Page 1
Manual CONTEC The document including some secret information, belongs to Contec medical systems co. LTD., in which any information is not allowed to be transmitted, copied ,or disclosed to any other companies except the recipient ones, even not for other commercial purposes.
This specification includes all the functions and operation flow, some usual questions and detailed answers offered. Please read the specification carefully before using this product to smooth your usage . Thanks for using PM-60A Pulse Oximeter products and look forward to your valuable suggestions and advice. PM-60A Website: http://www.contecmed.com.cn 1.1 Caution...
as well as in home care environment. WARNING WARNING WARNING WARNING This This pulse pulse oximeter oximeter oximeter is is is is intended intended intended only only by by clinical clinical professionals professionals professionals or or or or This This pulse pulse oximeter intended for for use...
History: Storage of latest 10000 case history by SD card. Permit to review momentarily. Alarm: Ajustable High and Low limits. Three level audible and visual alarm , latest 50 alarm information and waveform displays 8 seconds which 4 seconds are before a certain time when the alarm is turned on and 4 seconds are after appointed time when the alarm is turned on.
Page 7
Model 4-1-3 Main 1. Patient ID Area: This area shows the ID number of the patients monitoring currently. 2. Patient category Area: This area shows the patient range. Patients are classified as adult, pediatric and neonate. 3. System Time Area 4.
indicates that alarm sounds are paused. 11. Waveform Area: This area displays SPO2 real time waveform. 12. Function button Area 4.1.2 Function button: 4.1.2 4.1.2 4.1.2 Function Function Function button: button: button: Functions as follows: Enter the new patient case history menu. Patient’s case history should be set up and stored 10,000 at best .
personal information of the patient monitoring currently into the SD card. Data Review Interface 4.3 Data Data Data Review Review Review Interface Interface Interface 4.3.1 4.3.1 Data Data Review Review Interface Interface 4.3.1 4.3.1 Data Data Review Review Interface Interface Click the “...
TrendTable TrendTable Interface Interface TrendTable TrendTable Interface Interface showed as followed: Model 4-3-2 TrendTable The detailed information of the key as following: Max : The maximum of the Parameter data in the logical range Min: The minimum of the Parameter data in the logical range Ave: The average of the Parameter data in the logical range 4.3.3...
SpO2 desaturation event is defined as drop in SpO2 by at least N% for a minimum duration of L seconds. N and L are configurable, and is defaulted to 4 and 10. Pulse event is defined as change in pulse rate by at least N bpm( beats per minute) for a minimum duration of L seconds.
Page 12
Setup interface showed as followed: Model 4-4-1 Setup Instruction: Instruction: Instruction: Instruction: Monitoring Monitoring setting setting producer producer setting setting Options Options Options as as as as follows follows follows follows: : : : Monitoring Monitoring setting setting and and producer producer setting setting Options Item...
4.4.2 4.4.2 System System Setup Setup 4.4.2 4.4.2 System System Setup Setup Click the “ ” button of the Setup menu to enter the System Setup menu interface. System Setup menu interface showed as followed: Model 4-4-2 System Setup 4.4.2.1 1 1 1 ..4.4.2.
4. 4. 4. 4.4.2. 4.2. 4.2.3. 3. 3. 3. 4.2. Click “OK” to set new analysis parameters or click “Cancel” to leave them unchanged. All setting will turn back to manufacture's setting when Click “ ”button. 5 Maintenance and Cleaning Use only the substances approved by us and methods listed in this chapter to clean or disinfect your equipment.
delivered with accessories. delivered delivered delivered with with with the the accessories. accessories. accessories. 5 5 5 5 .1 .1 .1 .1 Safety Safety Checks Safety Safety Checks Checks Checks Before every use, or after your pulse oximeter has been used for 6 to 12 months, or whenever your pulse oximeter is repaired or upgraded, a thorough inspection should be performed by qualified service personnel to ensure the reliability.
� Isopropanol (70%) To clean your equipment, follow these rules: 1. Shut down the pulse oximeter and disconnect it from the power line. 2. Clean the display screen using a soft, clean cloth dampened with a glass cleaner. 3. Clean the exterior surface of the equipment using a soft cloth dampened with the cleaner.
Battery Too Low SPO2 Too High SPO2 Too Low PR Too High PR Too Low 6.2. Usual Metrical Range: 6.2. 6.2. 6.2. Usual Usual Usual Metrical Metrical Metrical Range: Range: Range: SPO2 1-99 PR 1-250...