Download Print this page
EarthWay EV-N-SPRED M30 Operation And Assembly Manual

EarthWay EV-N-SPRED M30 Operation And Assembly Manual

12-volt atv broadcast spreader

Advertisement

Quick Links

Operation and Assembly Manual
M30
for the
12-volt ATV Broadcast Spreader
5-YEAR LIMITED WARRANTY
Earthway Products, Inc. warrants this product free of defects in original workmanship and materials for a
period of 5-Years to the end user with the original purchase receipt. If a manufacturing non-conformance
is found, Earthway Products, Inc. at its discretion will repair or replace the part(s) or product at no charge
provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal
wear and tear as determined by Earthway. Earthway at its discretion may require that the part(s) or product
be returned along with the original purchase receipt at owners' expense for examination and compliance
with the terms of this warranty. Do not return any product without first receiving authorization from
Earthway Products, Inc. To seek remedy under this warranty, contact Earthway Products, Inc. at 574-848-
7491, techsupport@earthway.com or write to Earthway Products, Inc. P.O. Box 547 Bristol, Indiana 46507 and
describe the nature of the manufacturing defect. SPECIFIC LIMITATIONS: This warranty covers only the part(s)
or product; any labor charges associated with repair or replacement of non-conformances are specifically
excluded. Due to the corrosive nature of most fertilizers and ice melt products, Earthway Products, Inc. makes
no warranty against and specifically excludes part(s) or product degradation or failure due to corrosion or its
effects. Only use granular materials, the use of Rock Salt or other large size material will void the warranty.
Clean and dry your spreader thoroughly after each use, as a preventative measure, coat all metal parts (inside
and outside of the steel tubing) with a light oil or silicon spray.
1-2012 Part # 52195

Advertisement

loading

Summary of Contents for EarthWay EV-N-SPRED M30

  • Page 1 5-Years to the end user with the original purchase receipt. If a manufacturing non-conformance is found, Earthway Products, Inc. at its discretion will repair or replace the part(s) or product at no charge provided the failure is not the result of incorrect installation, mishandling, misuse, tampering, or normal wear and tear as determined by Earthway.
  • Page 2 STEP 4: Next remove (#20) from (#11) Gauge & Lever assembly. Depending on whether the M30 is mounted to the front or rear rack, you will need to install (#11) Gauge & Lever assembly to either the right or left (#16) Frame tube to allow for use with the non-throttle hand.
  • Page 3: How To Operate Safely

    MOUNTING INSTRUCTIONS: Position the M30 on the vehicle so that the impeller is positioned to be able to spin clear of any part of the vehicle, this will allow a full 180 degree spread pattern. Secure the frame to the mounting location with the enclosed J-Bolts at positions that will secure the spreader so that it will not move when operating the vehicle.
  • Page 4: Calibration Instructions

    OPERATING INSTRUCTIONS: Before filling hopper, become familiar with the operation of this spreader. (Practice the following steps)  Turn the motor switch to the ON POSITION, so that the impeller is turning before going on to the next step.  While driving forward pull the lever back to the stop, this opens the shut off plate on the spreader.  To stop the flow of material, Push the lever to “0”...
  • Page 5: Ec Declaration Of Conformity

    EC Council Directives concerned with Machinery and Electromagnetic Compatibility. No alterations are to be made to the machine without prior consultation and approval of Earthway Products, Inc. otherwise the Declaration may become invalid. This equipment must be commissioned, used and maintained strictly in accordance with the operating and maintenance instructions issued with the machine.
  • Page 6 #8 X 3/8" PMT #8 HD COARSE BLACK 12316 HOPPER BLACK (M30) 12221 SHUT OFF PLATE 12209 HOPPER BUSHING 36211 10-24 X 3/4" PHMS S.S. 60511 WIRE HARNESS ASSEMBLY (M20/M30) 31165 1/4-20 X 1/2 HHMS ZINC 44287 "J" BOLT (M30/M20) 42273 CABLE BRACKET (M30) 12125 LEVER 36301...