Download Print this page
EarthWay M21 Series Operation And Assembly Manual

EarthWay M21 Series Operation And Assembly Manual

12-volt broadcast spreader

Advertisement

Quick Links

Operation and Assembly Manual
for the
M21 Series
EarthWay
®
12-volt Broadcast Spreader
5-YEAR LIMITED WARRANTY
EarthWay Products, Inc. warrants this product free of defects in original workmanship and materials for
a period of 5-Years to the end user with the original purchase receipt. If a manufacturing non-conformance
is found, EarthWay Products, Inc. at its discretion will repair or replace the part(s) or product at no charge
provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear
and tear as determined by EarthWay . EarthWay at its discretion may require that the part(s) or product
be returned along with the original purchase receipt at owners' expense for examination and compliance with
the terms of this warranty. (Do not return any product without first receiving authorization from EarthWay
Products, Inc.). To seek remedy under this warranty, contact EarthWay Products, Inc. at 574-848-7491,
Techsupport@earthway.com or write to ( EarthWay Products, Inc. P.O. Box 547 Bristol, Indiana 46507) and
describe the nature of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty covers only the
part(s) or product; any labor charges associated with repair or replacement of non-conformances are specifically
excluded. Due to the corrosive nature of most fertilizers and ice melt products, EarthWay Products, Inc.
makes no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or
its effects. Clean and dry your spreader thoroughly after each use, as a preventative measure, coat all metal parts
with a light oil or silicon spray.
Part # 52192

Advertisement

loading

Summary of Contents for EarthWay M21 Series

  • Page 1 5-Years to the end user with the original purchase receipt. If a manufacturing non-conformance is found, EarthWay Products, Inc. at its discretion will repair or replace the part(s) or product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by EarthWay .
  • Page 2: How To Operate Safely

    EarthWay ® Electric Spreaders Model M21 Series Always wear protective clothing, eye wear, and dust mask to prevent contact with chemicals and other materials being applied with this machine. Remove any material in the hopper before lifting or detaching this machine from the vehicle.
  • Page 3: Calibration Instructions

    OPERATING INSTRUCTIONS: Before filling hopper, become familiar with the operation of this spreader. (Practice the following steps)  Turn the motor switch to the ON POSITION, so that the impeller is turning before going on to the next step.  While driving forward pull and hold the Rope to the stop, this opens the shut-off plate on the spreader.  To stop the flow of material, release the rope and allow the spring to return the Shut-off to its closed position, then turn the motor off when finished.
  • Page 4: Ec Declaration Of Conformity

    EC Council Directives concerned with Machinery and Electromagnetic Compatibility. No alterations are to be made to the machine without prior consultation and approval of EarthWay Products, Inc. otherwise the Declaration may become invalid. This equipment must be commissioned, used and maintained strictly in accordance with the operating and maintenance instructions issued with the machine.
  • Page 5 WASHER FOR LINKAGES 12209 HOPPER BUSHING 12140 FRICTION WASHER (GAUGES) 60243 SHUT OFF PLATE ASSEMBLY (M21) 36219 1/4" X 3/8" SHOULDER BOLT SS M21 Series 19145 PULLEY LOWER (BP3106) (M21) 36301 10-24 NYLON INSERT LOCKNUT SS 60275 FRAME ASSEMBLY (M21S) 60423...