
6.1. 6.1. Alarm 6.1. Alarm Alarm Characters Characters Characters Specification:
Finger Out
SPO2 Sensor OFF
formaldehyde formaldehyde for for disinfection. disinfection.
formaldehyde for for disinfection. disinfection.
Specification:
Specification: Specification:
16