Function Button; New Patient Information Interface - Contec PM-60A User Manual

indicates that alarm sounds are paused.
11. Waveform Area:
This area displays SPO2 real time waveform.
12. Function button Area
4.1.2 Function
4.1.2 4.1.2 Function 4.1.2 Function

Function button:

Functions as follows:
4.2 4.2 New New Patient Patient
4.2 4.2 New New Patient Patient Information
Click the "
history interface. New
Users' can set up and store the personal information of the patient monitoring
currently. After the patient information is stored, it will return to the main menu. The
"
" button change into the
button:
button: button:
Enter the new patient case history menu. Patient's case history
should be set up and stored 10,000 at best .
Enter the data review menu. Review the monitoring data of
the current patient or the patients who had been stored
previously.
Enter the system setup menu.
Amend the system setup.
Press this button to make that alarm sounds are turned off.
The sounds of the heart murmur still are turned on.
Press this button to return to the main menu .
Information Information Interface Interface
Information Interface Interface
" button of the main interface to enter the
Patient information interface showed as followed:
Model 4-2-1 New Patient
" " button. Then click the button can store the
8
New patient case